Purchase
Bimini Top Frame (Factory OEM)
part number [106xxxccc S-LB 310 R/A]
for 2007-2008 Larson®
Cabrio 310 Mid-Cabin and Axius with factory installed, Aft Facing Radar Arch

Larson® Cabrio 310 Bimini-Top-Frame-OEM-T1.6™ Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer)

Larson, Cabrio 310, 2007, Bimini Top, Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Starboard Front.

Larson, Cabrio 310, 2007, Bimini Top, Connector, Side Curtains, Camper Top, Camper Side Curtains, Starboard Front.

Larson® Cabrio 310 shown with Bimini-Top-Frame-OEM-T1.6
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2007-2008 Larson Cabrio 310...
• Everything we have for Larson 310 boats... and we have Bimini-Top-Frame for these other boats...

Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2007-2008 digitized patterns approved by Larson® for the Cabrio 310 Mid-Cabin and Axius with factory installed, Aft Facing Radar Arch:

Notes: Framework only. Order canvas and mounting hardware separately. A Bimini-Top stands above the cockpit (not connected directly to the windshield frame), while a Convertible-Top connects to the top of the windshield.
- Factory OEM canvas: Ameritex® tags p/n [106xxxccc S-LB 310 R/A]
- TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
  1. White Ameritex® tags p/n [106xxxccc S-LB 310 R/A] (the tags are approx. 2-3 inches x 4-5 inches),
  2. The Ameritex® logo embossed on the heads of the stainless canvas snaps,
  3. The Zipper Size listed above (#8 in most cases) on all zippers.
- Other Factory OEM canvas, frames and covers for the 2007-2008 Larson Cabrio 310 are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008} Larson® Cabrio 310 Mid-Cabin and Axius with factory installed, Aft Facing Radar Arch.
2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [106xxxccc S-LB 310 R/A] ("ccc" is the color code).
3. WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
4. Only fits factory OEM Bimini-Top Canvas.
5. Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
6. Ships in a 96inch x 5inch x 69inch Box weighing approximately 25pounds.
7. Check the 2007-2008 Larson® Cabrio 310 Model-Specific-Information abovefor any other size/fit notes and zipper size.
8. Does NOT fit Larson® Cabrio 310 prior to 2007.
9. Does NOT fit Larson® Cabrio 310 after 2008.
10. Does NOT fit any year/make/model other than the 2007-2008 Larson® Cabrio 310.
Options:
Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Larson® from 2007 to 2008 for the Larson Cabrio 310
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:

Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.

You can count on all of the above or we will repair or replace the item in question.
Warranty: This product is covered by the Ameritex® 1 Year Manufacturer Warranty.
Reviews: RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
★★★★✬

Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.

Your Boat: Larson Cabrio 310 (2007-2008)
12-digit HIN: (required)
Your 12-digit Hull-Identification-Number (HIN) (LARsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bimini Top Frame (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

Please enter Ameritex® Part Number from Sticker on YOUR FRAME : (required)

Please enter Ameritex® DT date from Sticker on your FRAME : (required)

Price: $1,620.41
Unfortunately, we can no longer sell canvas or covers for Larson boats older than 2009.

+ Shipping to

This product is not available for purchase at this time...

Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Larson Bimini-Top-Frame-OEM-T1.6 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 3.144.202.167 US

$1,620.41

Unfortunately, we can no longer sell canvas or covers for Larson boats older than 2009.

RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews

★★★★✬

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Bimini-Top-Frame-OEM-T1.6&manufacturer=Larson&model=Cabrio+310&yearfrom=2007&yearto=2008&partno=106xxxccc%20S-LB%20310%20R%2FA

Purchase Bimini Top Frame (Factory OEM) part number [106xxxccc S-LB 310 R/A] for 2007-2008 Larson® Cabrio 310 Mid-Cabin and Axius with factory installed, Aft Facing Radar Arch

Purchase
Bimini Top Frame (Factory OEM)
part number [106xxxccc S-LB 310 R/A]
for 2007-2008 Larson®
Cabrio 310 Mid-Cabin and Axius with factory installed, Aft Facing Radar Arch