Purchase
Cockpit Cover With Tower (Factory OEM)
part number [Bow Cover: 112108ccc]
for 2012-2016 Rinker® 220 MTX Cuddy Extreme Tower
220 MTXC Cuddy with factory installed Extreme(tm) Folding Wakeboard Tower, I/O sterndrive

Cockpit-Cover-With-Tower-OEM-T6™Factory Snap-On COCKPIT COVER with Adjustable Aluminum Support Pole(s) and reinforced Snap(s) for Pole alignment in Center of Cover on Larger Cockpit-Covers, OEM (Original Equipment Manufacturer)
Boat Canvas Identification, Bow Cover, Cockpit Cover.		 Cockpit-Cover-With-Tower-OEM-T6™Factory Snap-On COCKPIT COVER with Adjustable Aluminum Support Pole(s) and reinforced Snap(s) for Pole alignment in Center of Cover on Larger Cockpit-Covers, OEM (Original Equipment Manufacturer)
Typical Ameritex and TaylorMade Cockpit Cover with Support Pole, folded.
Images (random) of Cockpit-Cover-With-Tower-OEM-T6
(additional canvas pieces or covers may also be shown above, click images to enlarge)

 RNR-Marine, Inc. ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2012-2016 Rinker 220 MTX Cuddy Extreme Tower...
• Everything we have for Rinker 220 boats... and we have Cockpit-Cover-With-Tower for these other boats...
Factory Snap-On COCKPIT COVER with Adjustable Aluminum Support Pole(s) and reinforced Snap(s) for Pole alignment in Center of Cover on Larger Cockpit-Covers, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2012-2016 digitized patterns approved by Rinker® for the 220 MTX Cuddy Extreme Tower: 220 MTXC Cuddy with factory installed Extreme(tm) Folding Wakeboard Tower, I/O sterndrive:
  • Notes: Rinker logo
    • 2012-2016 Rinker® 220 MTX Cuddy Extreme Tower Model Specific Details: We did not have a Tower-Top canvas/frame/boot specifically for the 220 MTX. Rinker may have used the Tower-Top canvas/frame/boot from the 215 Captiva, but we do not know. We MUST have the P/N from your existing cover for the 2012-2016 Rinker 220 MTX Cuddy with extreme Towerr. Rinker® originally offered the 2012-2016 220 MTX Cuddy Extreme Tower in Black, Sunflower Yellow, Jockey Red or Dubonnet Tweed Sunbrella® fabric.
    • Product Details: Snaps tightly over Cockpit Area ONLY (not the Bow area) of boat. Cockpit-Cover has 30 to 80 standard 3/8" snaps, depending on the boat. Stainless steel Canvas-Snaps are included but not installed in the cover. Includes Male Snap-Stud-Screws. Premium (extra cost) Sunbrella colors are: Jockey Red, Yellow, Logo Red, Burgundy, and Orange.
    • Rinker® Factory Original Equipment Manufacturer (OEM) Notes: TAGSA laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
    • Factory OEM canvas: Covers: Ameritex® tags p/n [Bow Cover: 112108ccc] and [Extreme Tower Cockpit Cover: 114679ccc], Tower-Bimini: GLBT tags

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2012,2013,2014,2015,2016} Rinker® 220 MTX Cuddy Extreme Tower: 220 MTXC Cuddy with factory installed Extreme(tm) Folding Wakeboard Tower, I/O sterndrive.
    2. Only fits Factory-Original Windshield and FACTORY INSTALLED Wakeboard/Ski Arch/Tower.
    3. Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
    4. Made per Factory-Original specifications.
    5. Check the 2012-2016 Rinker® 220 MTX Cuddy Extreme Tower Model-Specific-Information abovefor any other size/fit notes and zipper size.
    6. Does NOT fit Rinker® 220 MTX Cuddy Extreme Tower prior to 2012.
    7. Does NOT fit Rinker® 220 MTX Cuddy Extreme Tower after 2016.
    8. Does NOT fit any year/make/model other than the 2012-2016 Rinker® 220 MTX Cuddy Extreme Tower.

  • Options:
  • Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
    • Will be of first rate quality and free of manufacturing defects,
    • Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
    • Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
    • Will perform as described when installed properly.
    You can count on all of the above or we will repair or replace the item in question.


  • Warranty: This product is covered by the Ameritex® 1 Year Manufacturer Warranty.

  • Installation:

  • Maintenance and Care: Canvas Care and Maintenance

  • Reviews: BBB® logoRNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
    ★★★★✬
  • Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.

  • Your Boat: Rinker 220 MTX Cuddy Extreme Tower (2012-2016)
  • 12-digit HIN: (required)
    • Your 12-digit Hull-Identification-Number (HIN) (RNKsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
    • The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Cockpit Cover With Tower (Factory OEM),
    • Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.
  • Material/Colors:
    1. Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),Sunbrella® Logo
    2. Select Fabric/Color: Per manufacturing agreements with Rinker®, OEM canvas for the 2012-2016 Rinker® 220 MTX Cuddy Extreme Tower is ONLY offered in these factory original (OEM) colors and fabric: Black, Sunflower Yellow, Jockey Red or Dubonnet Tweed Sunbrella®,
    • or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.


  • Please enter Ameritex® BLACK TAG P/N from YOUR Canvas : TAGS (required)

  • Please enter Ameritex® BLACK TAG DT date from YOUR Canvas (2010+) : (required)

  • Price: $2,188.40
          -  $   328.26 DISCOUNT
    (Spring Sale)
      = SALE PRICE: $1,860.14 USD
        + Shipping to

  • Shipping Notes:
    • Signature required for delivery,
    • Can NOT ship to Post Office (PO) Box,
    • Can NOT change your address after order is placed,
    • Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
    • Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
    • Check shipment for damage upon receipt and file claim with shipper.

  • International Shipments:
    • We do NOT ship Rinker Cockpit-Cover-With-Tower-OEM-T6 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
    • Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
    • Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
© 2003-2024, RNR-Marine, Inc.
636G Long Point Road
Mount Pleasant, SC 29464, USA
Email Sales@RNR-Marine.com
COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 3.143.168.172 US











$2,188.40
- $328.26 discount
(Spring Sale)
= $1,860.14 Sale Price

BBB® logoRNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
★★★★✬

Scroll down to
select options and purchase...





Made in USA

© 2003-2024, RNR-Marine™, Inc.

Page: http://rnr-marine.com/Purchase.php?product=Cockpit-Cover-With-Tower-OEM-T6&manufacturer=Rinker&model=220+MTX+Cuddy+Extreme+Tower&yearfrom=2012&yearto=2016&partno=Bow%20Cover:%20112108ccc