Factory Bimini AFT CURTAIN with Eisenglass window(s) for Bimini-Top (not included) angles back to Transom area (not vertical), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2014 digitized patterns approved by Wellcraft® for the Sportsman 180 dual console:
Notes:
2007-2014 Wellcraft® Sportsman 180 Model Specific Details: Please Email for OEM canvas and cover information and prices. Wellcraft® originally offered the 2007-2014 Sportsman 180 in Sunbrella® fabric.
Product Details: Zips onto back of OEM zippered Bimini-Top (Not included) and typically goes back at an angle to the Transom area. Curtain snaps to boat with Stainless steel Canvas-Snaps (which are included but not installed in the canvas) or Bunjis in some cases. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Wellcraft® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Wellcraft® canvas are size #8 (6 teeth/inch). Most (NOT All) Wellcraft® Bimini Tops have zippered frame (bow) pockets for easy installation. Wellcraft® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Wellcraft® boats over 2 years old. Wellcraft® OEM canvas part number scheme: Ameritex® tags p/n [nnnxxxccc] OR Taylor-Made® tags p/n [nnnccccxxx], where [nnnn] identifies the boat (an internal code), [xxx] identifies the canvas piece and [ccc] is the color code. Wellcraft® Hull Identification Number (HIN) = WELpssssmbyy (1981-2010) or PWEpssssmbyy (2010-current) , where [yy] = model year.
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White (the tags are approx. 2-3 inches x 4-5 inches),
The ® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008,2009,2010,2011,2012,2013,2014} Wellcraft® Sportsman 180 dual console.
ONLY zips to Factory OEM Bimini-Top and Side-Curtains.
Verify AMERITEX or TAYLOR-MADE tags.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool Will be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Wellcraft® canvas are size #8 (6 teeth/inch). Most (NOT All) Wellcraft® Bimini Tops have zippered frame (bow) pockets for easy installation. Wellcraft® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews