Purchase
Bimini Visor (Factory OEM)
for 2005-2006 Cobalt®
360 Express Cruiser with forward facing Radar Arch

Cobalt® 360 Bimini-Visor-OEM-G™ Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer)
Cobalt, 360, 2005, Bimini Top, Visor, Side Curtains, inside.
Cobalt® 360 shown with Bimini-Visor-OEM-G
(additional canvas pieces or covers may also be shown above, click images to enlarge)


American Boat Canvas™, Inc."s ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2005-2006 Cobalt 360...
• Everything we have for Cobalt 360 boats... and we have Bimini-Visor for these other boats...
Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2005-2006 digitized patterns approved by Cobalt® for the 360 Express Cruiser with forward facing Radar Arch:
  • Notes:
    • 2005-2006 Cobalt® 360 Model Specific Details: Coablt® made their own Cockpit-Cover in-house, so we do not have it. Cobalt® originally offered the 2005-2006 360 in Sunbrella® (or RECacril®)canvas with SeaMark® (or RECwater®)vinyl lined fabric for the Tops fabric.
    • Product Details: The Visor is the entire clear Eisenglass (clear vinyl) window or window set (typically 3 individual sections, but 1 or 2 on some boats) that zip together above the windshield (typically the center section zips open). The Visor either snaps onto or slides into a track at the top of the windshield (this will be exactly as per original, either snaps or rubber slide). The Visor has Zippers on the top for the Bimini-Top (Not included) and each side (Port and Starboard) for the Bimini-Side-Curtains (Not included, if so equipped) to form the front part of a complete eisenglass enclosure. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
    • Cobalt® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on OEM Cobalt® canvas are size #8 (6 teeth/inch). We do NOT provide mounting hardware for Bimini or Camper Top Frames, as Cobalt® supplied these (and the instructions) themselves. Cobalt® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Cobalt® boats over 2 years old. OEM canvas part number scheme: tag p/n [yyCBmmm mm tar-xxxxx-fcc] where [yy] is the year, [CB] is Cobalt, [mmm mm] is the model ([227 CC ] or [246 BR ] for example), [t] is the type of windshield (S=Std or W=optional stainless), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella acrylic, S=SeaMark) and [cc] is the color code. Cobalt® Hull Identification Number (HIN)HIN = COBsssssmbyy , where [yy] = model year.
    • Factory OEM canvas: BLI® tags
    • TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
      1. White BLI® tags (the tags are approx. 2-3 inches x 4-5 inches),
      2. The BLI®  logo embossed on the heads of the stainless canvas snaps,
      3. The Zipper Size listed above (#8 in most cases) on all zippers.

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2005,2006} Cobalt® 360 Express Cruiser with forward facing Radar Arch.
    2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags ("cc" is the color code).
    3. ONLY zips to Factory OEM Bimini-Top Frame, Visor and Side-Curtains (NOT included).
    4. Factory OEM #8 Zippers Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
    5. Will NOT fit after-market top or canvas.
    6. Zips to front of OEM Bimini-Top.
    7. Attaches to OEM windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
    8. Snaps are included, but NOT installed in the canvas (to allow perfect alignment on install), so you will need a Snap Installation Tool for snaps (includes male snap-screw-studs OR windshield clip-on snaps if needed).
    9. Check the 2005-2006 Cobalt® 360 Model-Specific-Information abovefor any other size/fit notes and zipper size.
    10. Does NOT fit Cobalt® 360 prior to 2005.
    11. Does NOT fit Cobalt® 360 after 2006.
    12. Does NOT fit any year/make/model other than the 2005-2006 Cobalt® 360.

  • Options:
  • 100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
    • Will fit your boat to the specs provided,
    • Will match your existing GLBT canvas,
    • Will perform as described when installed properly,
    • Will completely satisfy you with the quality and construction.
    You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.


  • Warranty: This product is covered by the Manufacturer's Warranty.

  • Installation: Canvas and Snap Installation Instructions

  • Maintenance and Care: Canvas and Eisenglass Care and Maintenance

  • Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
    ★★★★★



    The Bimini-Visor-OEM-G is not priced for a {2005,2006} Cobalt 360 ...

    Let us check and see if it has a different price (Bimini-Visor-OEM-Gx) than the link from the web has...

    We are sorry, but Bimini-Visor-OEM-G is Not Listed for this boat (yet)...



Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
 © 2021-2024, partner
Virginia, USA
Email InfoG@RNR-Marine.com
COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 18.218.61.16 US











American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Scroll down to
select options and purchase...







Made in USA

© 2021-2024, American Boat Canvas™, Inc.


Page: http://rnr-marine.com/Purchase.php?product=Bimini-Visor-OEM-G&manufacturer=Cobalt&model=360&yearfrom=2005&yearto=2006