Purchase Hard Top Aft-Drop-Curtain (Factory OEM) part number [1xxxxxccc] for 2008-current SeaSwirl® Striper 2301WA Alaska 2301WA ALASKA package with factory installed Fiberglass Top, Fully Enclosed Hard-Glass Windshield and Sides, Rocket Launchers, Spreader Light, Defroster and Starboard Windshield Wiper
Hydrasports, 2800WA, 2004, Factory OEM Hard Top, Spray Shield, Side Curtains, Aft Drop Curtain, Port Rear.
Image (random) of Hard-Top-Aft-Drop-Curtain-OEM-T3 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory AFT DROP CURTAIN to floor with Eisenglass window(s) and Zipper Access for boat with Factory Hard-Top, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2008-2024 digitized patterns approved by SeaSwirl® for the Striper 2301WA Alaska: 2301WA ALASKA package with factory installed Fiberglass Top, Fully Enclosed Hard-Glass Windshield and Sides, Rocket Launchers, Spreader Light, Defroster and Starboard Windshield Wiper:
Notes:
2008-current SeaSwirl® Striper 2301WA Alaska Model Specific Details: We did not make the OEM canvas for the 2101WA Alaskan until 2008. The 2008 canvas MAY fit, but check for design changes, and you must replace the Frame on Bimini setups. SeaSwirl® originally offered the 2008-current Striper 2301WA Alaska in Black or Captain Navy Sunbrella® fabric.
Product Details: Mounts under Rear of Hard-Top with Plastic or Aluminum Tracks (included as needed) and SS Snap-Stud-Screws. Extends vertically down to floor. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Stainless steel Canvas-Snaps are included (IF used) but not installed in the canvas, for perfect alignment. Let us know if you need Clip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
SeaSwirl® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM SeaSwirl® canvas are size #8 (6 teeth/inch). Since SeaSwirl® made few changes to their boats over the years, this canvas MAY fit earlier models, especially Striper Hard-Top boats. This canvas will NOT fit earlier model bimini top frames, which were made by another manufacturer, but you can replace the bimini frame and canvas for a good fit on earlier models. Most (NOT All) SeaSwirl® Bimini Tops have zippered frame (bow) pockets for easy installation. SeaSwirl® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for SeaSwirl® boats over 2 years old. SeaSwirl® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is color code. SeaSwirl® Hull Identification Number (HIN) = BRCsssssmbyy (1972-2001), GSSsssssmbyy (2001-2010) or IJSsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} SeaSwirl® Striper 2301WA Alaska: 2301WA ALASKA package with factory installed Fiberglass Top, Fully Enclosed Hard-Glass Windshield and Sides, Rocket Launchers, Spreader Light, Defroster and Starboard Windshield Wiper.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1xxxxxccc] ("ccc" is the color code).
Fits Factory Original-Equipment (OEM) Hard-Top and Side-Curtains perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Will NOT fit after-market top or canvas.
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship SeaSwirl Hard-Top-Aft-Drop-Curtain-OEM-T3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.