Purchase Hard Top Connector PolyCarbonate (Factory OEM) part number [113xxxccc - RK 310 HT] for 2012-2016 Rinker® 310 Express Cruiser Hard-Top 310EC Express Cruiser (310 Fiesta Vee) with factory installed, forward facing Radar Arch with full Hard-Top Fore and Aft (No aft Soft Camper Top)
Rinker, 310 Express Cruiser Hard Top, 2013, Hard Top Front Connector, Side Curtains, Hard Top Aft Side Curtains and Aft Curtain, Black Sunbrella, Port side.
Rinker, 310 Express Cruiser Hard Top, 2015, Hard Top Front Connector, Side Curtains, Aft Inserts, inside.
Rinker® 310 Express Cruiser Hard-Top shown with Hard-Top-Connector-PolyCarbonate-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Hard-Top CONNECTOR front stiff Polycarbonate Window Set (also called Windscreen: 1, 2 or 3 front panels) for Factory Hard-Top, typically with zippers on side for Hard Top Side Curtains (not included) OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2012-2016 digitized patterns approved by Rinker® for the 310 Express Cruiser Hard-Top: 310EC Express Cruiser (310 Fiesta Vee) with factory installed, forward facing Radar Arch with full Hard-Top Fore and Aft (No aft Soft Camper Top):
Notes:
2012-2016 Rinker® 310 Express Cruiser Hard-Top Model Specific Details: #8 (6 teeth/inch) zippers. The Front Connector and Front Side Curtains are stiff Lexan® polycarbonate material, and snap to the top of the windshield. The Aft Curtain has an upside down U-Shaped zippered window with screen in it, and a zippered door on the starboard side above the transom door. If you have missing or illegible tags on your canvas or cover, we have prior sales of 2016 Rinker 310 Express Cruiser Hard-Tops, so please EMAIL us to see if we can still make this canvas. Rinker® originally offered the 2012-2016 310 Express Cruiser Hard-Top in Black Sunbrella® OR Contact us for White Stamoid® fabric.
Product Details: Hard Glass fits between front of Hard-Top and Windshield (center section typically zips open). Also called "Windshield" or "Visor". Mounts to Front of Hard-Top with Plastic or Aluminum Tracks and Stainless Steel Snaps, which are included but not installed in the canvas. Typically 3 separate panels which zip together, but 1 or 2 panels on some boats. Let us know if you needClip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
Rinker® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2012,2013,2014,2015,2016} Rinker® 310 Express Cruiser Hard-Top: 310EC Express Cruiser (310 Fiesta Vee) with factory installed, forward facing Radar Arch with full Hard-Top Fore and Aft (No aft Soft Camper Top).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [113xxxccc - RK 310 HT] and [1142xxccc - RK 310 HT] ("ccc" is the color code).
Fits Factory Original-Equipment (OEM) Hard-Top, Windshield and OEM Side-Curtains perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Will NOT fit after-market top or canvas.
Mounts to front of Hard-TOp via Arch-Connection-Strip (Zipper Strip) or directly with Keder Welt which slides into Plastic or Aluminum Tracks.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews