Purchase Bimini Camper Valances Visor Curtains, SeaMark® fabric SET (Factory OEM) part number [110xxxccc] for 2008-2015 SeaSwirl® Striper 2901WA 2901WA Hard-Top with p/n [110xxxccc] canvas, NOT the 2901 Alaska Fiberglass Enclosure with Hard Windows
Boat Canvas Identification, Great Lakes, Arch, Bimini, Curtains, Camper.
Four Winns, Vista 298, 2003, Bimini Top, Bimini Visor, Bimini Side Curtains, Camper Top, Camper Side and Aft Curtains, Starboard side.
Images (random) of Bimini-Camper-Valances-Visor-Curtains-Seamark-SET-OEM-G8 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory 8 item (10-12 pieces) 4-sided enclosure replacement canvas set: Bimini and Camper Top canvas (Tops/Valances may have been SeaMark(r) prior to 2008 through 2018, now these are Sunbrella(r)) with Arch Valances, front window Connector panel(s), Bimini and Camper Side Curtains (pair each) and Camper Aft Curtain for factory installed Radar Arch (No Frames or Boots), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2008-2015 digitized patterns approved by SeaSwirl® for the Striper 2901WA: 2901WA Hard-Top with p/n [110xxxccc] canvas, NOT the 2901 Alaska Fiberglass Enclosure with Hard Windows:
Notes:
2008-2015 SeaSwirl® Striper 2901WA Model Specific Details: Production of the 2901WA was moved to Little Falls, MN in 2009 and Ameritex® p/n [110xxxccc] canvas was used thereafter. To tell which you have (if your tags are faded or missing): 1) The 108xxxccc Connector has 12-inch zippers to the Side Curtains, and the 110xxxccc Connector has 15-inch zippers; 2) The 108xxxccc Side Curtains have U-Shaped Zippered Windows, the 110xxxccc Side Curtains do not; 3) The 108xxxccc Aft Curtain has two sections of Keder Welt to slide into the track on the back of the Hard-Top, while the 110xxxccc has one long piece of Keder Welt. NOTE: The [108xxxccc] and [110xxxccc] canvas are not inter -changeable. SeaSwirl® originally offered the 2008-2015 Striper 2901WA in Black or Captain Navy Sunbrella® fabric.
Product Details: Complete, 8 item (10-12 pieces) factory Original Equipment Manufacturer (OEM) 4-sided enclosure replacement canvas set includes:
Bimini-Top replacement canvas with Valance (zipper strip to front of Arch), No frame,
Bimini-Visor (3 front panels),
Bimini-Side-Curtains (pair),
Camper-Top replacement canvas with Valance (zipper strip to back of Arch), No frame,
Camper-Side-Curtains (pair) and
Camper-Aft-Curtains.
Stainless steel canvas snaps are included but NOT installed in canvas, Snap Tool required,
Replacement canvas only,
Does NOT include Frames, Boot Covers, Bow Cover, Cockpit Cover, Mounting Hardware or any other canvas pieces,
The complete canvas set (Bimini Top, Sunshade Top, Valances, Visor, Side Curtains and Sunshade Aft Curtain) without frames will weigh between 32-42 pounds (14-19kg) and ship in a 56x27x8 inch (142x69x20 cm) box,
Factory Original Equipment Manufacturer (OEM) canvas made-to-order
SeaSwirl® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM SeaSwirl® canvas are size #8 (6 teeth/inch). Since SeaSwirl® made few changes to their boats over the years, this canvas MAY fit earlier models, especially Striper Hard-Top boats. This canvas will NOT fit earlier model bimini top frames, which were made by another manufacturer, but you can replace the bimini frame and canvas for a good fit on earlier models. Most (NOT All) SeaSwirl® Bimini Tops have zippered frame (bow) pockets for easy installation. SeaSwirl® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for SeaSwirl® boats over 2 years old. SeaSwirl® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is color code. SeaSwirl® Hull Identification Number (HIN) = BRCsssssmbyy (1972-2001), GSSsssssmbyy (2001-2010) or IJSsssssmbyy (2010-current) , where [yy] = model year.
Factory OEM canvas: Ameritex® tags p/n [110xxxccc - SS 2901 WA HT ]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [110xxxccc - SS 2901 WA HT ] (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2008-2015 SeaSwirl® Striper 2901WA: 2901WA Hard-Top with p/n [110xxxccc] canvas, NOT the 2901 Alaska Fiberglass Enclosure with Hard Windows.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [110xxxccc - SS 2901 WA HT ] ("ccc" is the color code).
Fits on the Factory original OEM Bimini and Camper Top Frames ONLY (frames NOT included), and zips to factory Radar Arch using the Valance zipper strips.
The Visor and Side-Curtains zip to the tops and attach to the windshield with snaps or sliding rubber seals.
The Side and Aft Curtains zip to the tops and attach to the fiberglass boat using canvas snaps (provided but NOT installed).
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship SeaSwirl Bimini-Camper-Valances-Visor-Curtains-Seamark-SET-OEM-G8 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.