Factory Bimini AFT CURTAIN (slanted to Transom area, not vertical) with Eisenglass window(s) for Bimini-Top (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2012-2014 digitized patterns approved by Cobalt® for the 273 No Tower: 273 Sports Cruiser cuddy without Tower:
Notes:
2012-2014 Cobalt® 273 No Tower Model Specific Details: The Cockpit Cover and Aft Curtains connect to the base of the transom with Bunjee cords. Please Email with your Hull Identification Number (HIN) for factory OEM recplacement canvas/covers pricing. The 12-digit HIN is embossed on the starboard side of your transom and on your registration papers. Cobalt® originally offered the 2012-2014 273 No Tower in Sunbrella® (or RECacril®)canvas with SeaMark® (or RECwater®)vinyl lined fabric for the Tops fabric.
Product Details: Zips onto OEM zippered Bimini-Top (Not included) and Side-Curtains (Not included). Curtain (typically angled to back of cockpit or transom) snaps to boat with included SS Snap-Stud-Screws. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Cobalt® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on OEM Cobalt® canvas are size #8 (6 teeth/inch). We do NOT provide mounting hardware for Bimini or Camper Top Frames, as Cobalt® supplied these (and the instructions) themselves. Cobalt® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Cobalt® boats over 2 years old. OEM canvas part number scheme: tag p/n [yyCBmmm mm tar-xxxxx-fcc] where [yy] is the year, [CB] is Cobalt, [mmm mm] is the model ([227 CC ] or [246 BR ] for example), [t] is the type of windshield (S=Std or W=optional stainless), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella acrylic, S=SeaMark) and [cc] is the color code. Cobalt® Hull Identification Number (HIN)HIN = COBsssssmbyy , where [yy] = model year.
Factory OEM canvas: BLI® tags
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White BLI® tags (the tags are approx. 2-3 inches x 4-5 inches),
The BLI® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2012,2013,2014} Cobalt® 273 No Tower: 273 Sports Cruiser cuddy without Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags ("cc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Side-Curtains with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
The Bimini Aft-Curtain is NOT needed IF the boat has a Camper-Top and Camper-Aft-Curtain at the back.
Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Not what you need? Try:
