Purchase Camper Top Canvas, SeaMark® fabric (Factory OEM) part number [1019xxccc] for 2003-2005 Larson® Cabrio 310 Mid-Cabin with factory installed, Aft Facing Radar Arch and [1019xxccc] tags
Camper-Top-Canvas-Seamark-OEM-T1.5 for 2003-2005 Cabrio 310
Larson, Cabrio 310, 2005, Bimini, Bimini Connector, Side Curtains, Camper Top, Camper Side and Aft Curtain, Port Rear.
Larson, Cabrio 310, 2003, Bimini Top, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Starboard Rear.
Larson® Cabrio 310 shown with Camper-Top-Canvas-Seamark-OEM-T1.5 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper CANVAS (no frame) with zippers for OEM Camper Side and Aft Curtains (not included), SeaMark(r) vinyl-lined Sunbrella(r) fabric (Bimini and other curtains sold separately), OEM (Original Equipment Manufacturer) in SeaMark® (waterproof) marine fabric, produced with the same high quality, original 2003-2005 digitized patterns approved by Larson® for the Cabrio 310 Mid-Cabin with factory installed, Aft Facing Radar Arch and [1019xxccc] tags:
Notes:
2003-2005 Larson® Cabrio 310 Model Specific Details: 2003-2005 Larson® Cabrio 310 Mid-Cabin with factory installed, Aft Facing Radar Arch and [1019xxccc] tags. Larson® originally offered the 2003-2005 Cabrio 310 in Captain Navy, Mediterranean Blue Tweed, Linen Tweed or Concord Sunbrella® with SeaMark® (vinyl lined, waterproof Sunbrella) tops fabric. Part Numbers: 2003-2005 Larson® Cabrio 310 factory OEM canvas, covers & frames have Ameritex® tags p/n [1019xxccc S-LB 310 R/A].
Product Details: The Camper-Top is the single Top canvas piece at the back of the boat, mounted on a separate Camper-Top-Frame (sold separately) which attaches to the back of a Bimini-Top, Convertible-Top, Arch-Aft-Top or Arch (other tops sold separately). The Camper-Top combines with Curtains (sold separately) to fully enclose the back of the boat providing full, protected (standup) use of the rear cockpit area at the dock.
Included: Single Camper-Top-Canvas piece with Zippers on edges,
NOT Included: Frame, Curtains, Mtg. Hardware, Boot-Cover and other Bimini/Convertible/Arch-Tops and Frames are NOT included.
Larson® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Larson® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Larson® Hull Identification Number (HIN) = LARsssssmbyy (1972-2010) or IJLsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2003,2004,2005} Larson® Cabrio 310 Mid-Cabin with factory installed, Aft Facing Radar Arch and [1019xxccc] tags.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1019xxccc S-LB 310 R/A]. ("ccc" is the color code).
Pockets (some with zippers) to fit onto Factory OEM Camper-Top-Frame bows (frame NOT included).
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Attaches (typically zips) to the back of a Radar Arch, Bimini-Top, Convertible Top or Arch-Aft-Top (other tops NOT included).
Has zippers along sides and back for Camper Side and Aft Curtains IF offered (NOT included).ONLY fits Factory Original-Equipment Camper-Top Frame, Sides and Aft Curtains.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-5 week Lead-Time est. after order finalization as of 5/14/25.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Larson Camper-Top-Canvas-Seamark-OEM-T1.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RnR-Marine™ is rated 4.4 / 5.0
based on 149
RnR-Marine™ Customer reviews
and 24
Better Business Bureau® reviews