2001-2001 Boston Whaler® Montauk 170 Model Specific Details: The 2001 Montauk 170 windshield grab rail is 45-46 inches high: the Montauk-T-Topless™ (MT2™) provides 6-foot 2-inch clearance, and clears the original 94 quart Igloo® cooler with cushion when lowered (clears bow rails when lowered), or can be mounted lower (may not clear cooler if mounted too low), and should be installed by mounting the rear legs flipped upside down to the Reversible Pilot Seat. We also have the Carver® p/n 10361 Reversible Pilot Seat (RPS) Sunbrella® Cover (non OEM) and p/n 10362 Console (no T-Top) Sunbrella® Cover (non OEM) which are not listed here yet.
Pair of Frames (Port and Starboard Front Frames, Side Frames and Rear Corners),
Pair of Rear-Legs (with quick release pins on lanyards),
Curved Rear-Cross-Bar,
Telescoping Front-Cross-Bar with Spacers,
Stabilizer-Bar with adjustable rail clamp and quick release pin on lanyard,
(5)each 7/8" or 1" OD Mounting Clamps (Montauks and Outrages are 7/8"),
Sunbrella® Canvas and Lacing Cord.
Size/Fit:Verify fit on your boat!
Fits Montauk™ 17/170, Outrage™ 18 and other Whalers with factory console and factory stainless steel grab rails (as well as other boats):
1973-2001 Montauk 17/170: 6'1" to 6'5" height,
2002-2007 Montauk 170: 5'11" to 6'3" height (lower console),
2008-current Montauk 170: 6'3" to 6'7" height,
1981-2000 Outrage18: 6'1" to 6'5" height,
most other Outrages, Montauk 150s and Dauntless 15-200,
Montauk 190: grab rails are too wide to fit,
Montauk 210: please meausre,
other (non Whaler) boats with 31-35" wide, raked forward (+5° to +45°) Stainless Steel Windshield Grab Rails (NO Aluminum rails). Please click for Diagram to Measure your Windshield Grab Rails.
Clears standard Igloo® 86 quart (pre-1990) or 94 quart (1990+) cooler used on Montauks,
Allows use of factory rod holders on front of Console and on factory Reversible Pilot Seat,
Overall height is 27" to 29" above the windshield grab rails (1-2" can be gained by mounting the rear legs higher),
Does NOT fit 3/4", 1.00" or larger dia. rails,
Fits under standard Boat Covers,
Use our Spray Shield instead of a Console Cover,
Ships (insured) in a sturdy 49"x18"x5" x 37lb box (signature required).
Options:
Gear-Loft stores 4-5 PFDs above your head (Black Phifertex® keeps gear dry), frees cooler for drinks,
Installation: Installs in 2 hours with a large Phillips Screwdriver, 7/16" Box End Wrench and 3/16" Allen Wrench per the Montauk-T-Topless-2™ Installation Guide. Rear Legs mount to the back of the Windshield Grab Rails or the Reversible Pilot Seat. Finally, Lace the Canvas onto the Frame .
Not what you need? Try:
_on-the-water_stbd-front_800x.jpg "Montauk-T-Topless™MONTAUK-T-TOPLESS-2(tm) (MT2(tm)) patent pending, stainless steel, folding T-Top (click for full-size picture)")
_Raised-Drawing_800x.jpg)
_Lowered-Drawing_800x.jpg)
Does NOT fit 3/4", 1.00" or larger dia. rails,
RNR-Marine™ has an _Installation-Drawing_800x.jpg)
RNR-Marine™ is rated 4.78 / 5.0
based on 146
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews