SKU# Flex-Dek_SeaRay300da02-07swim, (7)piece Flex-Dek™ 2002-2007 Sea Ray 300DA (335 International) Sundancer Swim Platform only. Popular, custom fit (existing pattern) non-slip, non-absorbent, low maintenance, cushioned foam flooring. Flex Dek™ is a UV and stain resistant, closed cell PE/EVA blended foam flooring with 3M® pressure sensitive adhesive backing, (peel and stick) specifically formulated for marine applications:
Notes: Custom fit foam flooring sets:
Durable, attractive alternative to Carpet,
Looks cool,
Low maintenance,
Anti-slip and shock absorbing,
Reduces fatigue while standing,
Reduces noise,
Non-absorbant, closed cell PE/EVA blended foam material similar to popular SeaDek®,
Flex Dek™ foam is solution dyed with UV stabilizers designed to withstand the tough marine environment without fading or degrading from extreme sun, salt and moisture,
Mold and stain resistant for easy care,
Optional lines fore and aft (2 or 4 inches apart) simulate teak boards, with an optional 1.5-inch perimeter border,
All Flex Dek™ sets are made-to-order and shipped from Custom Marine Carpet® in Michigan,
NO Sales Tax (except in South Carolina).
Size/Fit: Fits 2002-2003 Sea Ray® 335 Sundancer, This 7-piece Flex Dek(tm) set (http://RNR-Marine.com/images/Sea-Ray_300-Sundancer_2001-2007_Flex-Dek_Tan-and-Black-Teak-Look_on-Swim-Platform.jpg) is specifically patterned ONLY for a 2002-2007 Sea Ray 300DA (335 International) Sundancer Swim Platform. The Flex Dek(tm) set is designed to fit specific make/model/years of boat and will NOT fit other make/model/years combinations properly. Each Flex Dek(tm) set is precisely computer cut, trimmed to the specified pattern template which MAY BE SIMILAR (but not always the same) to the factory original equipment manufactured (OEM) carpet piece(s) that came with your boat. These Flex Dek(tm) sets are designed to stick on top of fiberglass liners (floors).
Installation: Flex Dek™ Installation:
Preparing the Surface where Flex Dek™ is to be applied:
Remove any loose paint, glues, etc. from the surface,
Remove all waxes and stains with the appropriate solvents or cleaners to assure best results,
Clean the surface thoroughly with a good water based cleaner,
Clean the surface with an Isopropyl Alcohol based cleaner,
Allow the surface to dry.
Installation:
Before you peel back the 3M™ adhesive backing paper, place the Flex Dek™ on the application surface (face up) to check for correct fit and to determine the exact location of the decking,
Turn the Flex Deck™ over so that the adhesive is face up,
Use a sharp knife to carefully cut the adhesive backing paper down the center at the shortest width, and be sure to completely cut throught the backing paper WITHOUT cutting the adhesive or foam,
Now, peel back and fold the four corners of the paper backing,
Turn the Flex Dek™ over and position it EXACTLY where you want it to be installed,
Using the masking tape, tape one side of the backing in position on the application surface. Taping prevents the Flex Dek™ from moving while installing,
Carefully lift up the side that is not taped down and pull up the folded corners to loosen the adhesive backing,
From the center working toward the outer edges, slowly peel the rest of the paper backing while applying the Flex Dek™. Apply firm, even pressure over the decking (you may use a roller to help with this process),
Do NOT pull or stretch the Flex Dek™.,
Remove the masking tape from the other side of the Flex Dek™,
From the center working toward the outer edges, slowly peel the last of the paper backing off while applying the Flex Dek™. Apply firm, even pressure over the decking,
Firmly press down (roll) on all surfaces and edges of the decking for uniform adhesion,
Full adhesion bond dwell time between deck and decking material takes 3 days to reach full cure. .
NORMAL CLEANUP: The best way to clean Flex Dek™ is with an mild all-purpose cleaner (or dish soap such as Dawn), warm water and a soft to medium stifflness (not too stiff) deck brush. Mix the cleaner with water and scrub gently. Rinse and repeat if necessary. For more stubborn stains, apply all-purpose cleaner (or dish soap) directly to the area and rinse.
TOUGH STAINS: To remove stains like fish blood, you may use diluted bleach (don't let it sit for a long period). Mix 1 cup of bleach with 1 gallon of warm water in a bucket (do NOT pour this on surface). Dip your deck brush in the bleach/water mix and use the bruch to scrub the stain in a circular motion. Rinse well and repeat if necessary.
Do NOT use full strength Bleach as a general cleaner - only use diluted bleach if the recommended cleaners (all-purpose cleaner or Dawn dish soap) do not work.
Do NOT use Hull Cleaner (Star-brite®, MaryKate® ON and Off™, West Marine® Instant Hull Cleaner™, etc.) since they are a strong acid which will ruin the Flex Dek™. RNR-Marine™ and Customer Marine Carpet, LLC are not liable for damage caused by cleaners or stains, such as blood.
Lead-Time (Estimated): Lead time est. (to ship) is 4-10 biz days weeks after order finalization as of 1/8/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Flex-Dek_SeaRay300da02-07swim Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
SKU# Flex-Dek_SeaRay300da02-07swim,
(7)piece Flex-Dek™ 2002-2007 Sea Ray 300DA (335 International) Sundancer Swim Platform only. Popular, custom fit (existing pattern) non-slip, non-absorbent, low maintenance, cushioned foam flooring. Flex Dek™ is a UV and stain resistant, closed cell PE/EVA blended foam flooring with 3M® pressure sensitive adhesive backing, (peel and stick) specifically formulated for marine applications: 
Marine grade 3M® pressure sensitive adhesive backing installed easily, 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews