Purchase Camper Side-Curtains (Factory OEM) part number [102xxxccc - S-RK 410/420] for 2007-2007 Rinker® 420 Express Cruiser Canvas Tops 420EC Express Cruiser (420 Fiesta Vee) with factory installed Radar Arch with Canvas Tops (NOT the Hard-Top)
Camper-Top-Side-Curtains-OEM-T for 2007-2007 420 Express Cruiser Canvas Tops
Rinker, 420 Express Cruiser Canvas Tops, 2007, Bimini Top, Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, close up, Starboard side.
Rinker, 420 Express Cruiser Canvas Tops, 2007, Bimini Top, Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Port side.
Rinker® 420 Express Cruiser Canvas Tops shown with Camper-Top-Side-Curtains-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Camper SIDE CURTAINS (Port and Starboard sides) with Eisenglass window(s) zip to OEM Camper Top and Aft Curtains (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2007 digitized patterns approved by Rinker® for the 420 Express Cruiser Canvas Tops: 420EC Express Cruiser (420 Fiesta Vee) with factory installed Radar Arch with Canvas Tops (NOT the Hard-Top):
Notes:
2007-2007 Rinker® 420 Express Cruiser Canvas Tops Model Specific Details: We MUST have the P/N from your existing canvas or cover for the 2007 Rinker 420 Exprees Cruiser with Canvas Top. Rinker® originally offered the 2007-2007 420 Express Cruiser Canvas Tops in Black, Sunbrella® with Pearlescent (white) Aqualon® Connection Strips (ALL Pearlescent (white) Aqualon® is also available with Eisenglass Windows only) fabric.
Product Details: Pair of Camper-Side-Curtains ONLY (NO Bimini-Top, Bimini-Curtains, Camper-Top, Aft-Curtains or Camper-Frame) zip to sides of OEM aft Camper-Top (NOT included) and to Camper-Aft-Curtain (NOT included) at rear of boat (sometimes the front on Bow-Riders or Deck Boats). Snaps (included, but not installed) to boat gunwales at bottom. When combined with Camper-Top (NOT included), Camper-Frame and Camper-Aft-Curtains (NOT included), the combined Camper-Top enclosure fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Factory Original-Equipment (OEM) canvas made-to-order and shipped from Ameritex® .
Rinker® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2007 Rinker® 420 Express Cruiser Canvas Tops: 420EC Express Cruiser (420 Fiesta Vee) with factory installed Radar Arch with Canvas Tops (NOT the Hard-Top).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [102xxxccc - S-RK 410/420] ("ccc" is the color code).
ONLY zips to Factory OEM Camper-Top and Aft-Curtain.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews