Carver® p/n 74521S Universal (non-OEM) SunDura® Under-Watersports-Tower Boat Cover for Tournament Ski/Wake Boat, size: 20ft,7in to 21ft,6in CLL, 102-inch BEAM:
Under Tower Cover Tournament Ski Boat
(click image to enlarge)
| Click to see: |
- Notes: This cover is designed for an 20ft,7in to 21ft,6in CLL, 102-inch BEAM Tournament-Style Ski Boat with WaterSports Tower, Carver® Under-Tower (Tournament Ski Tower TST) Ratchet Boat Covers are available for most Tournament Ski/Wake Boats (Malibu, Mastercraft, Nautique, Correct Craft, Tige, Supra, Centurion, Moomba, etc.) with Watersports Towers. This cover will protect the entire boat from the sun's harmful and damaging UV rays, rain and bird poo:
- Velcro-lined Tower Slots on each side accomModate many styles and sizes of watersports towers and fit snugly to keep the boat full protected,
- This Trailerable boat cover fits tightly with (2) Rope Ratchets and (12)each 8-foot Tie-Downs with adjustable snap buckles included,
- Sun-DURA® fabric ,
- 4-Ply join seams (no raw edges),
- Strong and durable 1/4" Rope encased in hem for a snug fit,
- Double Stitch construction for added strength and durability,
- Reinforced at key stress points to reduce wear and prolong cover life,
- For clean storage, trailering, mooring and winter storage,
- Made-to-order and shipped from Carver® Covers, Inc. in South Carolina, USA.
- Fits 20ft,7in to 21ft,6in CLL, 102-inch BEAM Tournament-Style Ski Boat with WaterSports Tower
- TOWER SLOTS (108 inch long) begin 76-1/2 inches from bow on each side for tower legs
(some towers may be too far back or forward, see diagram at right),
- Measure and Verify (see drawing and chart at right):
- Center Line LENGTH (CLL) from tip of the bow to the back of the boat's fiberglass transom (NOT to the back of a Swim Platform if you have one),
- BEAM (boat's width),
- Fits tightly under the rub rail all around and does NOT cover Swim Platform,
- The cover opens and closes below the Tower Slots and is secured tightly with (2) Rope Ratchets (included) to 1/4" Rope in the Hem,
- Tie-Down Loops sewn in the hem every 3-4 feet to secure the cover to your trailer using:
- (12)each 8-foot Tie-Down Straps (included) for Trailer storage or
- Sand Bags (4 to 10) for Float, Lift or In-Water storage,
- Measure carefully, as this is NOT an OEM Cover.
- All sizes of Under-Tower Covers for Tournament Ski Boats,
- #640xxA 30-inch Skirts protect sides of boat from UV damage,
- #61010 Sand Bags for Floats, Lifts or In-Water storage,
- #60000 Support Pole snaps into sewn-in pad(s) under cover,
- #60002 Vented Support Pole.
- Warranty: The materials and workmanship of this products are guaranteed by Carver® to be free of defects at time of manufacture and are covered by the Carver® https://www.carvercovers.com/about-carver/product-warranty-information/ limited warranties: Sunbrella®: 10 years, Sun-Dura™: 7 years, Performance Polyguard®: 5 years. (Product warranties are listed on http://www.rnr-marine.com/Warranty.shtml).
- Installation: Cover is rolled and packaged with the bow end of the cover to the outside. The tag on the bow end is sewn into the inside hem of the cover. To cover your boat, start at the bow and work backwards. This cover has tower slots on each side that velcro around your watersport tower legs, and tie tightly closed at the hem on each side with supplied rope ratchets. Detailed installation instructions are included with the cover.
- More Info: https://dealerguide.carvercovers.com/boat-styles/37
- Manufacturer's Suggested Retail Price (MSRP): $779.8536