Sea Ray®:
Canvas for Sea Ray® boats was manufactured by BLI®, Gioia®, Great Lakes® and Ameritex® for which RNR-Marine™ (Ameritex, BLI and Gioia) is an nline dealer. Because the canvas manufacturers work directly with Sea Ray®, every canvas and cover is guaranteed to fit and match the original.
To insure a perfect fit, please provide your Hull Identification Number (HIN), found on your registration papers as well as embossed on the starboard side of the transom). The Sea Ray® HIN tells where and when (exact month and year) your Sea Ray® was manufactured (post 1984 numbering shown here). We only have canvas patterns for boats produced in Tennessee, Florida, and some Michigan and Arizona (no Arizona Sundancers). We cannot guarantee fit for boats produced in Arizona, Ireland or Poland.
Sea Ray® Hull-Identification Number (HIN): SERpssssmbyy means:
- SER = Sea Ray USCG Manufacturer ID
- p = plant code (4th digit in HIN):
- (SERTssssmyxx) - Knoxville, Tennessee Plant: YES, we have canvas patterns for 1993-present boats
- (SERRssssmyxx) - Riverview, Tennessee Plant: YES, we have canvas patterns for 1993-present boats
- (SERVssssmyxx) - Tellico Plant - Tennessee : YES, we have canvas patterns for 1993-present boats
- (SERCssssmyxx) - Cherokee Cove. Tennessee Plant (now Mastercraft plant): We have canvas patterns for some 1993-present boats
- (SERSssssmyxx) - Fort Mill, South Carolina Plant: Only have 2006-current 250SLX and 260SD (Sun Deck) patterns
- (SERNssssmyxx) - Poland Plant: NO Canvas patterns
- (SERZssssmyxx) - China Plant : NO Canvas patterns
- (SERAssssmyxx) - Phoenix, Arizona Plant: NO Original Canvas patterns. If the same boat model was made in Tennessee, we can sell the canvas for the Tennessee boat, but CANNOT GUARANTEE FIT, as the Arizona boats had similar hull, deck and arch molds but the Top Frames were made by a different manufacturer, so you MAY need to replace the frame. There are NO ABSOLUTELY NO REFUNDS or RETURNS on any canvas or frames sold for an Arizona HIN boat.
- (SERPssssmyxx) - Palm Coast, Florida Plant: We have patterns for: 250FA (2005-present), 250SD SunDeck (2005-present), 250SLX (2005-present), 36DB (07-08), 400DB (95-03), 420AC (96-01), 440EB (94-98), 450DA (96-99), 450EB (98-02), 460DA (99-02), 480DB (98-04) and 480MY (03-04)
- (SERFssssmyxx) - Merritt Island, Florida Plant. Only have 2006-current 250SLX and 260SD (Sun Deck) patterns. All canvas for Merritt Island built 360DA, 370DA, 380DA, 400DA, 410DA and 420DA Sundancers and the 410EC Express Cruiser from 1996 to 2006 was made in-house by Sea Ray (we have the frames).
- (SERYssssmyxx) - Sykes Cree, Florida Plant (closed in June 2013): We have patterns for many of these boats, including 250SLX (2006-current), 260SD SunDeck (2005-present), 500DA (97-00 & 03-05), 50DA (09), 510DA 00-03), 52DA (06-09), 540CMY (01-02), 540DA (99-01), 550DA (02-04), 550DB (96-98), 550SDB (04-05), 55DA (07-09), 560DB (96-04), 560DEE (99-04), 58SDB (07-09), 580SS (97-02), 580DA (97-02), 600SS (03-05), 60DA (06-09), 630SS (99-02), 630DA (99-02) and 680SS (01-05)
- (SERMssssmyxx) - Oxford Michigan, Plant: NO Canvas patterns
- (SEREssssmyxx) - Cork Ireland Plant - Cork Ireland ... NO Canvas patterns
- (SERBssssmyxx) - Bucyrus, Ohio Plant: NO Canvas patterns
- ssss = 4-digit Serial Number
- m = Month Built (A=Jan, B=Feb, C=Mar, D=Apr, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L= Dec)
- b = last digit of year Built
- yy = last digits of model Year (97=1997, 00=2000, 06=2006)
In addiition to the HIN, a
Sea Ray® Hull Production Number was used internally by Sea Ray® to identify boats (and specific options by boat). This number is displayed below the HIN on the starboard side of the transom. It is made up of the model number, a dash and a 3 to 5 digit
Hull Number (often referred to in parts manuals) that was the sequential order of the hull built that year of that model type. For example, Sea Ray® Hull Production Number means
460DA568 means the
568th
460 Sundancer (
DA) built (see HIN for specific model year, plant and build month). In order to confirm the model and options specific to this hull, we require this Hull Production Number when ordering canvas for Sport Yachts and Yachts.
Sea Ray® offered its canvas in Sunbrella®marine fabric, and most tops in SeaMark® vwaterrproof, vinyl lined Sunbrella®. Sea Ray® arranged with Glen Raven Mills® for a few special colors of its Sunbrella® fabric (and Hartz® for SeaMark®) offered ONLY to Sea Ray® owners, including Toast Tweed and Marine Midnight, which we carry for all models.
SeaRay.com has great on-line support for owners, including:
Parts Manuals back 20+ years,
Model Specs/Sheets/Brochures Archives back to 1960 and
Past Model Brochures back to 2001. The
Club SeaRay owners group and forums are helpful as well.
Factory Original-Equipment-Manufacturer (OEM) Canvas
for Sea Ray® boats:
Our team
patterned and manufactured the
Factory Original-Equipment-Manufacturer (OEM) canvas for
Sea Ray® all boats
from 1993 to current.
We produce new canvas
(diagram explaining what
each piece of canvas is called)
in Black, Captain Navy, Marine Midnight, many Tweeds and Jockey Red Sunbrella(r) and SeaMark fabric.
We often offer ANY color Sunbrella(r) and SeaMark
to match your personal taste
(these colors may not be available from the dealer).
Note: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Windows are made with 30ga Eisenglass or 40ga Startaglass flat (not rolled) clear vinyl window material.
Specifications, care and cleaning of
Sunbrella(r) and SeaMark
, 30ga Eisenglass or 40ga Startaglass flat (not rolled) clear vinyl
and other canvas materials are detailed below.
In some cases (if the boat mfgr is out of business for example)
you can upgrade the windows to
Strataglass
coated clear vinyl
(approx. 50-60 percent more cost),
however the standard Eisenglass (clear vinyl) will last
for many years with
proper care, cleaning and storage.
We utilize our
library of 1,000's of patterns to produce
new, "made-to-order" Factory Original canvas
for your Sea Ray® boat.
This is the same canvas originally offered
from the Sea Ray® Factory
and sold by your local Sea Ray® dealer
(local dealers may only go back 5 years or so however,
and charge local sales tax, which we do not charge
except in SC and FL).
No other canvas manufacturer has these patterns
or the ability to produce
the exact factory Original Equipment Manufacturer (OEM) replacement canvas and covers that were offered
from the Sea Ray® Factory
when your boat was new.
Please be sure that you have the Factory Sea Ray® frame or matching canvas.
There are no cancellations, refunds or returns on Factory OEM canvas,
since it is all "made-to-order" for you.
Some owners (and even dealers, when new) installed their own
"after-market" Bimini Tops, T-Tops, Hard-Tops and Canvas, so please:
- Compare your canvas or frame to the Sea Ray® factory OEM photos shown here,
- Check for
tags with Sea Ray® OEM part numbers on existing canvas,
- Verify that your existing canvas has # 8 gauge zippers
(factory original-equipment Sea Ray® OEM zipper size):
- #8 gauge zippers have 6 teeth per inch and will NOT zip to #10 zippers,
- #10 gauge zippers have 5 teeth per inch and will NOT zip to #8 zippers,
- See zipper size comparison photo at right,
- Please note that after-market canvas makers often use the large #10 gauge zippers.
- The zipper gauge size is actually the height of the teeth, 8mm or 10mm tall for example.
(#8 has 8mm tall teeth and #10 is 10mm tall for example).
Since it is very difficult to measure the zipper tooth height,
the easiest way to measure zipper size is to count the number of teeth over 2 inches:
a #8 zipper has 12 teeth over 2 inches and a #10 zipper has 10 teeth over 2 inches.
Additional Shade for Sea Ray® boats :
When its hot you can never have enough shade.
Our Boat Shade Kits
(starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale))
extend shade over the cockpit or bow
(can even be used like a Spray-Dodger)
and can be put up or taken down in minutes.
Folding T-Tops to fit
Sea Ray® boats: Our
T-Topless™
folding T-Top`
fits most Sea Ray® Laguna boats.
This top lowers (or removes) in less than 15 minutes to store your
boat in your own garage or storage building/shed,
potentially saving $1,000's per year in storage costs
(or let you pass under a low bridge).
The T-Topless™ folding T-Top is made of
solid, yet lightweight, 1-inch diameter welded 316 Stainless Steel tubing
with Sunbrella® canvas
and install in an hour on the
Stainless Steel windshield grab rails of
Sea Ray® center console boats.
Factory Original-Equipment (OEM)
Covers for Sea Ray® boats : We offer
Factory OEM Bow, Cockpit, Mooring, Dash, Carpet and Windlass Covers
(typically in durable Sunbrella®)
to fit your Sea Ray® boat perfectly.
Custom After-Market Covers for Sea Ray® boats :
We also offer after-market
Carver®
Custom-Fit™ Boat Covers (from $239),
Styled-To-Fit™Boat Covers (from $229) and
LaPortes®
Custom Fitted Boat Covers (from $449) and
in Sunbrella® marine fabric
(the best quality, breathable fabric for covers)
as well as some excellent
high-quality, but less expensive materials,
that are designed as a precise fit using
measurements taken from your particular model of outboard motor.
For Center Console boats, we also offer Universal (Not OEM)
Center Console (No T-Top) Covers,
Leaning Post Seat Covers and
Reversible (Flip-Flop) Seat Covers.
A popular solution for
boats with T-Tops are our
T-Top Console-Storage-Curtains,
which completely cover
the front cooler seat, entire console
and helm seats or leaning post
(starting at $484.00 , SALE PRICE: $454.96 (Winter Sale)).
This is a nice alternative to
the factory OEM console-cover
and OEM leaning-post or OEM pedestal-seat-cover,
typically costing less than the OEM console-cover alone.
Since Sea Ray® did not offer
a factory mooring cover for boats with a T-Top,
we offer custom-fit, durable
TTopCover® Under T-Top Boat-Covers
and Carver® Over T-Top Boat-Covers
for Sea Ray® Laguna boats with
the Factory OEM T-Top or Hard-Top.
We have patterned hundreds of boats and T-Tops, so
search for your boat
or email to see if we have patterned your boat
Sea Ray® Boat Resources:
Factory OEM and After-Market Canvas
>
- Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas
that has been sitting on the shelf for years.
- We make Brand New Canvas Made TO ORDER using
the original factory OEM patterns
and the following material choices:
- Marine Canvas choices
(dependent on fabric offered by original boat manufacturer):
-
9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric
is a tough, water repellent (Fluorocarbon coated), UV resistant,
color-fast (the acrylic fiber is dyed before the fabric is woven),
breathable (will help keep things dry) woven fabric,
manufactured by Glen Raven Mills in Anderson, SC, USA.
Sunbrella® is available in a
wide variety of colors.
The name Sunbrella® is synonymous with the finest outdoor fabric in the world.
Sunbrella® withstands sun, wind, and rain while remaining beautiful for years
and is backed by a
10-year Limited Fabric Warranty.
The water repellency of Sunbrella® can be improved by
cleaning and applying
"303 High Tech Fabric Guard" periodically.
Sunbrella® was offered from the Factory for the OEM Canvas
we make for most boat manufacturers, including:
Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®,
Rinker®, Larson®, Grady White®, Regal® and many more.
RNR-Marine™ offers all
"Sunbrella® Marine Top Fabric" colors
(boat dealers may only have black), including popular
Black,
Captain Navy,
Marine Blue,
Mediterranean Blue Tweed,
Pacific Blue,
Forest Green,
Logo Red,
Jockey Red,
Dubonnet Tweed,
Linen,
Linen Tweed,
Toast Tweed,
Silver,
Beige and many more.
To insure consistencey and avoid mis-matches, the factory original colors
may only be offered for many boat manufcaturers.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof Sunbrella®,
developed by
Haartz® engineers who have expertly waterproofed Sunbrella®,
the premier woven acrylic fabric, by
undercoating the Sunbrella® fabric with a textured marine grade vinyl.
SeaMark® offers the best of both worlds -
a beautiful, colorfast fabric with the added durability of vinyl.
This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength,
backed by a 5-year manufacturer's warranty, and is available in
many Sunbrella® solid and tweed colors.
SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas
on many
Sea Ray®,
Boston Whaler®,
Formula®, Chaparral®, Rinker® and Regal®
convertible, bimini, sunshade and camper tops
for example.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof PVC coated, polyester reinforced vinyl "Top" fabric
is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric,
backed by a
5-year Limited Fabric Warranty.
Although Stamoid® is made in a
variety of colors, we typically offer only white (Ivory for Grady White®),
as used on many yachts.
-
Some of our Factory OEM canvas was offered in
Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric
manufactured by Recasens® USA.
as selected by the boat manufacturer.
Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric
for marine and outdoor use.
It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance
and is woven in
over 50 solid colors
and over 80 stripes,
although only a limited selection of solid colors are offered for our marine canvas.
In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers,
and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.
-
(Herculite®)
Regatta® vinyl-laminated polyester yacht fabric
is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric,
backed by a
5-year Limited Fabric Warranty.
We offer Weblon® in
ANY "Weblon® Yacht Fabric" color:
White,
Ivory,
Black,
White-top/Mist-Blue-bottom,
White-top/Driftwood(gray)-bottom,
White-top/Foam-Green-bottom,
Ivory-top/Sand-bottom &
Burgundy-top/White-bottom.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are individually dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric
that was offered by the boat manufacturer.
Aqualon® is a pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier)
is made by MarChem® CFI in New Haven, MO, USA
using a proprietary process
to coat both the top and bottom,
thus allowing the fabric to be completely reversible.
Water repellect Top Gun™ fabric is characterized by
excellent strength, durability,
tear and abrasion resistance,
dimensional stability, UV and mildew resistance,
and is backed by a
5-year Limited Fabric Warranty.
We offer Top Gun™ in very few applications.
-
Vinyl ...
Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
-
RNR-Marine™ recommends
cleaning your canvas or cover
to maintain its original beauty and increase longevity.
- Covers
are made of a fabric with a weave that can "breathe"
to prevent mold and mildew.
Vinyl or vinyl coated fabric, such as
Weblon®, Stamoid®, Top Gun® or SeaMark® are not
recommended for covers, since the material does not breathe to ventilate the covered space.
We offer covers (depending on boat manufacturer) in one or more of the following fabrics:
-
Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric
is used for
Console-Covers,
OEM Seat-Covers,
OEM Leaning-Post-Covers,
Bow Covers,
Cockpit Covers and
Mooring Covers.
This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant,
and is backed by the
Sunbrella® 10-year Limited Fabric Warranty.
Sunbrella® is the premium cover fabric in our opinion, since it is tough,
breathes and the fabric is woven with solution dyed acrylic fibers,
which last longer than polyester and retain colors extremely well.
Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®,
and is offered for all of our Factory OEM canvas and covers,
as well as our Carver® after-market
Custom-Fit™, Styled-To-Fit™
Boat Covers and Bimini Tops.
-
100% Solution Dyed 9 oz./sq.yd. Polyester fabric
(in Grey, Tan, Navy Blue or Black)
is used for
TTopCovers® T-Top/Hard-Top Boat Covers and
T-Top Center Console Storage Curtains.
Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant,
dimensionally stable (won't sag or stretch) and mildew resistant.
Because the yarn is solution dyed, color fastness is very good.
Top-Notch Elite® is backed by a
5-year Limited Fabric Warranty.
-
100% Solution Dyed 8 oz./sq.yd. Polyester fabric
(in Navy Blue or
Black)
is used for
T-Top Boat Covers and
T-Top Center Console Storage Curtains.
Weathermax-80® is 100% solution dyed polyester
incorporating UV resistant characteristics for long-term color and strength retention
along with excellent breathablity and abrasion resistance.
The HydroMAX® finish raises the bar of hydrostatic performance and
delivers unsurpassed water repellency, mildew and oil resistance
without relying on environmentally unfriendly coating compounds.
WeatherMAX® has
anti-microbial properties
and a minimum UV resistance of 1000 hours
but only weighs 8.0 oz. per square yard
due to the use of a filament rather than a spun yarn like acrylic fabrics.
Excellent for anything from horse blankets to tough outerwear to marine grade tarps.
WeatherMAX® is backed by a
5-year Limited Fabric Warranty.
-
heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric
with a 100% polyurethane finish coating with a
is used for
Carver®
Custom-Fit™, Styled-To-Fit™ Trailerable and
Over-Top Boat Covers,
Universal Seat-Covers and
Universal Leaning-Post Covers.
100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself,
rather than the dye adhering only to the surface of the fibers.
7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear.
Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat.
Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries.
Carver® Sun-DURA® is backed by a
7 Year Limited Warranty.
-
Black Resilience™
is a proprietary tough, black or white stretchy fabric (like Spandex)
with a quadruple coating on the outside to reflect the sun to
keep things cool beneath.
We use Resilience™ on our
T-Top-Storage-Bonnet (1-Year Limited Warranty) and
T-Top-Dry-Stack-Covers (3-Year Limited Warranty).
This is the same fabric made for the US Government to cover fuel storage tanks
in the desert to keep them cool.
The Limited Warrnty on these products includes free repair for any damage
caused by poor workmanship (excludes abuse).
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are indvidualy dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Poly/Cotton Duck ...
50/50 polyester/cotton "Duck" fabric
(from Dutch "doek")
is a heavy, plain woven blended fabric
offering the advantages of both cotton and polyester fibers blended in one fabric.
Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat.
However, as the thickness increases, the breathability decreases.
100% cotton tends to rip and wear out easily, depending on the weave.
Cotton canvas is a very durable and abrasion-resistant fabric,
but it can be very thick and heavy.
Polyester does not breathe, but it is very elastic and
therefore tends to be very tear resistant.
However, it is not as abrasion-resistant as cotton canvas.
Poly/Cotton blend fabrics combine the strengths of the two fibers.
Poly/cotton fabric is breathable, tear-resistant,
and can be fashioned into abrasion-resistant fabrics, like canvas.
We make many older Factory OEM Mooring Covers
(to order) in
Grey
#6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.
-
Vinyl ...
Some of our Factory OEM covers are available in marine grade Vinyl fabric.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
-
open weave vinyl covered polyester "Standard Mesh Solids" fabric
(very breathable) is used on
Gear-Nets and Mesh Windshield-Covers.
Although there are a
wide variety of Phifertex® colors,
most Gear-Nets and Windshield-Covers are Black, Grey or White.
-
Visors, Connectors, Spray-Shields,
Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings
are typically made with a combination of canvas (above) and either:
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl
(often called "Eisenglass" or "Isinglass")
as specified by the boat manufacturer.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
or
-
premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost)
engineered to be ultra clear and resistant to the damaging effects from the sun's rays,
environmental fallout and scratching from handling.
It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC).
Read more about
Strataglass® advantages.
Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick),
40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness.
The 40-mil is available in a clear, light smoke or dark smoke tint,
which is a special order (adds another 10% to the cost and 2 more weeks).
We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore.
Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled.
Strataglass® claims a
5 year life expectancy (care & exposure dependent),
but notes that many yacht owners see 10 or more years of use with proper care.
- RNR-Marine™ recommends
cleaning
and removing all clear-vinyl prior to trailering,
to avoid the harmful efects of rocks, bugs and oils on the vinyl!
Sponsor
|
- Factory Original-Equipment (OEM) Boat Canvas and Covers :
- Canvas & Cover Fabric:
Sunbrella® Marine Fabric
& Colors ...
Weblon® Regatta Fabric & Colors ...
Stamoid® Fabric & Colors ...
Top Gun® Fabric & Colors ...
Canvas/Covers Maintenance & Cleaning ...
Clear-Vinyl & Strataglass® Coated Vinyl Maintenance & Cleaning
- Canvas Types:
Boat Canvas Identification ...
Bimini-Top Canvas ...
T-Top Canvas ...
T-Top Spray-Shield ...
T-Top Gull-Wings ...
more ...
- Canvas Installation Instuctions:
Lacing on T-Top Replacement Canvas ...
T-Top Spray-Shield Installation ...
Bimini/Hard-Top Spray-Shield Installation ...
Side-Curtain Installation ...
Aft-Curtain Installation ...
Installing Male Snap Stud Screws in Aluminum T-Top ...
Drilling holes in Fiberglass for Male Snap Stud Screws ...
- Care:
Canvas Care & Cleaning ...
Eisenglass and Strataglass® Cleaning & Care
- Verifying your Boat:
Hull Identification Numbers (HIN) AFTER Aug 01, 1984 ...
Hull Identification Numbers (HIN) BEFORE Aug 01, 1984 ...
Each of our boat manufacturers' canvas pages
have Photos of the Factory OEM T-Tops, Hard-Top, Bimini-Tops, Canvas, etc. at the
bottom of the page for verification
(Sea Hunt® Photos for example).
Please compare your boat against these photos to insure you have the
Original-Equipment (OEM) Top frame from the Factory
(some dealers, like Chatlee in NC and Ed's Marine Superstoe in VA,
for example,
install their own, after-market T-Tops).
Our Factory OEM canvas
does not fit after-market Tops!
Boston Whaler®, Sea Ray® and Grady White® do NOT allow
dealers to install their own, after-market tops on new boats,
so these are typically Factory OEM,
unless an owner installed their own top.
-
T-Topless™,
Montauk-T-Topless™,
Folding T-Tops
- We sell, DIRECT TO THE PUBLIC, most years (1990s forward depending on boat line - except the two current model years)
Factory Original-Equipment-Manufacturer (OEM) Canvas and Covers
made of Sunbrella®, SeaMark®, Stamoid®, Aqualon®
clear Eisenglass Vinyl and Strataglass® (as specified by boat manufacturer)
created, installed at the factory and originally sold for
- We sell at a discount (and without 6-12% Sales Tax in most states) versus the local dealers
since we "make-to-order" (Just-In-Time = JIT)
using our inventory of 1,000's of patterns
(no need to carry inventory)
and thus our overhead is lower.
- Unfortunately, agreements with boat manufacturers prevent us from selling the current (last 2 model years)
factory-original (OEM) production canvas, frames and covers direct to the public.
Some photos show optional items mounted on standard products.
Descriptive, typographical or photographical errors are subject to correction.
3.16.130.12 ,
|