Purchase Hard Top Connector Screen Insert (Factory OEM) part number [109xxxccc] for 2006-2009 Larson® Cabrio 350 Mid-Cabin Hard-Top
Larson, Cabrio 350, 2007, Hard Top, Front Connector, Side Curtain, Port side.
Larson, Cabrio 350, 2008, Hard Top, Front Connector, Side Curtain, Camper Top, Camper Side and Aft Curtains, Starboard side.
Larson® Cabrio 350 shown with Hard-Top-Connector-Screen-Insert-OEM-T3 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory front SCREEN INSERTS for OEM Front Eisenglass Hard-Top-Connector (also called Windscreen, no t included) between factory Hard-Top and Windshield, OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2006-2009 digitized patterns approved by Larson® for the Cabrio 350 Mid-Cabin Hard-Top:
Notes:
2006-2009 Larson® Cabrio 350 Model Specific Details: We did NOT make the AFT Curtain that attaches directly to the back of the arch (no frame). We did NOT make the Camper Top Frame (we did make the Camper Top, Side and Aft Curtain canvas) for this boat. These are available only through Larson. If you have missing or illegible tags on your canvas or cover, we have prior sales of 2008 Larson 350 Cabrios to go by, so just enter 123456789 for the P/N and make up a DT date code between 2011 and 2019. Larson® originally offered the 2006-2009 Cabrio 350 in Black, Captain Navy, Linen Tweed or Jockey Red Sunbrella® fabric.
Product Details: Screen-Insert Zips into Hard-Top-Connector to allow air flow and keep bugs out
Larson® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Larson® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Larson® Hull Identification Number (HIN) = LARsssssmbyy (1972-2010) or IJLsssssmbyy (2010-current) , where [yy] = model year.
Factory OEM canvas: Ameritex® tags p/n [109xxxccc] or [110xxxccc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags p/n [109xxxccc] or [110xxxccc] (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007,2008,2009} Larson® Cabrio 350 Mid-Cabin Hard-Top.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [109xxxccc] or [110xxxccc] ("ccc" is the color code).
Only fits Factory OEM Hard-Top Connector.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Larson Hard-Top-Connector-Screen-Insert-OEM-T3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews