Factory Camper CANVAS (no frame) with zippers for OEM Camper Side and Aft Curtains (not included), White Mustang(r) (was Pearlescent Mustang(r) (was Aqualon(tm), which is no longer available) fabric (Bimini and other curtains sold separately), OEM (Original Equipment Manufacturer) in Aqualon™ fabric, produced with the same high quality, original - digitized patterns approved by ® for the :
Notes: The Camper-Top is the single Top canvas piece at the back of the boat, mounted on a separate Camper-Top-Frame (sold separately) which attaches to the back of a Bimini-Top, Convertible-Top, Arch-Aft-Top or Arch (other tops sold separately). The Camper-Top combines with Curtains (sold separately) to fully enclose the back of the boat providing full, protected (standup) use of the rear cockpit area at the dock.
Included: Single Camper-Top-Canvas piece with Zippers on edges,
NOT Included: Frame, Curtains, Mtg. Hardware, Boot-Cover and other Bimini/Convertible/Arch-Tops and Frames are NOT included.
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White (the tags are approx. 2-3 inches x 4-5 inches),
The ® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Size/Fit: Pockets (some with zippers) to fit onto Factory OEM Camper-Top-Frame bows (frame not included). Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases). Attaches (typically zips) to the back of a Radar Arch, Bimini-Top, Convertible Top or Arch-Aft-Top (other tops not included). Has zippers along sides and back for Camper Side and Aft Curtains IF offered (not included).ONLY fits Factory Original-Equipment Camper-Top Frame, Sides and Aft Curtains.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews