Purchase
Hard Top Connector (Factory OEM)
part number [1xxxxxccc - SS 290 WA HT ]
for 2016-current SeaSwirl® Striper 290WA
290WA Hard-Top

Hard-Top-Connector-OEM-T2™Factory Hard-Top CONNECTOR front Eisenglass Window Set (also called Windscreen: 1 or 2 front panels) for Factory Hard-Top, typically with zippers on side for Hard Top Side Curtains (not included) OEM (Original Equipment Manufacturer)

Hydrasports, 2800WA, 2004, Factory OEM Hard Top, Spray Shield, Side Curtains, Aft Drop Curtain, Port Front.

Boat Canvas Identification, Ameritex.

Images (random) of Hard-Top-Connector-OEM-T2
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2016-2024 SeaSwirl Striper 290WA...
• Everything we have for SeaSwirl 290 boats... and we have Hard-Top-Connector for these other boats...

Factory Hard-Top CONNECTOR front Eisenglass Window Set (also called Windscreen: 1 or 2 front panels) for Factory Hard-Top, typically with zippers on side for Hard Top Side Curtains (not included) OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2016-2024 digitized patterns approved by SeaSwirl® for the Striper 290WA: 290WA Hard-Top:

Notes: Flexible Glass fits between Hard-Top and Windshield or Console (typically with Zip-Open Windows) Also called "Windshield", "Spray-Shield" or "Visor". Mounts under Front of Hard-Top with Plastic or Aluminum Tracks and SS Snap-Stud-Screws, Clip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
- Factory OEM canvas: Ameritex® tags p/n [1xxxxxccc - SS 290 WA HT ]
- TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
  1. White Ameritex® tags p/n [1xxxxxccc - SS 290 WA HT ] (the tags are approx. 2-3 inches x 4-5 inches),
  2. The Ameritex® logo embossed on the heads of the stainless canvas snaps,
  3. The Zipper Size listed above (#8 in most cases) on all zippers.
- Other Factory OEM canvas, frames and covers for the 2016-2024 SeaSwirl Striper 290WA are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2016,2017,2018,2019,2020,2021,2022,2023,2024} SeaSwirl® Striper 290WA: 290WA Hard-Top.
2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1xxxxxccc - SS 290 WA HT ] ("ccc" is the color code).
3. Fits Factory installed Original-Equipment (OEM) Hard-Top and OEM Side-Curtains perfectly.
4. Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
5. Will NOT fit after-market top or canvas.
6. Mounts to front of Hard-Top via Hard-Top-Connection (Zipper Strip) or directly with Keder Welt which slides into Plastic or Aluminum Tracks.
7. Attaches to windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
8. Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
9. Check the 2016-2024 SeaSwirl® Striper 290WA Model-Specific-Information abovefor any other size/fit notes and zipper size.
10. Does NOT fit SeaSwirl® Striper 290WA prior to 2016.
11. Does NOT fit any year/make/model other than the 2016-2024 SeaSwirl® Striper 290WA.
Options:
- Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by SeaSwirl® from 2016 to 2024 for the SeaSwirl Striper 290WA
- White Flex-A-Rail™ Track,
- Canvas Snap Installation Tool,
- Time Saver™ Snap Installation Vice-Grip Attachment (T4-79B Button Anvil and T4-82A Button Clincher) jaw insert set, available online at Freeport
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
- Will be of first rate quality and free of manufacturing defects,
- Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
- Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
- Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Warranty: This product is covered by the Ameritex® 1 Year Manufacturer Warranty.
Installation:
- Canvas and Snap Installation Instructions,
- Installing Male Snap Stud Screws in Fiberglass
Maintenance and Care: Canvas and Eisenglass Care and Maintenance
Reviews: RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
★★★★✬

Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.

Your Boat: SeaSwirl Striper 290WA (2016-current)

12-digit HIN: (required)

Your 12-digit Hull-Identification-Number (HIN) (mmmsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Hard Top Connector (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

Material/Colors:

Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: Per manufacturing agreements with SeaSwirl®, OEM canvas for the 2016-2024 SeaSwirl® Striper 290WA is ONLY offered in these factory original (OEM) colors and fabric: Black or Captain Navy Sunbrella®, with 30ga clear vinyl(r) window material

or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

Please enter Ameritex® BLACK TAG P/N from YOUR Canvas : TAGS

(required)

Please enter Ameritex® BLACK TAG DT date from YOUR Canvas (2010+) : (required)

Price: $886.07

Unfortunately, we can no longer sell canvas or covers for SeaSwirl boats older than 2009.

+ Shipping to

This product is not available for purchase at this time...

Shipping Notes:
- Signature required for delivery,
- Can NOT ship to Post Office (PO) Box,
- Can NOT change your address after order is placed,
- Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
- Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
- Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
- We do NOT ship SeaSwirl Hard-Top-Connector-OEM-T2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
- Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
- Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 13.59.136.170 US

$886.07

Unfortunately, we can no longer sell canvas or covers for SeaSwirl boats older than 2009.

RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews

★★★★✬

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Hard-Top-Connector-OEM-T2&manufacturer=SeaSwirl&model=Striper+290WA&yearfrom=2016&yearto=current&partno=1xxxxxccc%20-%20SS%20290%20WA%20HT%20

Purchase Hard Top Connector (Factory OEM) part number [1xxxxxccc - SS 290 WA HT ] for 2016-current SeaSwirl® Striper 290WA 290WA Hard-Top

Purchase
Hard Top Connector (Factory OEM)
part number [1xxxxxccc - SS 290 WA HT ]
for 2016-current SeaSwirl® Striper 290WA
290WA Hard-Top