Factory Bimini Replacement CANVAS (NO frame) with Zippers for OEM front Connector and Curtains (Not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2005-2007 digitized patterns approved by Larson® for the Senza 186 Outboard motor, No Tower:
Notes:
2005-2007 Larson® Senza 186 Outboard Model Specific Details: 2005-2007 Larson® Senza 186 Outboard motor, No Tower. Larson® originally offered the 2005-2007 Senza 186 Outboard in Black, Captain Navy, Mediterranean Blue, Pacific Blue (2010+), Beige, Dubonnet Tweed, Burgundy or Jockey Red Sunbrella® fabric. Part Numbers: 2005-2007 Larson® Senza 186 Outboard factory OEM canvas, covers & frames have Ameritex® tags p/n [10xxxxccc].
Product Details: Replaces worn, damaged or old Bimini-Top-Canvas. Canvas only with Zippers for Front Connector, Side-Curtains (and Aft-Drop-Curtain, Radar Arch or Arch Connection if so equipped). No Frame, Connector, Connection, Curtains, Boot or Valance included (sold separately). Factory Original-Equipment (OEM) canvas custom made-to-order in your specified color.
Larson® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Larson® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Larson® Hull Identification Number (HIN) = LARsssssmbyy (1972-2010) or IJLsssssmbyy (2010-current) , where [yy] = model year.
Factory OEM part numbers: Ameritex® tags p/n [10xxxxccc].
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
Black Ameritex® tags p/n [10xxxxccc]. (the Black tags are approx. 1.5 inches x 3 inches, and we will require a photo),
White Ameritex® tags p/n [10xxxxccc]. (the White tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2005,2006,2007} Larson® Senza 186 Outboard motor, No Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [10xxxxccc]. ("ccc" is the color code).
Pockets (some are zippered) to fit on Factory OEM Bimini-Top Frame.
Zips to front Connector and Side-Curtains (NOT included).
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Typically zips to factory Radar-Arch, Arch-Connection (zipper strip) or front of Camper-Top (no tincluded) at Rear (or may be stand-alone).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RnR-Marine™ is rated 4.4 / 5.0
based on 149
RnR-Marine™ Customer reviews
and 24
Better Business Bureau® reviews