Purchase Camper Aft-Curtain (Factory OEM) part number [06BA405 SN1-x0xxx-Acc] for 2006-2006 Baja® 405 Performance No Arch 405 Performance WithOUT Radar Arch
Camper-Top-Aft-Curtain-OEM-G3.5 for 2006-2006 405 Performance No Arch
Baja, 405 Performance No Arch, 2006, Camper Top Mounting Hardware.
Baja® 405 Performance No Arch shown with Camper-Top-Aft-Curtain-OEM-G3.5 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2006-2006 digitized patterns approved by Baja® for the 405 Performance No Arch: 405 Performance WithOUT Radar Arch:
Notes:
2006-2006 Baja® 405 Performance No Arch Model Specific Details: 2006-2006 Baja® 405 Performance WithOUT Radar Arch. Stainless Steel Top Frames. Baja® originally offered the 2006-2006 405 Performance No Arch in Black, Royal Navy, Cadet Grey, Jockey Red and Purple (no longer available) Sunbrella® fabric. Part Numbers: 2006-2006 Baja® 405 Performance No Arch factory OEM canvas, covers & frames have OEM tags p/n [06BA405 SN1 -x0xxx-Acc].
Product Details: Camper Top is an enclosure attached to the back of a Bimini, Sunshade, Convertible Top or Arch that has its own frame to cover to the back of the boat. Includes mounting hardware and Stainless Steel Snaps. When combined with Side-Curtains, the Camper-Top-Aft-Curtains fully enclose the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Snaps NOT installed in canvas, Snap Tool required. The Aft-Curtain has 25 to 60 standard 3/8-inch snaps or bungee cords, depending on the boat. Factory Original-Equipment (OEM) canvas made-to-order. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes. Also called: Boston Whaler "Sun-Top" or Grady White "Vista Top".
Baja® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Baja® canvas are size #8 (6 teeth/inch). Baja® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Baja® boats over 2 years old. Baja® Hull Identification Number (HIN) = AGCsssssmbyy (before June 2008) or BJAsssssmbyy (after June 2008) , where [yy] = model year.
Factory OEM part numbers: OEM tags p/n [06BA405 SN1 -x0xxx-Acc].
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White OEM tags p/n [06BA405 SN1 -x0xxx-Acc]. (the White tags are approx. 2-3 inches x 4-5 inches),
The OEM® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2006 Baja® 405 Performance No Arch: 405 Performance WithOUT Radar Arch.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with OEM tags p/n [06BA405 SN1 -x0xxx-Acc]. ("cc" is the color code).
ONLY zips to Factory OEM Camper Top and Side Curtains (no tincluded).
Verify that your old and mating canvas has GOEM on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Will NOT fit after-market top canvas.
Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
Includes Mounting Track or Zipper and Snap-Stud-Screws.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing OEM canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Credit Card Fees: RnR-Marine is paying the non-refundable 3% Credit Card Fee for you.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Baja Camper-Top-Aft-Curtain-OEM-G3.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.