Purchase Cockpit Cover Bimini Camper Cutouts (Factory OEM) part number [0ySR260 DA SA1 -xTxxx-fcc] for 2007-2008 Sea Ray® 260 Sundancer Arch Soft Top 260DA Sundancer (International 275) With Optional RIGID, NON-FOLDING 'SOFT TOP' (Laces on factory installed Aluminum Tower Frame, NOT the Standard, Folding Bimini Top that attaches to a Fiberglass Arch/Spoiler)
Factory Snap-On COCKPIT-COVER with Cutouts (openings) for Bimini-Top AND Camper-Top Frames, Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2008 digitized patterns approved by Sea Ray® for the 260 Sundancer Arch Soft Top: 260DA Sundancer (International 275) With Optional RIGID, NON-FOLDING 'SOFT TOP' (Laces on factory installed Aluminum Tower Frame, NOT the Standard, Folding Bimini Top that attaches to a Fiberglass Arch/Spoiler):
Notes:
2007-2008 Sea Ray® 260 Sundancer Arch Soft Top Model Specific Details: PHOTOS OF YOUR BOAT REQUIRED (reply to order confirmation email). Bimini top frames are Aluminum. Camper top and sunshade top is stainless steel. The 'Soft Top' option had a bigger forward Bimini (also called Forward Sunshade), more vertical Front Visor, small rear Sunshade and optional Camper. The Cockpit Cover goes OVER the windshield in 2007 and to the Top (Not Over) in 2008. There was no 2009 260DA. Sea Ray® originally offered the 2007-2008 260 Sundancer Arch Soft Top in Black, Captain Navy (2007, 2008 hulls 1001-1051), Marine Midnight (2008 hulls 1052-up) Sunbrella® OR contact us for White Stamoid® (the Tops were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
Product Details: Snaps tightly over the Cockpit area and has Velcro-Lined Cutouts to go around the Bimini-Top AND Camper-Top frames (not included). Comes with one or two (depending on size) Adjustable Aluminum Support Pole(s) with Snap or Grommet (hole) through reinforced area in center of Cockpit-Cover. Cockpit-Cover has 30 to 80 standard 3/8" snaps, depending on the boat. Includes Male Snap-Stud-Screws. Factory Original-Equipment (OEM) cover made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: GLBT tags p/n [0ySR260 DA SA1 -xTxxx-fcc], Sea Ray® p/n [18xxxxx] or [19xxxxx]
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008} Sea Ray® 260 Sundancer Arch Soft Top: 260DA Sundancer (International 275) With Optional RIGID, NON-FOLDING 'SOFT TOP' (Laces on factory installed Aluminum Tower Frame, NOT the Standard, Folding Bimini Top that attaches to a Fiberglass Arch/Spoiler).
Only fits Factory-Original Windshield, Arch/Tower (if so equipped), Bimini-Top and Camper-Top setups.
Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
Cut-outs for Bimini-Top-Frame and Camper-Top-Frame are made per Factory-Original specifications.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Cockpit-Cover-Bimini-Camper-Cutouts-OEM-G4 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.