Factory Snap-On COCKPIT COVER with Adjustable Aluminum Support Pole(s) and reinforced Snap(s) for Pole alignment in Center of Cover on Larger Cockpit-Covers, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2004-2009 digitized patterns approved by Larson® for the Cabrio 260 No Arch: 260 Cabrio Mid-Cabin, no Arch:
Notes:
2004-2009 Larson® Cabrio 260 No Arch Model Specific Details: 2004-2009 Larson® 260 Cabrio Mid-Cabin, no Arch. Stainless steel frames. Larson® originally offered the 2004-2009 Cabrio 260 No Arch in Black, Mediterranean Blue Tweed, Linen Tweed or Burgundy Sunbrella® fabric. Part Numbers: 2004-2009 Larson® Cabrio 260 No Arch factory OEM canvas, covers & frames have Ameritex® tags p/n [103xxxccc - S-LB 260 CAB].
Product Details: Snaps tightly over Cockpit Area ONLY (not the Bow area) of boat. Cockpit-Cover has 30 to 80 standard 3/8-inch snaps, depending on the boat. Stainless steel Canvas-Snaps are included but not installed in the cover. Includes Male Snap-Stud-Screws. Premium (extra cost) Sunbrella colors are: Jockey Red, Yellow, Logo Red, Burgundy, and Orange.
Larson® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Larson® OEM canvas part number scheme: Ameritex® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Larson® Hull Identification Number (HIN) = LARsssssmbyy (1972-2010) or IJLsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2004,2005,2006,2007,2008,2009} Larson® Cabrio 260 No Arch: 260 Cabrio Mid-Cabin, no Arch.
Only fits Factory-Original Windshield, Arch/Tower (if so equipped) setups.
Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
Made per Factory-Original specification (many Cockpit-Covers do NOT offer special Cut-Outs).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-5 week Lead-Time est. after order finalization as of 5/14/25.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Larson Cockpit-Cover-OEM-T2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made® which have P/Ns starting with 4 or 6) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (1xxxxxxxx , NO 4xxxxxx or 6xxxxx), DT date code AND A PHOTO of this Ameritex® Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Email us for 2012-2014 Larson® FX, LX and Triumph™ canvas and covers. Zippers on OEM Larson® Ameritex® canvas are size #8 (6 teeth/inch) (Dowco® are Size #10). Most (NOT All) Larson® Bimini Tops have zippered frame (bow) pockets for easy installation. Larson® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RnR-Marine™ is rated 4.4 / 5.0
based on 149
RnR-Marine™ Customer reviews
and 24
Better Business Bureau® reviews