Factory Aft Curtain CONNECTION (Zipper Strip for Track) with Keder Welt that slides into track on Hard-Top and zips to OEM Aft-Curtain (not included), White Mustang(r) (was Aqualon(tm), which is no longer available) fabric, OEM (Original Equipment Manufacturer) in Aqualon™ fabric, produced with the same high quality, original 2005-2010 digitized patterns approved by Chris Craft® for the Roamer 40 Hard-Top:
Notes:
2005-2010 Chris Craft® Roamer 40 Model Specific Details: The Aft Curtain goes to the transom and has a window. Chris Craft® originally offered the 2005-2010 Roamer 40 in Pearlescent (white) Aqualon® OR Cadet Grey Sunbrella® fabric.
Product Details: Mounts under Rear of Hard-Top with Plastic or Aluminum Tracks . Has Zipper for Aft-Curtain, and is required to connect the Aft-Curtain to the Hard-Top.
Chris Craft® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Per Chris Craft®, we can NOT sell factory OEM Canvas and Covers direct for Chris Craft® boats less than 8 years old (we can sell 2016 and earlier in 2024 for example). Zippers on OEM Chris Craft® canvas are size #8 (6 teeth/inch). MSome (NOT All) Boot-Covers have Chris Craft® logo. Most (NOT All) Chris Craft® Tops have zippered frame (bow) pockets for easy installation. Chris Craft® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). OEM canvas part number scheme: [xxx] identifies the canvas piece and [ccc] is the color code. HIN = CCxsssssmbyy , where [yy] = model year.
Factory OEM canvas: Ameritex® tags p/n [104xxxccc] or [107xxxccc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [104xxxccc] or [107xxxccc] (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2005,2006,2007,2008,2009,2010} Chris Craft® Roamer 40 Hard-Top.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [104xxxccc] or [107xxxccc] ("ccc" is the color code).
Fits Factory Original-Equipment (OEM) Hard-Top and Aft-Curtains (or Aft-Drop-Curtains) perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Chris Craft Hard-Top-Aft-Curtain-Connection-Aqualon-OEM-T3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Per Chris Craft®, we can NOT sell factory OEM Canvas and Covers direct for Chris Craft® boats less than 8 years old (we can sell 2016 and earlier in 2024 for example). Zippers on OEM Chris Craft® canvas are size #8 (6 teeth/inch). MSome (NOT All) Boot-Covers have Chris Craft® logo. Most (NOT All) Chris Craft® Tops have zippered frame (bow) pockets for easy installation. Chris Craft® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews