Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2008-2017 digitized patterns approved by Ranger® for the 2050 Reata: 2050, 2050LS and 2050MS Reata Fish and Ski:
Notes:
2008-2017 Ranger® 2050 Reata Model Specific Details: Aluminum top frame bows. Side-Curtain have U-Shaped zippered windows with screens. Size #8 (6 teeth/inch) zippers. Front Connector snaps to top of windshield. No Bow or Cockpit Cover offered. Ranger® originally offered the 2008-2017 2050 Reata in Cadet Grey or Linen Sunbrella® fabric.
Product Details: Framework only. Order canvas and mounting hardware separately. A Bimini-Top stands above the cockpit (not connected directly to the windshield frame), while a Convertible-Top connects to the top of the windshield.
Ranger® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Dowco®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Ranger® canvas are size #8 (6 teeth/inch). Most (NOT All) Ranger® Bimini Tops have zippered frame (bow) pockets for easy installation. Ranger® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Ranger® boats over 2 years old. Ranger® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags p/n [xxxxxxccc] or [xxxccccxx], where [xxx] identifies the canvas piece and [cccc] is the color code. Ranger® Hull Identification Number (HIN) = RNJsssssmbyy (1972-2010), RGRsssssmbyy (2010-current) , where [yy] = model year.
Factory OEM canvas: Ameritex® tags p/n [1088xxccc] or [1090xxccc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [1088xxccc] or [1090xxccc] (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2008,2009,2010,2011,2012,2013,2014,2015,2016,2017} Ranger® 2050 Reata: 2050, 2050LS and 2050MS Reata Fish and Ski.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1088xxccc] or [1090xxccc] ("ccc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
Only fits factory OEM Bimini-Top Canvas.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Ships in a 96inch x 5inch x 69inch Box weighing approximately 25pounds.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Ranger Bimini-Top-Frame-OEM-T1.3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
For Ameritex® (Not Dowco®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Ranger® canvas are size #8 (6 teeth/inch). Most (NOT All) Ranger® Bimini Tops have zippered frame (bow) pockets for easy installation. Ranger® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews