Purchase Bimini Top Canvas NO Zippers (Factory OEM) part number [10xxxxccc] for 2006-2011 Larson® Senza 226 Tower Senza 226 bowrider with factory installed Wakeboard Tower (Adrenaline pkg)
Larson, Senza 226 Tower, 2009, Bimini Top, Starboard Front.
Larson® Senza 226 Tower shown with Bimini-Top-Canvas-NO-Zippers-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Bimini Top Replacement CANVAS (NO frame, sold separately) without Curtain Zippers, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2006-2011 digitized patterns approved by Larson® for the Senza 226 Tower: Senza 226 bowrider with factory installed Wakeboard Tower (Adrenaline pkg):
Notes:
2006-2011 Larson® Senza 226 Tower Model Specific Details: 2006-2011 Larson® Senza 226 bowrider with factory installed Wakeboard Tower (Adrenaline pkg). There are no enclosure curtains for the Low Profile windshield Senza 226. Larson® originally offered the 2006-2011 Senza 226 Tower in Black, Captain Navy, Mediterranean Blue Tweed, Pacific Blue (2010-2011), Dubonnet Tweed or Jockey Red Sunbrella® fabric. Part Numbers: 2006-2011 Larson® Senza 226 Tower factory OEM canvas, covers & frames have Ameritex® tags p/n [10xxxxccc].
Product Details: To replace worn, damaged or old Bimini-Top-Canvas. Canvas only. No Zippers or Boot. Frame not included.
Larson® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Larson® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Larson® Hull Identification Number (HIN) = LARsssssmbyy (1972-2010) or IJLsssssmbyy (2010-current) , where [yy] = model year.
Factory OEM part numbers: Ameritex® tags p/n [10xxxxccc].
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
Black Ameritex® tags p/n [10xxxxccc]. (the Black tags are approx. 1.5 inches x 3 inches, and we will require a photo),
White Ameritex® tags p/n [10xxxxccc]. (the White tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007,2008,2009,2010,2011} Larson® Senza 226 Tower: Senza 226 bowrider with factory installed Wakeboard Tower (Adrenaline pkg).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [10xxxxccc]. ("ccc" is the color code).
Only fits Factory Original-Equipment (OEM) Bimini Top Frame.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RnR-Marine™ is rated 4.4 / 5.0
based on 149
RnR-Marine™ Customer reviews
and 24
Better Business Bureau® reviews