Images (random) of Bimini-Sunshade-Visor-Curtains-SET-Seamark-OEM-G24 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory 7 item (10 piece) 4-sided enclosure replacement canvas set: Bimini and Sunshade Top canvas with Valances (Tops/Valances may have been SeaMark(r) prior to 2008 through 2018, now these are Sunbrella(r)), front window Connector panel(s), Bimini Side Curtains (pair each) and Sunshade Aft Curtain for factory installed Radar Arch (No Frames or Boots), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2001-2001 digitized patterns approved by Sea Ray® for the 300 Sundancer: 300DA Sundancer with factory installed, forward facing Radar Arch (Spoiler):
Notes:
2001-2001 Sea Ray® 300 Sundancer Model Specific Details: The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. The Sunshade Top behind the Arch is offered with an angled Sunshade Aft Curtain OR a 'stand-up' Camper Top with Side and Aft Curtains. The 2001 300DA was an early release of the new 2002 300DA. Sea Ray® originally offered the 2001-2001 300 Sundancer in Mediterranean Blue Tweed, Hunter Green Tweed, Toast Tweed and Linen Tweed Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
Product Details: Complete, 7 item (10 pieces) factory Original Equipment Manufacturer (OEM) 4-sided enclosure replacement canvas set includes:
Bimini-Top replacement canvas (no frame),
Bimini-Valance (zipper strip to attach Bimini to Arch),
Bimini-Visor(3 front panels),
Bimini-Side-Curtains (pair),
Sunshade-Top replacement canvas (no frame),
Sunshade Valance 9zipper strip to attach Sunshade to Arch), and
Sunshade-Aft-Enclosure-Curtain.
Stainless steel canvas snaps are included but NOT installed in canvas, Snap Tool required,
Replacement canvas only,
Does NOT include Frames, Boot Covers, Bow Cover, Cockpit Cover, Mounting Hardware or any other canvas pieces.
The complete canvas set (Bimini Top, Sunshade Top, Valances, Visor, Side Curtains and Sunshade Aft Curtain) without frames will weigh between 32-42 pounds (14-19kg) and ship in a 56x27x8 inch (142x69x20 cm) box,
Factory Original Equipment Manufacturer (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2001-2001 Sea Ray® 300 Sundancer: 300DA Sundancer with factory installed, forward facing Radar Arch (Spoiler).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [01SR300 DA SA1 -x0xxx-fcc], Sea Ray® p/n [1xxxxxx] ("cc" is the color code).
Fits on the Factory OEM Bimini and Sunshade Top Frames ONLY (frames NOT included).
The Bimini and Sunshade tops attach to the Factory installed (NOT after-market) Radar Arch using Valances (provided) which zip to the tops and have Keder Welt which slides into the tracks on the front and back of the Factory Radar Arch.
The Visor and Side-Curtains zip to the tops and attach to the windshield with snaps or sliding rubber seals.
The Bimini-Side-Curtains and Sunshade-Aft-Enclosure-Curtains zip to the tops and attach to the fiberglass boat using canvas snaps (provided but NOT installed).
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Bimini-Sunshade-Visor-Curtains-SET-Seamark-OEM-G24 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.