Notes: The *NEW* Patent-Pending Strapless-Bimini™ takes the hassle out of Bimini Tops by:
Eliminating annoying straps that prevent fishing and access to board or swim from the boat
Provides 12-inches of adjustment at the front to allow the Bimini-Top to TILT fore or aft to block the sun or rain and improve ride angle underway.
The Strapless-Bimini™ is made of 1-inch diameter, type 316 stainless steel (never rusts) with welded end fittings (nothing to fall apart) and a click button to adjust the tilt. What could be easier? Plenty of shade, and no straps .. go STRAPLESS today. Center Console Bimini Kit:
(2)ea. Adjustable (17.25 to 29.5 inches in 2-inch increments) Vertical Support(s)
(2)ea. 32-inch Horizontal Bar(s)
(4)ea. 1" Black Nylon Clamp(s), Quick-Release
(2)ea. 1" Black Nylon Clamp(s) with Screw
(4)ea. Quick-Release-Pin(s) (to lower)
(2)ea. Stainless Steel Deck Hinge(s) (90degree) with Screws
Size/Fit: Be sure of your Frame's diameter, as we do not exchange fittings for free. Most boat top frames are 7/8-inch diameter (especially if they are aluminum). If they are stainless steel, they may be 7/8" (after-market) or 1" diameter (OEM or typical if the boat is 30-foot or larger). If you are having trouble determining the diameter, measure the circumference by wrapping a paper or piece of tape around the frame, and making arks which you can measure when flattened.. If this measures as follows:
CIRCUMFERENCE = DIAMETER
2.36-inches around = 3/4-inch diameter (we don't have clamps for this),
2.75-inches around = 7/8-inch diameter,
3.14-inches around = 1.000-inch diameter,
3.33-inches around = 1.060-inch diameter (we don't have clamps for this).
Options:Select below from a choice of 7/8 or 1 inch diameter Stainless Steel or Nylon Frame Clamps to mount the Strapless-Bimini™ to your existing Bimini Top Frame: