2003-2008 Sea-Pro® 206CC Factory Original (OEM) Canvas & Covers, T-Topless™ Folding T-Tops, Shade Kit, TTopCover, T-Top Curtains, Bimini-Tops and Boat-Covers 
Follow RNRMarine™ on Twitter® Logo Image RNR-Marine™ on YouTube® Image See RNR-Marine-Inc.™ on LinkedIn® Image
To find factory OEM & custom fit canvas, tops, covers & carpet, enter:
Manufacturer:
Boat Model
:
RNR-Marine™, Inc has Factory Original-Equipment (OEM) Canvas for 1,000's of boats and manufactures the T-Topless™, Montauk-T-Topless™, Shadow™, Montauk-Shadow™ and Flats-Top™ folding and removable tops for Center Console and Flats Boats
(c) RNR-Marine, Inc.

10/12/24 RnR Marine™ Status:

Covers and Carpet
  New, Factory OEM OVERSTOCK (Save 25-75%): OVERSTOCK for:
    Sea Ray, Whaler, Regal, Malibu, Mastercraft & Cobalt
OVERSTOCK for:
    Chaparral, Rinker, Larson, Formula, Robalo & Trophy

  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Canvas, Curtains, Frames and Covers...

TTopCover™ Under T-Top or Hard-Top Boat Covers T-Top Mooring/Storage Curtains Carver® Custom-Fit™ Trailerable Boat Covers for 1,800+ boats Carver® Styled-To-Fit™ Trailerable Boat Covers for 15,000+ boats Carver® Center Console Boat Covers LaPortes® Center, Dual Console & Flats Boat Covers Laportes® Custom Trailerable, Center Console (No T-Top) Boat Covers Carver® Over T-Top or Hard-Top Boat Covers Carver® Under Wakeboard-Tower Boat Covers Carver® Over Wakeboard-Tower Boat Covers Carver® Flats-Boat with Poling-Platform Covers Universal Console Covers, No T-Top Universal Leaning-Post Covers Universal Reversible (Flip-Flop) Seat Covers Carver® Zippered Sunbrella® Bimini Boot Cover Snap-In-Carpet™ Mat Set   Motorcycle covers (Winter 2021)
  Snowmobile covers (Winter 2021)
  Golf Cart covers (Winter 2021)
  ATV covers (Winter 2021)
  UTV covers (Winter 2021)
  Sport UTV covers (Winter 2021)
  Snowmobile covers (Winter 2021)
  RV covers (Winter 2021)
  Carver® PWC covers (Winter 2021)
  Kayak covers (Winter 2021)
  Canoe covers (Winter 2021)

  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Bow, Cockpit, Mooring, Top, Seat and Dash Covers...

TRACK your Order
Tops
Measure Center Console Boat for T-Topless™ or Montauk-T-Topless™ T-TOP Stretchy Shade Extension Kits for center console boat's Bow or Aft Cockpit T-Shade™ Rigid Shade Extension Kits for center console boat Cockpit HARD-TOP Shade Extension Kits for Walk-Around, Express or Dual Console boats BIMINI Shade Extension Kits for most Bimini Tops Carver® Aluminum Bimini Top (UnAssembled) Carver® Stainless Bimini Top (UnAssembled) Carver® Stainless Sunbrella® Bimini Top (Assembled) Carver® Pontoon Bimini Top Carver® Under Wake Tower Top NEW! Fishini™ Bimini-Top Replacement 3 Round Bow Carver® Bimini-Top Canvas & Boots Replacement 4 Round Bow Carver® Bimini-Top Canvas & Boots Carver® Replacement Pontoon Top Canvas & Boots (with Light Cutouts) Carver® Zippered Sunbrella® Bimini Boot Cover
  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Tops, Frames, Canvas and Covers...

T-Tops Comparison Compare to the Competition
T-Topless™ folding T-Top photos & images Montauk-T-Topless™ folding T-Top photos & images Shadow™ folding T-Top kit photos & images Montauk-Shadow™ folding T-Top kit photos & images TTopCovers™ T-Top boat cover photos Videos TRACK your Order
Customer Service
Sea-Pro®
206CC
(2003-2008)

Photo of Sea-Pro® 206CC, 2003: LayoutPhoto of Sea-Pro® 206CC, 2003: Layout

Photo of Sea-Pro® 206CC, 2003: Layout 234x123Photo of Sea-Pro® 206CC, 2003: Layout 234x123

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-TopPhoto of Sea-Pro® 206CC, 2004: EMC Factory T-Top

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top
Sea-Pro® 206CC, 2004: EMC Factory T-Top

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top , 2012dec31
Sea-Pro® 206CC, 2004: EMC Factory T-Top , 2012dec31

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top
Sea-Pro® 206CC, 2004: EMC Factory T-Top

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top , 2012jun20
Sea-Pro® 206CC, 2004: EMC Factory T-Top , 2012jun20

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 280x210Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 280x210

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 296x222Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 296x222

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 356x267Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 356x267

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 402x267Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 402x267

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 560x420Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 560x420

Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 560x420, 2012jun20Photo of Sea-Pro® 206CC, 2004: EMC Factory T-Top 560x420, 2012jun20

Photo of Sea-Pro® 206cc, 2004: Factory OEM T-Top Red Spray-ShieldPhoto of Sea-Pro® 206cc, 2004: Factory OEM T-Top Red Spray-Shield

Photo of Sea-Pro® 206CC, 2005: OEM Factory T-Top Black Sunbrella Canvas White Sunbrella Spray-Shield Black Phifertex Gear-NetPhoto of Sea-Pro® 206CC, 2005: OEM Factory T-Top Black Sunbrella Canvas White Sunbrella Spray-Shield Black Phifertex Gear-Net

Photo of Sea-Pro® 206CC, 2008: (Factory OEM website photo)Photo of Sea-Pro® 206CC, 2008: (Factory OEM website photo)

T-Topless-2™ Folding Stainless Steel T-Top in Sunbrella^®^;
T-Topless-2™ Folding Stainless Steel T-Top in Sunbrella® Marine Fabric


Photo of Sea-Pro® 206cc 20xx Factory Console-Cover
Sea-Pro® 206cc 20xx Factory Console-Cover

Photo of Sea-Pro® 206cc 20xx Factory Console-Cover 560x420Photo of Sea-Pro® 206cc 20xx Factory Console-Cover 560x420

TTopCover^&trade^; Under T-Top Boat-Cover
TTopCover™ Under T-Top Boat-Cover covers entire boat and motor under T-Top

Carver T-Top/Hard-Top Boat-Cover
Carver® T-Top/Hard-Top Boat-Cover goes over entire Top, Console, Seats, Boat and Motor

T-Top and Center Console Storage and Mooring Curtains
Under T-Top Mooring Cover protects Center Console (Electronics and Instruments), Helm Seat(s) (or Leaning Post) and Front Seat... GREAT for mooring in water or storage

Carver Universal Over T-Top Cover
Universal Over T-Top Cover protects T-Top (Hard or Canvas), Center Console (Electronics and Instruments), and Helm Seat(s) (or Leaning Post)... also GREAT for storage or in-water use

Carver No/Low Bow Rail Center Console Boat Cover, No T-Top
Carver® Center Console, NO Bow Rails, Single Engine Boat Cover covers Center Console Boat with Single Engine and NO/Low Bow Rails (No T-Top)

Carver High Bow Rail, Single Engine Center Console Boat Cover, No T-Top
Carver® Center Console, HIGH Bow Rails, Single Engine Boat Cover covers Center Console Boat with Single Engine and High Bow Rails (No T-Top)

Carver High Bow Rail, Twin Engine Center Console Boat Cover, No T-Top
Carver® Center Console, HIGH Bow Rails, Twin Engine Boat Cover covers Center Console Boat with Twin Engines and High Bow Rails (No T-Top)

Universal Center Console Cover
Sunbrella® Center Console Cover (universal, No T-Top) protects Center Console, Electronics and Instruments

Universal Leaning Post Cover
Leaning-Post Cover (universal)

Universal Reversible Seat Cover
Reversible (Flip-Flop or Pilot) Seat Cover (universal)

Boat Shade Kit
Shade-Extension Kit attaches to your existing top to provide more shade for your family

Fishini^&trade^; Bimini-Top
Complete (strapless) Fishini™ Bimini-Top with Boot Cover & Rod Holders

Aluminum Bimini Top
Complete, stand-alone Aluminum Bimini-Top with Boot Cover

Stainless Steel Bimini Top
Complete, stand-alone Stainless Steel Bimini-Top with Boot Cover

Most Sea-Pro OEM Canvas Offered in Sunbrella® Marine Fabric
Sea-Pro® Factory Original-Equipment Sunbrella® Marine Canvas


All products are Made in the USA

Home Sea-Pro Sea-Pro 206 2003-2008 Sea-Pro 206CC

Sea-Pro® 206CC (2003-2008) center console boat:




  1. T-Topless™ - Our newly redesigned (and lower cost) T-Topless-2™ (TT2™) patent-pending, stainless steel, folding T-Top for 15-22' center console boats (plus optional Spray-Shield and Gear-Loft) (Sunbrella 9.25oz./sq.yd. acrylic fabric), custom made for the 2003-2008 Sea-Pro® 206CC , $1,443.00 , SALE PRICE: $1,298.70 (Fall Sale) , Lead time est: 4-8 biz days (October 2024 for Montauk-T-Topless) after order finalization as of 9/3/24.
  2. TTopCover™ T-Top boat cover, Sunbrella® 9.25oz acrylic - Custom fit TTopCover™ (Sunbrella® 9.25oz./sq.yd. solution dyed acrylic fabric), which attaches beneath the factory installed T-Top or Hard-Top to cover the entire boat and motor(s), custom made for the 2003-2008 Sea-Pro® 206CC , $1,451.00 , SALE PRICE: $1,363.94 (Fall Sale) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 9/3/24.
  3. TTopCover™ T-Top boat cover, Elite™ 9oz fabric - Custom fit TTopCover™ (Elite® Top Notch™ 9oz./sq.yd. fabric) which attaches beneath the factory installed T-Top or Hard-Top to cover the entire boat and motor(s), custom made for the 2003-2008 Sea-Pro® 206CC , $1,259.00 , SALE PRICE: $1,183.46 (Fall Sale) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 9/3/24.
  4. UNDER T-Top Mooring Cover - Great for In-Water, Lift, Dry-Stack, Float-Dock or Trailer storage. Easy to install: attaches UNDER the T-Top to completely cover the entire Center Console, Helm Seats (or Leaning-Post) and the Cooler or Seat in front of the Console (measure your Sea-Pro® 206CC T-Top for fit) , (click link to pick size) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 9/3/24.
  5. OVER T-Top Mooring Cover - Great for In-Water, Lift, Dry-Stack, Float-Dock or Trailer storage. Easy to install: goes OVER the T-Top (Hard ot Canvas) to completely cover the entire T-Top, Center Console and the Helm Seat(s) (or Leaning-Post) (measure your Sea-Pro® 206CC T-Top for fit) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  6. (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  7. Carver® NO/Low Bow Rail, Single Engine Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, Center Console Boat (and Motor) with NO/Low Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  8. Carver® HIGH Bow Rail, Single Engine, V-Bow Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, V-Bow Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  9. Carver® HIGH Bow Rail, Single Engine, Round Bow Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, Rounded Bow (Whaler Style) Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  10. Carver® HIGH Bow Rail, Twin Engine Boat Cover, Sunbrella® - Trailerable boat cover for Twin Engine Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  11. Leaning-Post Cover (universal) - Universal (non-OEM) Cover for many Leaning-Posts , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  12. Center-Console Cover (universal) - Sunbrella® Console Covers (non-OEM) in 3 sizes , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  13. Reversible Seat Cover (universal) - Universal (non-OEM) Reversible-Seat Cover for most Flip-Flop and Reversible Pilot Seats , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  14. Carver® 3-Bow Bimini-Top Replacement Canvas - 3-Bow Carver® Bimini-Top Replacement Canvas & zippered Boot-Cover , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24. Complete, strapless Fishini™ Bimini-Top with Boot Cover & Rod Holders
  15. NEW: Fishini™ Bimini-Top - Complete, strapless (uses extension struts inside) Aluminum Bimini-Top with Rod Holders, Boot Cover, Straps and Stainless Steel Mounting Hardware , (click link to pick) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  16. Carver® Aluminum Bimini-Top - Complete Aluminum Unassembled Bimini-Top with Boot Cover, Straps and Nylon Mounting Hardware , (click link to pick) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  17. Carver® Stainless Steel Bimini-Top - Complete Stainless Steel Unassembled Bimini-Top with Boot Cover, Straps and Stainless Mounting Hardware , (click link to pick) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  18. Carver® Stainless Steel Sunbrella® Bimini-Top - Complete Stainless Steel Fully Assembled Bimini-Top with Boot Cover, Straps and Stainless Mounting Hardware , (click link to pick) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  19. Carver® Zippered Folding Top Storage Boot Cover - for Carver® folding Bimini, Sunshade, Camper, Pontoon or Tower Tops when Top is folded and not in use. , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 9/3/24.
  20. Bimini or T-Top Extension Kits - Our unique Shade Extension kits attach to the Bimini or T-Top to extend shade over the cockpit (or bow) with telescoping aluminum Support Poles , from $620.00 , SALE PRICE: $582.80 (Fall Sale) to $1,305.85 , SALE PRICE: $1,227.50 (Fall Sale) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 9/3/24.
Canvas, Covers and Tops are all custom made-to-order and typically ship in 2-11 weeks
(check your cart for actual lead time).


Sea-Pro®: We no longer sell factoror original canvas for Sea Pro® boats as of 2016.

Factory Original-Equipment-Manufacturer (OEM) Canvas for Sea-Pro® boats: Our team patterned and manufactured the Factory Original-Equipment-Manufacturer (OEM) canvas for Sea-Pro® center console, bay, dual console and walk-around boats from 1989 to 2008.

We produce new canvas (diagram explaining what each piece of canvas is called) in White (natural), Black, Navy (not Captain Navy), Forest Green Sunbrella fabric. We often offer ANY color Sunbrella to match your personal taste (these colors may not be available from the dealer). Note: We no longer sell Sea Pro® factory OEM canvas or covers as of Fall 2013, so please contact your local Sea Pro® dealer for OEM canvas. Zippers on OEM canvas were size #8 (6 teeth/inch). Windows are made with 30mill clear vinyl window material. Specifications, care and cleaning of Sunbrella , 30mill clear vinyl and other canvas materials are detailed below. In some cases (if the boat mfgr is out of business for example) you can upgrade the windows to Strataglass coated clear vinyl (approx. 50-60 percent more cost), however the standard Eisenglass (clear vinyl) will last for many years with proper care, cleaning and storage. We utilize our library of 1,000's of patterns to produce new, "made-to-order" Factory Original canvas for your Sea-Pro® boat. This is the same canvas originally offered from the Sea-Pro® Factory and sold by your local Sea-Pro® dealer (local dealers may only go back 5 years or so however, and charge local sales tax, which we do not charge except in SC and FL). No other canvas manufacturer has these patterns or the ability to produce the exact factory Original Equipment Manufacturer (OEM) replacement canvas and covers that were offered from the Sea-Pro® Factory when your boat was new.

Please be sure that you have the Factory Sea-Pro® frame or matching canvas.
Zipper Sizes #8 and #10
Size #10 (5 teeth/inch) and #8 (6 teeth/inch) zipper comparison and measurement
There are no cancellations, refunds or returns on Factory OEM canvas, since it is all "made-to-order" for you. Some owners (and even dealers, when new) installed their own "after-market" Bimini Tops, T-Tops, Hard-Tops and Canvas, so please:

  1. Compare your canvas or frame to the Sea-Pro® factory OEM photos shown here,
  2. Check for "Atlantic Coast" "Atlantic Coast" tags with Sea-Pro® OEM part numbers on existing canvas,
  3. Verify that your existing canvas has # 8 gauge zippers (factory original-equipment Sea-Pro® OEM zipper size):
    • #8 gauge zippers have 6 teeth per inch and will NOT zip to #10 zippers,
    • #10 gauge zippers have 5 teeth per inch and will NOT zip to #8 zippers,
    • See zipper size comparison photo at right,
    • Please note that after-market canvas makers often use the large #10 gauge zippers.
    • The zipper gauge size is actually the height of the teeth, 8mm or 10mm tall for example. (#8 has 8mm tall teeth and #10 is 10mm tall for example). Since it is very difficult to measure the zipper tooth height, the easiest way to measure zipper size is to count the number of teeth over 2 inches: a #8 zipper has 12 teeth over 2 inches and a #10 zipper has 10 teeth over 2 inches.

Since Sea-Pro® is no longer in business and there are no longer any Sea-Pro® dealers, RNR-Marine™ may be your only source for new (not new-old-stock) Factory Original-Equipment-Manufacturer (OEM) canvas and covers.

Additional Shade for Sea-Pro® boats : When its hot you can never have enough shade. Our Boat Shade Kits (starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale)) extend shade over the cockpit or bow (can even be used like a Spray-Dodger) and can be put up or taken down in minutes.

Folding T-Tops to fit Sea-Pro® boats: Our T-Topless™ folding T-Top` fits most Sea-Pro® 170CC through 220CC and SV1700CC through SV2300CC boats. This top lowers (or removes) in less than 15 minutes to store your boat in your own garage or storage building/shed, potentially saving $1,000's per year in storage costs (or let you pass under a low bridge). The T-Topless™ folding T-Top is made of solid, yet lightweight, 1-inch diameter welded 316 Stainless Steel tubing with Sunbrella® canvas and install in an hour on the Stainless Steel windshield grab rails of Sea-Pro® center console boats.

Factory Original-Equipment (OEM) Covers for Sea-Pro® boats : We offer Factory OEM Console, Leaning-Post and Mooring Covers (typically in durable Sunbrella®) to fit your Sea-Pro® boat perfectly.

Custom After-Market Covers for Sea-Pro® boats : We also offer after-market Carver® Custom-Fit™ Boat Covers (from $239), Styled-To-Fit™Boat Covers (from $229) and LaPortes® Custom Fitted Boat Covers (from $449) and in Sunbrella® marine fabric (the best quality, breathable fabric for covers) as well as some excellent high-quality, but less expensive materials, that are designed as a precise fit using measurements taken from your particular model of outboard motor.

For Center Console boats, we also offer Universal (Not OEM) Center Console (No T-Top) Covers, Leaning Post Seat Covers and Reversible (Flip-Flop) Seat Covers.

A popular solution for boats with T-Tops are our T-Top Console-Storage-Curtains, which completely cover the front cooler seat, entire console and helm seats or leaning post (starting at $484.00 , SALE PRICE: $454.96 (Winter Sale)). This is a nice alternative to the factory OEM console-cover and OEM leaning-post or OEM pedestal-seat-cover, typically costing less than the OEM console-cover alone.

Since Sea-Pro® did not offer a factory mooring cover for boats with a T-Top, we offer custom-fit, durable TTopCover® Under T-Top Boat-Covers and Carver® Over T-Top Boat-Covers for Sea-Pro® 170CC through 270CC and SV1700CC through SV2400CC boats with the Factory OEM T-Top or Hard-Top. We have patterned hundreds of boats and T-Tops, so search for your boat or email to see if we have patterned your boat

Sea-Pro® Boat Resources:

Factory OEM and After-Market Canvas

    >
  • Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas that has been sitting on the shelf for years.

  • We make Brand New Canvas Made TO ORDER using the original factory OEM patterns and the following material choices:

  • Marine Canvas choices (dependent on fabric offered by original boat manufacturer):

    • Sunbrella® 9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric Sunbrella® Color Swatches is a tough, water repellent (Fluorocarbon coated), UV resistant, color-fast (the acrylic fiber is dyed before the fabric is woven), breathable (will help keep things dry) woven fabric, manufactured by Glen Raven Mills in Anderson, SC, USA. Sunbrella® is available in a wide variety of colors. The name Sunbrella® is synonymous with the finest outdoor fabric in the world. Sunbrella® withstands sun, wind, and rain while remaining beautiful for years and is backed by a 10-year Limited Fabric Warranty. The water repellency of Sunbrella® can be improved by cleaning and applying "303 High Tech Fabric Guard" periodically. Sunbrella® was offered from the Factory for the OEM Canvas we make for most boat manufacturers, including: Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®, Rinker®, Larson®, Grady White®, Regal® and many more. RNR-Marine™ offers all "Sunbrella® Marine Top Fabric" colors (boat dealers may only have black), including popular Black, Captain Navy, Marine Blue, Mediterranean Blue Tweed, Pacific Blue, Forest Green, Logo Red, Jockey Red, Dubonnet Tweed, Linen, Linen Tweed, Toast Tweed, Silver, Beige and many more. To insure consistencey and avoid mis-matches, the factory original colors may only be offered for many boat manufcaturers. Colors will appear differently on your monitor than the actual fabric application.

    • SeaMark® SeaMark® colors SeaMark® Layers waterproof Sunbrella®, developed by Haartz® engineers who have expertly waterproofed Sunbrella®, the premier woven acrylic fabric, by undercoating the Sunbrella® fabric with a textured marine grade vinyl. SeaMark® offers the best of both worlds - a beautiful, colorfast fabric with the added durability of vinyl. This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength, backed by a 5-year manufacturer's warranty, and is available in many Sunbrella® solid and tweed colors. SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas on many Sea Ray®, Boston Whaler®, Formula®, Chaparral®, Rinker® and Regal® convertible, bimini, sunshade and camper tops for example. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.

    • Ferrari® Stamoid®® waterproof PVC coated, polyester reinforced vinyl "Top" fabric is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric, backed by a 5-year Limited Fabric Warranty. Although Stamoid® is made in a variety of colors, we typically offer only white (Ivory for Grady White®), as used on many yachts.

    • Recacril® Some of our Factory OEM canvas was offered in Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric manufactured by Recasens® USA. as selected by the boat manufacturer. Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric for marine and outdoor use. It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance and is woven in over 50 solid colors and over 80 stripes, although only a limited selection of solid colors are offered for our marine canvas. In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers, and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.

    • Weblon® (Herculite®) Regatta® vinyl-laminated polyester yacht fabric is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric, backed by a 5-year Limited Fabric Warranty. We offer Weblon® in ANY "Weblon® Yacht Fabric" color: White, Ivory, Black, White-top/Mist-Blue-bottom, White-top/Driftwood(gray)-bottom, White-top/Foam-Green-bottom, Ivory-top/Sand-bottom & Burgundy-top/White-bottom. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.

    • ClimaShield® Plus ClimaShield-Plus® colors Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are individually dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • Aqualon® Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric that was offered by the boat manufacturer. Aqualon® is a pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • MarChem CFI® Top Gun® acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier) is made by MarChem® CFI in New Haven, MO, USA using a proprietary process to coat both the top and bottom, thus allowing the fabric to be completely reversible. Water repellect Top Gun™ fabric is characterized by excellent strength, durability, tear and abrasion resistance, dimensional stability, UV and mildew resistance, and is backed by a 5-year Limited Fabric Warranty. We offer Top Gun™ in very few applications.

    • Vinyl ... Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

    • RNR-Marine™ recommends cleaning your canvas or cover to maintain its original beauty and increase longevity.

  • Covers are made of a fabric with a weave that can "breathe" to prevent mold and mildew. Vinyl or vinyl coated fabric, such as Weblon®, Stamoid®, Top Gun® or SeaMark® are not recommended for covers, since the material does not breathe to ventilate the covered space. We offer covers (depending on boat manufacturer) in one or more of the following fabrics:

    • Sunbrella® Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric is used for Console-Covers, OEM Seat-Covers, OEM Leaning-Post-Covers, Bow Covers, Cockpit Covers and Mooring Covers. This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant, and is backed by the Sunbrella® 10-year Limited Fabric Warranty. Sunbrella® is the premium cover fabric in our opinion, since it is tough, breathes and the fabric is woven with solution dyed acrylic fibers, which last longer than polyester and retain colors extremely well. Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®, and is offered for all of our Factory OEM canvas and covers, as well as our Carver® after-market Custom-Fit™, Styled-To-Fit™ Boat Covers and Bimini Tops.

    •  Top-Notch-Elite® 100% Solution Dyed 9 oz./sq.yd. Polyester fabric (in Grey, Tan, Navy Blue or Black) is used for TTopCovers® T-Top/Hard-Top Boat Covers and T-Top Center Console Storage Curtains. Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant, dimensionally stable (won't sag or stretch) and mildew resistant. Because the yarn is solution dyed, color fastness is very good. Top-Notch Elite® is backed by a 5-year Limited Fabric Warranty.

    •  WeatherMax® 100% Solution Dyed 8 oz./sq.yd. Polyester fabric (in Navy Blue or Black) is used for T-Top Boat Covers and T-Top Center Console Storage Curtains. Weathermax-80® is 100% solution dyed polyester incorporating UV resistant characteristics for long-term color and strength retention along with excellent breathablity and abrasion resistance. The HydroMAX® finish raises the bar of hydrostatic performance and delivers unsurpassed water repellency, mildew and oil resistance without relying on environmentally unfriendly coating compounds. WeatherMAX® has anti-microbial properties and a minimum UV resistance of 1000 hours but only weighs 8.0 oz. per square yard due to the use of a filament rather than a spun yarn like acrylic fabrics. Excellent for anything from horse blankets to tough outerwear to marine grade tarps. WeatherMAX® is backed by a 5-year Limited Fabric Warranty.

    • Sun-DURA® heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric with a 100% polyurethane finish coating with a is used for Carver® Custom-Fit™, Styled-To-Fit™ Trailerable and Over-Top Boat Covers, Universal Seat-Covers and Universal Leaning-Post Covers. 100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries. Carver® Sun-DURA® is backed by a 7 Year Limited Warranty.

    • Black Resilience is a proprietary tough, black or white stretchy fabric (like Spandex) with a quadruple coating on the outside to reflect the sun to keep things cool beneath. We use Resilience™ on our T-Top-Storage-Bonnet (1-Year Limited Warranty) and T-Top-Dry-Stack-Covers (3-Year Limited Warranty). This is the same fabric made for the US Government to cover fuel storage tanks in the desert to keep them cool. The Limited Warrnty on these products includes free repair for any damage caused by poor workmanship (excludes abuse).

    • ClimaShield® Plus Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are indvidualy dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • Poly/Cotton Duck ... 50/50 polyester/cotton "Duck" fabric (from Dutch "doek") is a heavy, plain woven blended fabric offering the advantages of both cotton and polyester fibers blended in one fabric. Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat. However, as the thickness increases, the breathability decreases. 100% cotton tends to rip and wear out easily, depending on the weave. Cotton canvas is a very durable and abrasion-resistant fabric, but it can be very thick and heavy. Polyester does not breathe, but it is very elastic and therefore tends to be very tear resistant. However, it is not as abrasion-resistant as cotton canvas. Poly/Cotton blend fabrics combine the strengths of the two fibers. Poly/cotton fabric is breathable, tear-resistant, and can be fashioned into abrasion-resistant fabrics, like canvas. We make many older Factory OEM Mooring Covers (to order) in Grey #6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.

    • Vinyl ... Some of our Factory OEM covers are available in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

  • Phiferext® open weave vinyl covered polyester "Standard Mesh Solids" fabric (very breathable) is used on Gear-Nets and Mesh Windshield-Covers. Although there are a wide variety of Phifertex® colors, most Gear-Nets and Windshield-Covers are Black, Grey or White.

  • Visors, Connectors, Spray-Shields, Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings are typically made with a combination of canvas (above) and either:

    • Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl (often called "Eisenglass" or "Isinglass") as specified by the boat manufacturer. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

      or

    • Strataglass® premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost) engineered to be ultra clear and resistant to the damaging effects from the sun's rays, environmental fallout and scratching from handling. It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC). Read more about Strataglass® advantages. Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick), 40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness. The 40-mil is available in a clear, light smoke or dark smoke tint, which is a special order (adds another 10% to the cost and 2 more weeks). We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore. Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled. Strataglass® claims a 5 year life expectancy (care & exposure dependent), but notes that many yacht owners see 10 or more years of use with proper care.

    • RNR-Marine™ recommends cleaning and removing all clear-vinyl prior to trailering, to avoid the harmful efects of rocks, bugs and oils on the vinyl!

TRACK your RNR-Marine™ order: Email Address:



RNR-Marine™ Products are Made in the USA, Image
RNR-Marine, Inc. is Verified by PayPal's Verification Seal Image
Sponsor, TheHullTruth.com
Sponsor

Some photos show optional items mounted on standard products. Descriptive, typographical or photographical errors are subject to correction. Valid HTML 4.01 Transitional Valid CSS! 3.239.3.196 ,