Purchase Bimini Top Frame (Factory OEM) part number [1007xxccc - S-CC 26CON] for 2001-2003 Chris Craft® Constellation 26 26 Constellation (no Arch)
Chris Craft, Constellation 26, 2001, Bimini Top, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Port Front.
Chris Craft, Constellation 26, 2003, Bimini Top, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Captain Navy Sunbrella, Port Front.
Chris Craft® Constellation 26 shown with Bimini-Top-Frame-OEM-T1.8 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2001-2003 digitized patterns approved by Chris Craft® for the Constellation 26: 26 Constellation (no Arch):
Notes:
2001-2003 Chris Craft® Constellation 26 Model Specific Details: Camper Side and Aft Curtains have U-Shaped Zippered windows with screens. Stainless steel top frames. Chris Craft® originally offered the 2001-2003 Constellation 26 in Black, Captain Navy, Forest Green or Jockey Red Sunbrella® fabric.
Product Details: Framework only. Order canvas and mounting hardware separately. A Bimini-Top stands above the cockpit (not connected directly to the windshield frame), while a Convertible-Top connects to the top of the windshield.
Chris Craft® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Per Chris Craft®, we can NOT sell factory OEM Canvas and Covers direct for Chris Craft® boats less than 8 years old (we can sell 2016 and earlier in 2024 for example). Zippers on OEM Chris Craft® canvas are size #8 (6 teeth/inch). MSome (NOT All) Boot-Covers have Chris Craft® logo. Most (NOT All) Chris Craft® Tops have zippered frame (bow) pockets for easy installation. Chris Craft® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). OEM canvas part number scheme: [xxx] identifies the canvas piece and [ccc] is the color code. HIN = CCxsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2001,2002,2003} Chris Craft® Constellation 26: 26 Constellation (no Arch).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1007xxccc - S-CC 26CON] ("ccc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
Only fits factory OEM Bimini-Top Canvas.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Ships in a 96inch x 5inch x 69inch Box weighing approximately 25pounds.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Chris Craft Bimini-Top-Frame-OEM-T1.8 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Per Chris Craft®, we can NOT sell factory OEM Canvas and Covers direct for Chris Craft® boats less than 8 years old (we can sell 2016 and earlier in 2024 for example). Zippers on OEM Chris Craft® canvas are size #8 (6 teeth/inch). MSome (NOT All) Boot-Covers have Chris Craft® logo. Most (NOT All) Chris Craft® Tops have zippered frame (bow) pockets for easy installation. Chris Craft® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews