Purchase
Boat-Cover CSF Style

Boat-Cover-CSF-Style™Carver(r) Styled-To Fit(tm) boat covers provide a guaranteed fit on almost any other boat based on style, length, width and other parameters, with durable reinforcements at key stress points to provide extra durability for many years of trouble-free performance

Carver® Custom Fit Boat Cover, Center Console, Starboard Front.

Carver® Styled To Fit Boat Covers, Cover Page.

Images (random) of Boat-Cover-CSF-Style
(click images to enlarge).

© 2003-2026

Not what you need? Try:
Searching for your boat or product and we have Boat-Cover-CSF-Style for these other boats...

Carver® Styled-To Fit™ boat covers provide a guaranteed fit on almost any other boat based on style, length, width and other parameters, with durable reinforcements at key stress points to provide extra durability for many years of trouble-free performance:

Notes: Styled-To-Fit® Boat Covers have been manufactured in the USA by Carver® Covers for 40+ years:
1. Patterned by style/length/beam boat,
2. Solution-Dyed Fabric choices (meaning the dye color goes all the way through the fabric threads rather than just on the surface, to reduce fading):
  - Sunbrella® 9.25oz/sq.yd solution-dyed pure Acrylic,
  - Sun-DURA® heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed marine grade Polyester with a 100% polyurethane finish coating,
  - Mossy Oak® Camo 8oz/sq.yd marine grade Polyester (offered on fishing boats),
  - Poly-Guard® 8oz/sq.yd marine grade Polyester.
3. Join seams are folded four-ply (no raw edges) and sewn with double-stitches using weather resistant anti-wick thread for added strength and durability,
4. TIE-DOWN-LOOPS (every 2 feet) double sewn in an offset "V" for strength and less strap twisting,
5. Can be used IN-WATER as a MOORING COVER with Sand Bags (below),
6. TRAILERABLE in most cases (with included Tie-Down Straps),
7. 1/4" Stretch Cord sewn into hem to pull tight to secure cover under rub rail,
8. Motor Covers are sewn into outboard (O/B) model boat covers (some designs come with separate motor cover).
Size/Fit:
- Fits Standard Integrated Fiberglass Swim Platform (molded into hull, as shown at right) if so equipped,
- Pedestal Seats MUST be REMOVED from FISHING BOATS,
- Does NOT FIT THE FOLLOWING
  UNLESS SPECIFICALLY STATED IN BOAT DESCRIPTION:
  - Other boat model or years,
  - Wakeboard Tower,
  - Folded or Upright Bimini-Top,
  - Radar Arch,
  - Camper-Top,
  - T-Top,
  - Hard-Top,
  - Ski Tow Pylon,
  - Wooden, Poly or Add-On Swim Platform,
  - Bow or Stern Mounted Trolling Motor,
  - Raised or protruding antennas, brackets, winches, mirrors, rod holders, etc.,
  - Will NOT fit ANY NON-Factory-Installed Arch, Tops or Wakeboard Tower even though they may be the OEM part as the installer may have installed it in a different location.
- Cover is NOT intended for use on a LIFT, as it is difficult (or impossible) to pull the cover back over the transom properly,
- This cover MAY fit other model years of the same boat, but we cannot guarantee fit, so this is at your own risk,
- IMPORTANT: Trailerable boat covers must be properly installed and tied down with Optional Tie-Down Straps connected to double "V" loops sewn on the bottom edges of the cover.
Options:
1. Buy ONE (1) Foot Longer Cover for a JACK PLATE or BRACKET,
2. p/n 61001 (12) 8-foot Tie-Down Straps and Mesh Storage Bag (2nd set required for trailering boats over 20ft),
3. p/n 61010 (4) Sand Bag Kit,
4. p/n 61015 Pontoon Mooring Kit: (8) Sand Bags, (3) Vented Poles,
5. p/n 60000 Anodized Aluminum Support Pole with 8x8 Adhesize Snap Patch,
6. p/n SNAP 8x8 Adhesive Snap Patch to use existing Snap-Top Pole,
7. p/n 60002 Vented Anodized Aluminum Support Pole,
8. p/n 60008 Y-Strap Boat Cover Support System,
9. p/n 61050 Cover Reinforcement/Repair Kit for added padding or to make repairs,
10. p/n 640xxA 30-inch Skirts protect colored sides from UV,
11. Make the Motor Cover Separate (Not Attached).
Alternatives:
- COPY YOUR EXISTING COVER(s),
- Carver® Custom-Fit™ Boat Covers,
- TTopCovers™ Under T-Top/Hard-Top Boat Covers (custom fit),
- Carver® Over T-Top/Hard-Top Boat Covers,
- Carver® Over Wakeboard Tower Boat Covers,
- Carver® Flats Boat Covers with Poling Platform.
Guarantee: RnR-Marine™ and Carver® Industries, Inc. (the manufacturer) guarantee the quality of workmanship and materials, and will resolve quality issues found upon delivery by repairing or replacing (at their discretion) the item in question. Carver® also guarantees that Custom-fit® and Styled-To-Fit® Boat Covers will fit the specified year, make, mode and configuration or we will resolve the issue (https://dealerguide.carvercovers.com /mmy /boat).
Warranty: The materials and workmanship are guaranteed by Carver® to be free of defects at time of manufacture and are covered by Carver's https://www.CarverCovers.com/About-Carver/Product-Warranty-Information/ limited warranties: Sunbrella®/Outdura®: 10 years, Sun-Dura™: 7 years. (Note: The use of Bungee Cords instead of Tie-Down Straps on Boat-Covers will void the warranty). (All product warranties are listed on https://RnR-Marine.com/Warranty.shtml#Warranties).
Installation: Cover is rolled and packaged with the bow end of the cover to the outside. The tag on the bow end is sewn into the inside hem of the cover. Start at the bow and follow these instructions: Carver® Boat Cover Installation Instructions.
Maintenance and Care: Canvas Care and Maintenance
More Info: https://www.carvercovers.com/styled-to-fit-boat-covers/
Reviews: RnR-Marine™ is rated 4.0 / 5.0 based on 153 RnR-Marine™ Customer reviews and 24 Better Business Bureau® reviews
★★★★✬
Video Link: https://www.youtube.com/watch?v=1W4dCGZxxNw&rel=0
- Select boat for Boat-Cover-CSF-Style:
- Search for canvas for
  Find your boat:
  
  Manufacturer:
  Boat Model:
  , or
- Click to EMAIL Sales @ RnR-Marine.com for Boat-Cover-CSF-Style products.