Purchase
Bimini Visor (Factory OEM)
part number [Hard-Top: 01BW26 CQ HNr-xxxxx-Acc]
for 2001-2001 Boston Whaler®
Conquest 26 walk around cuddy with factory installed Top

Bimini-Visor-OEM-G3™Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer)
Boat Canvas Identification, Bimini, Valance, Visor, Side Curtains.
Image (random) of Bimini-Visor-OEM-G3
(additional canvas pieces or covers may also be shown above, click images to enlarge)


American Boat Canvas™, Inc."s ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2001-2001 Boston Whaler Conquest 26...
• Everything we have for Boston Whaler 26 boats... and we have Bimini-Visor for these other boats...
Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2001-2001 digitized patterns approved by Boston Whaler® for the Conquest 26 walk around cuddy with factory installed Top:
  • Notes:
    • 2001-2001 Boston Whaler® Conquest 26 Model Specific Details: Weather Curtain Set is Visor plus Side Curtains. Boston Whaler® originally offered the 2001-2001 Conquest 26 in Captain Navy, Cadet Grey, Forest Green and Jockey Red Sunbrella® fabric.
    • Product Details: The Visor is the entire clear Eisenglass (clear vinyl) window or window set (typically 3 individual sections, but 1 or 2 on some boats) that zip together above the windshield (typically the center section zips open). The Visor either snaps onto or slides into a track at the top of the windshield (this will be exactly as per original, either snaps or rubber slide). The Visor has Zippers on the top for the Bimini-Top (Not included) and each side (Port and Starboard) for the Bimini-Side-Curtains (Not included, if so equipped) to form the front part of a complete eisenglass enclosure. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
    • Boston Whaler® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on OEM Boston Whaler® canvas are size #8 (6 teeth/inch). Boston Whaler® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Boston Whaler® boats over 2 years old. The Boston Whaler® OEM canvas part number scheme: [xxxxx] identifies which canvas piece, [cc] is the color code. Boston Whaler® Hull Identification Number (HIN) = BWCsssssmbyy , where [yy] = model year.
    • Factory OEM canvas: GLBT tags p/n [Hard-Top: 01BW26 CQ HNr -xxxxx-Acc] or [Bimini Top: 01BW26 CQ SNr -xxxxx-Acc], Boston Whaler® p/n [1xxxxxx]
    • TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
      1. White GLBT tags p/n [Hard-Top: 01BW26 CQ HNr -xxxxx-Acc] or [Bimini Top: 01BW26 CQ SNr -xxxxx-Acc], Boston Whaler® p/n [1xxxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
      2. The GLBT p/®  logo embossed on the heads of the stainless canvas snaps,
      3. The Zipper Size listed above (#8 in most cases) on all zippers.

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the 2001 Boston Whaler® Conquest 26 walk around cuddy with factory installed Top.
    2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [Hard-Top: 01BW26 CQ HNr -xxxxx-Acc] or [Bimini Top: 01BW26 CQ SNr -xxxxx-Acc], Boston Whaler® p/n [1xxxxxx] ("cc" is the color code).
    3. ONLY zips to Factory OEM Bimini-Top Frame, Visor and Side-Curtains (NOT included).
    4. Factory OEM #8 Zippers Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
    5. Will NOT fit after-market top or canvas.
    6. Zips to front of OEM Bimini-Top.
    7. Attaches to OEM windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
    8. Snaps are included, but NOT installed in the canvas (to allow perfect alignment on install), so you will need a Snap Installation Tool for snaps (includes male snap-screw-studs OR windshield clip-on snaps if needed).
    9. Check the 2001-2001 Boston Whaler® Conquest 26 Model-Specific-Information abovefor any other size/fit notes and zipper size.
    10. Does NOT fit Boston Whaler® Conquest 26 prior to 2001.
    11. Does NOT fit Boston Whaler® Conquest 26 after 2001.
    12. Does NOT fit any year/make/model other than the 2001-2001 Boston Whaler® Conquest 26.

  • Options:
  • 100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
    • Will fit your boat to the specs provided,
    • Will match your existing GLBT canvas,
    • Will perform as described when installed properly,
    • Will completely satisfy you with the quality and construction.
    You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.


  • Warranty: This product is covered by the Manufacturer's Warranty.

  • Installation: Canvas and Snap Installation Instructions

  • Maintenance and Care: Canvas and Eisenglass Care and Maintenance

  • Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
    ★★★★★


  • Lead-Time (Estimated): We no longer sell this product.

  • Your Boat: Boston Whaler Conquest 26 (2001-2001)
  • 12-digit HIN: (required)
    • Your 12-digit Hull-Identification-Number (HIN) (BWCsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
    • The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bimini Visor (Factory OEM),
    • Based on the model (Boston Whaler Conquest 26) and HIN you provide, we will verify:
      • the exact, correct revision of the Bimini Visor (Factory OEM) pattern to use,
      • the correct fabric and the color(s) originally offered from the factory by Boston Whaler® for the 2001-2001 Boston Whaler Conquest 26,
    • Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.
  • Material/Colors:
    1. Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),Sunbrella® Logo
    2. Select Fabric/Color: any color Sunbrella® marine fabric. Boston Whaler® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Boston Whaler® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Boston Whaler® for the 2001-2001 Boston Whaler® Conquest 26: Captain Navy, Cadet Grey, Forest Green and Jockey Red Sunbrella®, with 30ga Eisenglass clear vinyl window material

  • Price: $837.87
    We are not selling this online as of 2024

        + Shipping to

    This product is not available for purchase at this time...

  • Shipping Notes:
    • Signature required for delivery,
    • Can NOT ship to Post Office (PO) Box,
    • Can NOT change your address after order is placed,
    • Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
    • Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
    • Check shipment for damage upon receipt and file claim with shipper.

  • International Shipments:
    • We do NOT ship Boston Whaler Bimini-Visor-OEM-G3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
    • Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
    • Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
 © 2021-2024, partner
Virginia, USA
Email InfoG@RNR-Marine.com
COMPUTER claudebot 3.237.91.98 US












$837.87

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Scroll down to
select options and purchase...







Made in USA

© 2021-2024, American Boat Canvas™, Inc.


Page: http://rnr-marine.com/Purchase.php?product=Bimini-Visor-OEM-G3&manufacturer=Boston+Whaler&model=Conquest+26&yearfrom=2001&yearto=2001&partno=Hard-Top:%2001BW26%20CQ%20HNr%20-xxxxx-Acc