Purchase Hard Top Aft-Drop-Curtain Connection, Aqualon™ fabric (Factory OEM) part number [110xxxccc - S-TB 45HT] for 2009-2011 Formula® F-45 Yacht with factory installed Hard-Top
Formula, 45, 2010, Hard Top Aft Curtain, Aft Inserts, Starboard Rear.
Formula, 45, 2010, Hard Top Aft Curtain, Starboard Rear.
Formula® 45 shown with Hard-Top-Aft-Drop-Curtain-Connection-Aqualon-OEM-T3 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Drop Curtain CONNECTION (Zipper Strip for Track) with Keder Welt that slides into track on Hard-Top and zips to OEM Aft Drop Curtain to floor (not included), White Mustang(r) (was Aqualon(tm), which is no longer available) fabric, OEM (Original Equipment Manufacturer) in Aqualon™ fabric, produced with the same high quality, original 2009-2011 digitized patterns approved by Formula® for the F-45 Yacht with factory installed Hard-Top:
Notes:
2009-2011 Formula® 45 Model Specific Details: The 45 Yacht is offered with two aft curtain configuration choices: 1) Angled HARD-TOP AFT CURTAIN which slopes to the transom (with upside down U-Shaped zippered screen window in the middle section), AND 2) Vertical HARD-TOP AFT-DROP Curtain. The Hard-Top Inserts are the 2 small triangular pieces where the Arch meets the Hard-Top in back. Formula® originally offered the 2009-2011 45 in Black, Sapphire Blue (no longer offered, closest is Mediterranean Blue Tweed), Cadet Grey or Linen Sunbrella® OR Pearlescent (white) Aqualon® fabric.
Product Details: Mounts under Rear of Hard-Top with Plastic or Aluminum Tracks . Has Zipper for Aft-Drop-Curtain (to Floor), and is required to connect the Aft-Drop-Curtain to the Hard-Top.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
#8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
#10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year
(it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
. Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
Factory OEM canvas: Ameritex® tags p/n [110xxxccc - S-TB 45HT] boats built after March 2011 used the 2012 canvas
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [110xxxccc - S-TB 45HT] boats built after March 2011 used the 2012 canvas (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2009,2010,2011} Formula® F-45 Yacht with factory installed Hard-Top.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [110xxxccc - S-TB 45HT] boats built after March 2011 used the 2012 canvas ("ccc" is the color code).
Fits Factory Original-Equipment (OEM) Hard-Top and Aft-Drop-Curtains perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 2.5-4.5 week Lead-Time est. after order finalization as of 3/16/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Formula Hard-Top-Aft-Drop-Curtain-Connection-Aqualon-OEM-T3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size: 
