Purchase
Cockpit Cover Bimini Cutouts (Factory OEM)
part number [9yRE292 JM SA1-x0xxx-fcc]
for 1998-1999 Regal®
Commodore 292 with factory installed, Aft Facing Radar Arch

Regal® Commodore 292 Cockpit-Cover-Bimini-Cutouts-OEM-G2.5™ Factory Snap-On COCKPIT COVER with Cutouts (openings) for Bimini-Top (the Bimini-Top stands above the windshield) Frame (only), Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer)
Regal, Commodore 292, 1998, Bimini Top frame, Cockpit Cover, Port Rear.		 Regal® Commodore 292 Cockpit-Cover-Bimini-Cutouts-OEM-G2.5™ Factory Snap-On COCKPIT COVER with Cutouts (openings) for Bimini-Top (the Bimini-Top stands above the windshield) Frame (only), Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer)
Regal, Commodore 292, 1998, Cockpit Cover, Starboard Front.
Regal® Commodore 292 shown with Cockpit-Cover-Bimini-Cutouts-OEM-G2.5
(additional canvas pieces or covers may also be shown above, click images to enlarge)

 American Boat Canvas™, Inc."s ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 1998-1999 Regal Commodore 292...
• Everything we have for Regal 292 boats... and we have Cockpit-Cover-Bimini-Cutouts for these other boats...
Factory Snap-On COCKPIT COVER with Cutouts (openings) for Bimini-Top (the Bimini-Top stands above the windshield) Frame (only), Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1998-1999 digitized patterns approved by Regal® for the Commodore 292 with factory installed, Aft Facing Radar Arch:
  • Notes: Regal logo
    • 1998-1999 Regal® Commodore 292 Model Specific Details: The Cockpit Cover has cutouts for the Bimini-Top frame to pass through. Regal® originally offered the 1998-1999 Commodore 292 in Captain Navy, Forest Green, Taupe and Burgundy Sunbrella® OR contact us for Pearlescent (white) Aqualon® (Tops/Valances were originally SeaMark® vinyl-lined Sunbrella®, but now they are Sunbrella® to avoid mold issues) fabric.
    • Product Details: Snaps tightly over the Cockpit area and has Velcro-Lined Cutouts to go around the Bimini-Top frame (not included). Comes with one or two (depending on size) Adjustable Aluminum Support Pole(s) with Snap or Grommet through reinforced area in center of Cockpit-Cover. Cockpit-Cover has 30 to 80 standard 3/8" snaps, depending on the boat. Includes Male Snap-Stud-Screws. Factory Original-Equipment (OEM) cover made-to-order.
    • Regal® Factory Original Equipment Manufacturer (OEM) Notes: TAGSFor Ameritex® (Not Great Lakes) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Regal® canvas are size #8 (6 teeth/inch). Most (NOT All) Regal® Ameritex® and Taylor-Made® Bimini Tops have zippered frame (bow) pockets for easy installation. Regal® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Regal® boats over 2 years old. Regal® OEM canvas part number scheme: Ameritex® tags [xxxxxxccc], where the' xxxxxx' identifies the canvas piece and 'ccc' is the color code or Great Lakes tags [yyRExxx xAr-xxxxx-fcc], where 'yy' is the year and 'cc' is the color code. Regal® Hull Identification Number (HIN) = RGMsssssmbyy , where [yy] = model year.
    • Factory OEM canvas: GLBT tags p/n [9yRE292 JM SA1 -x0xxx-fcc], Regal® p/n [88xx] or [29xxx]

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {1998,1999} Regal® Commodore 292 with factory installed, Aft Facing Radar Arch.
    2. Does NOT fit around raised Convertible-Top (Convertible-Top connects to the top of the windshield) or Camper-Top (at rear) Frame.
    3. Only fits Factory-Original Windshield, Arch/Tower (if so equipped) and Bimini-Top Frame (the Bimini-Top stands above the windshield) setups.
    4. Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
    5. Cut-outs for Bimini-Top-Frame are made per Factory-Original specification.
    6. Sea Ray® is the ONLY boat mfgr that offers a choice in Cockpit-Cover Cutouts.
    7. Ships in a 42inch x 25inch x 7inch Box weighing approximately 38pounds.
    8. Check the 1998-1999 Regal® Commodore 292 Model-Specific-Information abovefor any other size/fit notes and zipper size.
    9. Does NOT fit Regal® Commodore 292 prior to 1998.
    10. Does NOT fit Regal® Commodore 292 after 1999.
    11. Does NOT fit any year/make/model other than the 1998-1999 Regal® Commodore 292.

  • Options:
  • 100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
    • Will fit your boat to the specs provided,
    • Will match your existing GLBT canvas,
    • Will perform as described when installed properly,
    • Will completely satisfy you with the quality and construction.
    You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.


  • Warranty: This product is covered by the Manufacturer's Warranty.

  • Installation:

  • Maintenance and Care: Canvas Care and Maintenance

  • Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
    ★★★★★
  • Lead-Time (Estimated): We no longer sell this product.

  • Your Boat: Regal Commodore 292 (1998-1999)
  • 12-digit HIN: (required)
    • Your 12-digit Hull-Identification-Number (HIN) (RGMsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
    • The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Cockpit Cover Bimini Cutouts (Factory OEM),
    • Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.
  • Material/Colors:
    1. Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),Sunbrella® Logo
    2. Select Fabric/Color: any Standard color (Prem. colors are extra) Sunbrella® marine fabric. Regal® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Regal® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Regal® for the 1998-1999 Regal® Commodore 292: Captain Navy, Forest Green, Taupe and Burgundy Sunbrella® OR contact us for Pearlescent (white) Aqualon® (Tops/Valances were originally SeaMark® vinyl-lined Sunbrella®, but now they are Sunbrella® to avoid mold issues),
    • or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

  • Price: $1,286.29
    We are not selling this online as of 2024

        + Shipping to

    This product is not available for purchase at this time...

    Please Email SeaRay@RNR-Marine.com
    to be notified when Cockpit-Cover-Bimini-Cutouts-OEM-G2.5
    is available for your Regal Commodore 292 (1998-1999).


  • Shipping Notes:
    • Signature required for delivery,
    • Can NOT ship to Post Office (PO) Box,
    • Can NOT change your address after order is placed,
    • Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
    • Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
    • Check shipment for damage upon receipt and file claim with shipper.

  • International Shipments:
    • We do NOT ship Regal Cockpit-Cover-Bimini-Cutouts-OEM-G2.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
    • Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
    • Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
 © 2021-2024, partner
Virginia, USA
Email InfoG@RNR-Marine.com
COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 3.145.163.58 US











$1,286.29

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Scroll down to
select options and purchase...





Made in USA

© 2021-2024, American Boat Canvas™, Inc.

Page: http://rnr-marine.com/Purchase.php?product=Cockpit-Cover-Bimini-Cutouts-OEM-G2.5&manufacturer=Regal&model=Commodore+292&yearfrom=1998&yearto=1999&partno=9yRE292%20JM%20SA1%20-x0xxx-fcc