Carver® UNassembled, folding Bimini Top with 2, 3 or 4 bow round aluminum tube frame, nylon fittings/hardware, straps and matching storage boot. Carver® has over 30 years of experience building Bimini-Tops and Boat-Covers.:
Notes: Sun and rain protection with all the headroom you want in a variety of colors. There is a standard size and style Carver® bimini top to accommodate almost any boat from inflatables to cruisers. This UNassembled Aluminum Bimini-Top is built tough and durable to meet standard marine applications, yet easy to install with just a drill and screwdriver. Includes:
Canvas: Sunbrella® or Outdura® 100% solution dyed 9.25oz./sq.yd. marina Acrylic fabric, Sun-DURA® heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed (color all the way through the fabric threads rather than just on the surface, so no fade) marine grade polyester fabric with a 100% polyurethane finish coating or PolyGuard® polyester fabric (NO zippers on front, sides or back),
Frame: UNassembled, sturdy 7/8-inch OD, round heavy-wall anodized Aluminum tubing bows (2, 3 or 4) with Black Nylon Fittings,
FREE Matching Color Zippered Storage Boot Cover included,
Deck Mounts, Straps and Strap Eyes:
(2)ea. Black Nylon Deck Hinge fittings with 316 Stainless screws for mounting to boat,
(4)ea. Black Solution Dyed Polypropylene Bimini Straps with 316 Stainless Steel Buckles/Ends and Adjusters,
(4)ea. Type 316 Stainless Steel Strap Eyes with 316 Stainless Screws (to hook bimini straps to boat).
Measure Boat's Width: Measure the distance between the mounting points on each side of the boat. Select appropriate range to include your width. To Find Mounting Points - Select a point on each side of the boat that will be the middle of the bimini based on the desired length,
Select Bimini Length: The amount of shade coverage you want from your bimini - generally from in front of the captain's chair to behind the middle seats, and
Determine Bimini Height (from Gunwales): The height of the bimini is the height from the mounting points to the underside of the top. To determine the standing height, measure from the floor of your boat to the mounting points on the side of the boat, then add this measurement to the quoted height of the bimini. Be sure to plan for where to fold the top down.
These Bimini-Top are NOT the Factory Original and do NOT have zippers to mount front, side or aft eisenglass visors/connectors, windshields or curtains.
Warranty: The materials and workmanship are guaranteed by Carver® to be free of defects at time of manufacture and are covered by Carver's® https://www.carvercovers.com/about-carver/product-warranty-information/ limited warranties: Sunbrella®/Outdura®: 10 years, Sun-Dura™: 7 years. The following VOIDs warranty: 1) use of Bungee Cords instead of Tie-Down Straps on Boat-Cover, 2) use of Boat-Cover IN Water (because the cover will stay wet).