Purchase Bimini Top Frame (Factory OEM) part number [10656xccc Canvas] for 2006-2007 Chris Craft® Launch 22 22 Launch bowrider with or without Wakeboard Tower (22LH)
Chris Craft, Launch 22, 2007, Bimini Top Folded Down, Bow Cover, Cockpit Cover, Starboard Front.
Chris Craft® Launch 22 shown with Bimini-Top-Frame-OEM-T0.2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2006-2007 digitized patterns approved by Chris Craft® for the Launch 22: 22 Launch bowrider with or without Wakeboard Tower (22LH):
Notes:
2006-2007 Chris Craft® Launch 22 Model Specific Details: Aluminum frames. The Bimini Top is above the windshield. The Convertible Top attaches to top of the windshield. Both tops work with the Wakeboard Tower. Front Connector, Side and Aft Curtains were not offered to enclose the 22 Launch. The OEM Mooring Cover is no longer available. Chris Craft® originally offered the 2006-2007 Launch 22 in Captain Navy, Sapphire Blue, Sky Blue, Forest Green, Spa Green, Taupe (no longer available, replaced by similar Linen), Toast, Burgundy, Jockey Red and Yellow Sunbrella® with White Zippers fabric.
Product Details: Framework only. Order canvas and mounting hardware separately. A Bimini-Top stands above the cockpit (not connected directly to the windshield frame), while a Convertible-Top connects to the top of the windshield.
Chris Craft® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Per Chris Craft®, we can NOT sell factory OEM Canvas and Covers direct for Chris Craft® boats less than 8 years old (we can sell 2016 and earlier in 2024 for example). Zippers on OEM Chris Craft® canvas are size #8 (6 teeth/inch). MSome (NOT All) Boot-Covers have Chris Craft® logo. Most (NOT All) Chris Craft® Tops have zippered frame (bow) pockets for easy installation. Chris Craft® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). OEM canvas part number scheme: [xxx] identifies the canvas piece and [ccc] is the color code. HIN = CCxsssssmbyy , where [yy] = model year.
Factory OEM canvas: Ameritex® tags p/n [10656xccc - CC 22/23 LH/LL Canvas], [10657xccc - CC 22/23 LH/LL Bow Cover and std Cockpit Cover] and [108231ccc - CC 22/23 LH/LL Cockpit-Cover with WakeTower]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [10656xccc - CC 22/23 LH/LL Canvas], [10657xccc - CC 22/23 LH/LL Bow Cover and std Cockpit Cover] and [108231ccc - CC 22/23 LH/LL Cockpit-Cover with WakeTower] (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007} Chris Craft® Launch 22: 22 Launch bowrider with or without Wakeboard Tower (22LH).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [10656xccc - CC 22/23 LH/LL Canvas], [10657xccc - CC 22/23 LH/LL Bow Cover and std Cockpit Cover] and [108231ccc - CC 22/23 LH/LL Cockpit-Cover with WakeTower] ("ccc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
Only fits factory OEM Bimini-Top Canvas.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Ships in a 96inch x 5inch x 69inch Box weighing approximately 25pounds.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Chris Craft Bimini-Top-Frame-OEM-T0.2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.