Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2008 digitized patterns approved by Rinker® for the 296 Captiva Cuddy Arch: Captiva 296 Cuddy (Not the Bowrider) with factory installed, forward facing Radar Arch, I/O sterndrive:
Notes:
2007-2008 Rinker® 296 Captiva Cuddy Arch Model Specific Details: We MUST have the P/N from your existing canvas or cover for the 2007-2008 Rinker 296 Captiva Cuddy. Rinker® originally offered the 2007-2008 296 Captiva Cuddy Arch in Black, Royal Blue Tweed, Captain Navy, Linen Tweed, Sunflower Yellow or Dubonnet Tweed Sunbrella® (White Stamoid® is also available) fabric.
Product Details: Aft portion of the Camper-Top canvas which is an enclosure attached to the back of a Forward Bimini, Convertible Top or Arch that has its own frame. When combined with Curtains, the Camper-Top fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Stainless steel Canvas-Snaps are included (If used) but not installed in the canvas. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Rinker® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008} Rinker® 296 Captiva Cuddy Arch: Captiva 296 Cuddy (Not the Bowrider) with factory installed, forward facing Radar Arch, I/O sterndrive.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [10xxxxccc] ("ccc" is the color code).
ONLY zips to Factory OEM Camper Top and Side-Curtains.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool Will be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Rinker Camper-Top-Aft-Curtain-OEM-T5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews