Purchase
Hard Top Visor and Valance (Factory OEM)
part number [1ySR330 DAtHAr-xxxxx-fcc]
for 2011-2012 Sea Ray® 330 Sundancer
330DA and 330SDA Sundancer (355 International) with factory installed, forward facing Hard Top (Radar Arch)

Sea Ray® 330 Sundancer Hard-Top-Visor-and-Valance-OEM-G6™ Factory Hard-Top Front VISOR and VALANCE (Zipper Strip for Track) front window set (1, 2 or 3 front panels) connects to front of factory Hard Top, OEM (Original Equipment Manufacturer)
Sea Ray, 330 Sundancer, 2012, Hard Top, Visor, Side Curtains, Sunshade Top, Sunshade Enclosure Curtains, Starboard Front.
Sea Ray® 330 Sundancer Hard-Top-Visor-and-Valance-OEM-G6™ Factory Hard-Top Front VISOR and VALANCE (Zipper Strip for Track) front window set (1, 2 or 3 front panels) connects to front of factory Hard Top, OEM (Original Equipment Manufacturer)
Sea Ray, 330 Sundancer, 2011, Hard Top Visor, Side Curtains, Sunshade Top, Sunshade Enclosure Curtains, Port Rear.
Sea Ray® 330 Sundancer shown with Hard-Top-Visor-and-Valance-OEM-G6
(additional canvas pieces or covers may also be shown above, click images to enlarge)


American Boat Canvas™, Inc."s ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2011-2012 Sea Ray 330 Sundancer...
• Everything we have for Sea Ray 330 boats... and we have Hard-Top-Visor-and-Valance for these other boats...
Factory Hard-Top Front VISOR and VALANCE (Zipper Strip for Track) front window set (1, 2 or 3 front panels) connects to front of factory Hard Top, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2011-2012 digitized patterns approved by Sea Ray® for the 330 Sundancer: 330DA and 330SDA Sundancer (355 International) with factory installed, forward facing Hard Top (Radar Arch):
  • Notes:
    • 2011-2012 Sea Ray® 330 Sundancer Model Specific Details: Stainless Steel frames. The Cockpit Cover goes to the TOP of (Not over) the windshield. The Aft Sunshade slid directly into the track on the back of the Radar Arch (No Sunshade Valance strip used). No Aft Stand-Up Camper Top or Camper Curtains were offered by Sea Ray®.
    • Product Details: Flexible Eisenglass fits between Hard-Top and Windshield (typically 3 pieces with Zip-Open Windows). Also called "Windshield Connector" or "Spray-Shield". Includes Valance canvas strip which Zips onto the Visor and Slides into Track(s) on the Hard-Top and either snaps onto or slides into a track at the top of the windshield. . Factory Original-Equipment (OEM) canvas made-to-order and shipped from GLBT® .
    • Factory OEM canvas: Great Lakes® tags p/n [1ySR330 DAtHAr-xxxxx-fcc], Sea Ray® p/n [19xxxxx]
    • TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
      1. White Great Lakes® tags p/n [1ySR330 DAtHAr-xxxxx-fcc], Sea Ray® p/n [19xxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
      2. The Great Lakes®  logo embossed on the heads of the stainless canvas snaps,
      3. The Zipper Size listed above (#8 in most cases) on all zippers.

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2011,2012} Sea Ray® 330 Sundancer: 330DA and 330SDA Sundancer (355 International) with factory installed, forward facing Hard Top (Radar Arch).
    2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with Great Lakes® tags p/n [1ySR330 DAtHAr-xxxxx-fcc], Sea Ray® p/n [19xxxxx] ("cc" is the color code).
    3. Fits OEM Hard-Top and Side-Curtains prefectly.
    4. Factory OEM #8 Zippers GLBT® Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
    5. Will NOT fit after-market top or canvas.
    6. Mounts under front of Hard-Top with Plastic or Aluminum Tracks (included as needed).
    7. Attaches to windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
    8. Snaps are included, but NOT installed in the canvas (to allow perfect alignment on install), so you will need a Snap Installation Tool for snaps (includes male snap-screw-studs OR windshield clip-on snaps if needed).
    9. Check the 2011-2012 Sea Ray® 330 Sundancer Model-Specific-Information abovefor any other size/fit notes and zipper size.
    10. Does NOT fit Sea Ray® 330 Sundancer prior to 2011.
    11. Does NOT fit Sea Ray® 330 Sundancer after 2012.
    12. Does NOT fit any year/make/model other than the 2011-2012 Sea Ray® 330 Sundancer.

  • Options:
  • 100% Guarantee: Made-to-order and shipped from Great Lakes Boat Top Co™ We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures:
    • Will fit your boat to the specs provided,
    • Will match your existing Great Lakes canvas,
    • Will perform as described when installed properly,
    • Will completely satisfy you with the quality and construction.
    You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory by American Boat Canvas™, Inc. and Great Lakes Boat Top® Co.


  • Warranty: This product is covered by the Manufacturer's Warranty.

  • Installation: Canvas and Snap Installation Instructions

  • Maintenance and Care: Canvas and Eisenglass Care and Maintenance

  • Reviews: rated 5.0 / 5.0 based on 2 American Boat Canvas™ customer reviews on Facebook®
    ★★★★★


  • Lead-Time (Estimated): Available in Late June or July 2022, Email ABC@RNR-Marine.com to be notified

  • Your Boat: Sea Ray 330 Sundancer (2011-2012)
  • 12-digit HIN: (required)
    • Your 12-digit Hull-Identification-Number (HIN) (SERxssssmyxx) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
    • The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Hard Top Visor and Valance (Factory OEM),
    • Based on the model (Sea Ray 330 Sundancer) and HIN you provide, we will verify:
      • the exact, correct revision of the Hard Top Visor and Valance (Factory OEM) pattern to use,
      • the correct fabric and the color(s) originally offered from the factory by Sea Ray® for the 2011-2012 Sea Ray 330 Sundancer,
    • Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.
  • IMPORTANT information required about your 2011-2012 Sea Ray 330 Sundancer:
    Windshield Frame Material ?
  • Material/Colors:
    1. Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),Sunbrella® Logo
    2. Select Fabric/Color: any Standard color (Prem. colors are extra) Sunbrella® marine fabric. Sea Ray® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Sea Ray® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Sea Ray® for the 2011-2012 Sea Ray® 330 Sundancer: Black and Marine Midnight Sunbrella® with SeaMark® (vinyl lined, waterproof Sunbrella) Tops or Email us for White Stamoid (dash covers were originally Cadet Grey), with 30mil clear vinyl window material
    • or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

  • Price: $2,113.86
    Sales SUSPENDED until Late JULY 2022 due to COVID

        + Shipping to

    This product is not available for purchase at this time...

    Please Email ABC@RNR-Marine.com
    to be notified when Hard-Top-Visor-and-Valance-OEM-G6
    is available for your Sea Ray 330 Sundancer (2011-2012).


  • Shipping Notes:
    • Signature required for delivery,
    • Can NOT ship to Post Office (PO) Box,
    • Can NOT change your address after order is placed,
    • Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
    • Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
    • Check shipment for damage upon receipt and file claim with shipper.

  • International Shipments:
    • We do NOT ship Sea Ray Hard-Top-Visor-and-Valance-OEM-G6 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
    • Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
    • Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
 © 2021-2022, American Boat Canvas™, Inc.
Box 7499
Arlington, VA, 22207 USA
800-947-7040
Email Info@AmericanBoatCanvas.com
COMPUTER CCBot/2.0 (https://commoncrawl.org/faq/) 18.232.59.38 US












$2,113.86

Sales SUSPENDED until Late JULY 2022 due to COVID

Please Email ABC@RNR-Marine.com
to be notified when Hard-Top-Visor-and-Valance-OEM-G6
is available for your Sea Ray 330 Sundancer (2011-2012).

 rated 5.0 / 5.0 based on 2 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Scroll down to
select options and purchase...







Made in USA

© 2021-2022, American Boat Canvas™, Inc.


Page: http://rnr-marine.com/Purchase.php?product=Hard-Top-Visor-and-Valance-OEM-G6&manufacturer=Sea+Ray&model=330+Sundancer&yearfrom=2011&yearto=2012&partno=1ySR330%20DAtHAr%20-xxxxx-fcc