|
© 2003-2024 |
|
Zodiac®
Futura Mark 2 HD 1995-2006 
TTopCover™ Under T-Top Boat-Cover covers entire boat and motor under T-Top 
Under T-Top Mooring Cover protects Center Console (Electronics and Instruments), Helm Seat(s) (or Leaning Post) and Front Seat... GREAT for mooring in water or storage 
Universal Over T-Top Cover protects T-Top (Hard or Canvas), Center Console (Electronics and Instruments), and Helm Seat(s) (or Leaning Post)... also GREAT for storage or in-water use 
Carver® Styled-To-Fit™ Boat-Cover fits tight enough on the boat (with straps) to be Trailerable 
Sunbrella® Center Console Cover (universal, No T-Top) protects Center Console, Electronics and Instruments 
Leaning-Post Cover (universal) 
Reversible (Flip-Flop or Pilot) Seat Cover (universal) 
|
Home ▶ Zodiac ▶ Zodiac 2 ▶ 1995-2006 Zodiac Futura Mark 2 HD
Zodiac® Futura Mark 2 HD (1995-2006) rigid inflatable boat:
7INF13A- Carver® 7INF13A Styled-To-Fit™ Boat Cover guaranteed to fit 1995-2006 Zodiac® Futura Mark 2 HD - Carver® Styled-To Fit™ boat cover is GUARANTEED TO FIT (Sunbrella / Outdura, SunDURA, PolyGuard or Mossy Oak Camo fabric), Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- UNDER T-Top Mooring Cover - Great for In-Water, Lift, Dry-Stack, Float-Dock or Trailer storage. Easy to install: attaches UNDER the T-Top to completely cover the entire Center Console, Helm Seats (or Leaning-Post) and the Cooler or Seat in front of the Console (measure your Zodiac® Futura Mark 2 HD T-Top for fit) , (click link to pick size) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24.
- OVER T-Top Mooring Cover - Great for In-Water, Lift, Dry-Stack, Float-Dock or Trailer storage. Easy to install: goes OVER the T-Top (Hard ot Canvas) to completely cover the entire T-Top, Center Console and the Helm Seat(s) (or Leaning-Post) (measure your Zodiac® Futura Mark 2 HD T-Top for fit) , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Leaning-Post Cover (universal) - Universal (non-OEM) Cover for many Leaning-Posts , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Center-Console Cover (universal) - Sunbrella® Console Covers (non-OEM) in 3 sizes , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Reversible Seat Cover (universal) - Universal (non-OEM) Reversible-Seat Cover for most Flip-Flop and Reversible Pilot Seats , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Carver® Zippered Folding Top Storage Boot Cover - for Carver® folding Bimini, Sunshade, Camper, Pontoon or Tower Tops when Top is folded and not in use. , (click link to pick size) , Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- TTopCover™ T-Top Boat-Cover - Custom fit (patterned from specific boat model) cover attaches beneath T-Top (Center-Console) or Hard-Top to cover entire boat and motor , varies $754 to $4,511 (Email for price) , Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24.
Canvas, Covers and Tops are all custom made-to-order and typically ship in 2-11 weeks
(check your cart for actual lead time).
(check your cart for actual lead time).
Zodiac®: French diver Jacques-Yves Cousteau began using the first Zodiac® (the French aircraft manufacturer) Rigid Inflatable Boat (RIB) in 1952 after the boat was developed and powered across the Atlantic Ocean by French Navy officer and biologist Alain Bombard.
Additional Shade for Zodiac® boats : When its hot you can never have enough shade. Our Boat Shade Kits (starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale)) extend shade over the cockpit or bow (can even be used like a Spray-Dodger) and can be put up or taken down in minutes.
Folding T-Tops to fit Zodiac® boats: Our T-Topless™ folding T-Top` fits most Zodiac® Medline, Pro, Yachtline and Hurricane windshield grab rail equipped boats. This top lowers (or removes) in less than 15 minutes to store your boat in your own garage or storage building/shed, potentially saving $1,000's per year in storage costs (or let you pass under a low bridge). The T-Topless™ folding T-Top is made of solid, yet lightweight, 1-inch diameter welded 316 Stainless Steel tubing with Sunbrella® canvas and install in an hour on the Stainless Steel windshield grab rails of Zodiac® center console boats.
Covers for Zodiac® boats : We offer
Custom After-Market Covers for Zodiac® boats : We also offer after-market Carver® Custom-Fit™ Boat Covers (from $239), Styled-To-Fit™Boat Covers (from $229) and in Sunbrella® marine fabric (the best quality, breathable fabric for covers) as well as some excellent high-quality, but less expensive materials, that are designed as a precise fit using measurements taken from your particular model of outboard motor.
Zodiac® Boat Resources:
- The Zodiac® web-site is at https://ZodiacMarineUSA.com
- Older, archived copy years of the Zodiac® web-site may possibly be available on the Web.Archive.Org "Way Back" Time Machine, found at Web.Archive.Org Zodiac Archives (this site is a lot of fun, and you can often find original specs, photos and brochures for your boat)
- Owners of Zodiac® boats can share information with other owners at RIB.net/Forum
- Links to FREE Outboard Motor Manuals and Owners Guides can be found at RNR-Marine.com/Boat-Motor-Transmission-Manuals.shtml
Factory OEM and After-Market Canvas
-
>
- Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas
that has been sitting on the shelf for years.
- We make Brand New Canvas Made TO ORDER using
the original factory OEM patterns
and the following material choices:
- Marine Canvas choices
(dependent on fabric offered by original boat manufacturer):
-
9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric
is a tough, water repellent (Fluorocarbon coated), UV resistant,
color-fast (the acrylic fiber is dyed before the fabric is woven),
breathable (will help keep things dry) woven fabric,
manufactured by Glen Raven Mills in Anderson, SC, USA.
Sunbrella® is available in a
wide variety of colors.
The name Sunbrella® is synonymous with the finest outdoor fabric in the world.
Sunbrella® withstands sun, wind, and rain while remaining beautiful for years
and is backed by a
10-year Limited Fabric Warranty.
The water repellency of Sunbrella® can be improved by
cleaning and applying
"303 High Tech Fabric Guard" periodically.
Sunbrella® was offered from the Factory for the OEM Canvas
we make for most boat manufacturers, including:
Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®,
Rinker®, Larson®, Grady White®, Regal® and many more.
RNR-Marine™ offers all
"Sunbrella® Marine Top Fabric" colors
(boat dealers may only have black), including popular
Black,
Captain Navy,
Marine Blue,
Mediterranean Blue Tweed,
Pacific Blue,
Forest Green,
Logo Red,
Jockey Red,
Dubonnet Tweed,
Linen,
Linen Tweed,
Toast Tweed,
Silver,
Beige and many more.
To insure consistencey and avoid mis-matches, the factory original colors
may only be offered for many boat manufcaturers.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof Sunbrella®,
developed by
Haartz® engineers who have expertly waterproofed Sunbrella®,
the premier woven acrylic fabric, by
undercoating the Sunbrella® fabric with a textured marine grade vinyl.
SeaMark® offers the best of both worlds -
a beautiful, colorfast fabric with the added durability of vinyl.
This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength,
backed by a 5-year manufacturer's warranty, and is available in
many Sunbrella® solid and tweed colors.
SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas
on many
Sea Ray®,
Boston Whaler®,
Formula®, Chaparral®, Rinker® and Regal®
convertible, bimini, sunshade and camper tops
for example.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof PVC coated, polyester reinforced vinyl "Top" fabric
is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric,
backed by a
5-year Limited Fabric Warranty.
Although Stamoid® is made in a
variety of colors, we typically offer only white (Ivory for Grady White®),
as used on many yachts.
-
Some of our Factory OEM canvas was offered in
Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric
manufactured by Recasens® USA.
as selected by the boat manufacturer.
Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric
for marine and outdoor use.
It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance
and is woven in
over 50 solid colors
and over 80 stripes,
although only a limited selection of solid colors are offered for our marine canvas.
In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers,
and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.
-
(Herculite®)
Regatta® vinyl-laminated polyester yacht fabric
is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric,
backed by a
5-year Limited Fabric Warranty.
We offer Weblon® in
ANY "Weblon® Yacht Fabric" color:
White,
Ivory,
Black,
White-top/Mist-Blue-bottom,
White-top/Driftwood(gray)-bottom,
White-top/Foam-Green-bottom,
Ivory-top/Sand-bottom &
Burgundy-top/White-bottom.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are individually dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric
that was offered by the boat manufacturer.
Aqualon® is a pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier)
is made by MarChem® CFI in New Haven, MO, USA
using a proprietary process
to coat both the top and bottom,
thus allowing the fabric to be completely reversible.
Water repellect Top Gun™ fabric is characterized by
excellent strength, durability,
tear and abrasion resistance,
dimensional stability, UV and mildew resistance,
and is backed by a
5-year Limited Fabric Warranty.
We offer Top Gun™ in very few applications.
-
Vinyl ...
Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
- RNR-Marine™ recommends cleaning your canvas or cover to maintain its original beauty and increase longevity.
-
- Covers
are made of a fabric with a weave that can "breathe"
to prevent mold and mildew.
Vinyl or vinyl coated fabric, such as
Weblon®, Stamoid®, Top Gun® or SeaMark® are not
recommended for covers, since the material does not breathe to ventilate the covered space.
We offer covers (depending on boat manufacturer) in one or more of the following fabrics:
-
Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric
is used for
Console-Covers,
OEM Seat-Covers,
OEM Leaning-Post-Covers,
Bow Covers,
Cockpit Covers and
Mooring Covers.
This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant,
and is backed by the
Sunbrella® 10-year Limited Fabric Warranty.
Sunbrella® is the premium cover fabric in our opinion, since it is tough,
breathes and the fabric is woven with solution dyed acrylic fibers,
which last longer than polyester and retain colors extremely well.
Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®,
and is offered for all of our Factory OEM canvas and covers,
as well as our Carver® after-market
Custom-Fit™, Styled-To-Fit™
Boat Covers and Bimini Tops.
-
100% Solution Dyed 9 oz./sq.yd. Polyester fabric
(in Grey, Tan, Navy Blue or Black)
is used for
TTopCovers® T-Top/Hard-Top Boat Covers and
T-Top Center Console Storage Curtains.
Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant,
dimensionally stable (won't sag or stretch) and mildew resistant.
Because the yarn is solution dyed, color fastness is very good.
Top-Notch Elite® is backed by a
5-year Limited Fabric Warranty.
-
100% Solution Dyed 8 oz./sq.yd. Polyester fabric
(in Navy Blue or
Black)
is used for
T-Top Boat Covers and
T-Top Center Console Storage Curtains.
Weathermax-80® is 100% solution dyed polyester
incorporating UV resistant characteristics for long-term color and strength retention
along with excellent breathablity and abrasion resistance.
The HydroMAX® finish raises the bar of hydrostatic performance and
delivers unsurpassed water repellency, mildew and oil resistance
without relying on environmentally unfriendly coating compounds.
WeatherMAX® has
anti-microbial properties
and a minimum UV resistance of 1000 hours
but only weighs 8.0 oz. per square yard
due to the use of a filament rather than a spun yarn like acrylic fabrics.
Excellent for anything from horse blankets to tough outerwear to marine grade tarps.
WeatherMAX® is backed by a
5-year Limited Fabric Warranty.
-
heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric
with a 100% polyurethane finish coating with a
is used for
Carver®
Custom-Fit™, Styled-To-Fit™ Trailerable and
Over-Top Boat Covers,
Universal Seat-Covers and
Universal Leaning-Post Covers.
100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself,
rather than the dye adhering only to the surface of the fibers.
7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear.
Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat.
Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries.
Carver® Sun-DURA® is backed by a
7 Year Limited Warranty.
-
Black Resilience™
is a proprietary tough, black or white stretchy fabric (like Spandex)
with a quadruple coating on the outside to reflect the sun to
keep things cool beneath.
We use Resilience™ on our
T-Top-Storage-Bonnet (1-Year Limited Warranty) and
T-Top-Dry-Stack-Covers (3-Year Limited Warranty).
This is the same fabric made for the US Government to cover fuel storage tanks
in the desert to keep them cool.
The Limited Warrnty on these products includes free repair for any damage
caused by poor workmanship (excludes abuse).
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are indvidualy dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Poly/Cotton Duck ...
50/50 polyester/cotton "Duck" fabric
(from Dutch "doek")
is a heavy, plain woven blended fabric
offering the advantages of both cotton and polyester fibers blended in one fabric.
Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat.
However, as the thickness increases, the breathability decreases.
100% cotton tends to rip and wear out easily, depending on the weave.
Cotton canvas is a very durable and abrasion-resistant fabric,
but it can be very thick and heavy.
Polyester does not breathe, but it is very elastic and
therefore tends to be very tear resistant.
However, it is not as abrasion-resistant as cotton canvas.
Poly/Cotton blend fabrics combine the strengths of the two fibers.
Poly/cotton fabric is breathable, tear-resistant,
and can be fashioned into abrasion-resistant fabrics, like canvas.
We make many older Factory OEM Mooring Covers
(to order) in
Grey
#6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.
- Vinyl ... Some of our Factory OEM covers are available in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
-
-
open weave vinyl covered polyester "Standard Mesh Solids" fabric
(very breathable) is used on
Gear-Nets and Mesh Windshield-Covers.
Although there are a
wide variety of Phifertex® colors,
most Gear-Nets and Windshield-Covers are Black, Grey or White.
-
Visors, Connectors, Spray-Shields,
Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings
are typically made with a combination of canvas (above) and either:
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl
(often called "Eisenglass" or "Isinglass")
as specified by the boat manufacturer.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
or
-
premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost)
engineered to be ultra clear and resistant to the damaging effects from the sun's rays,
environmental fallout and scratching from handling.
It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC).
Read more about
Strataglass® advantages.
Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick),
40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness.
The 40-mil is available in a clear, light smoke or dark smoke tint,
which is a special order (adds another 10% to the cost and 2 more weeks).
We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore.
Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled.
Strataglass® claims a
5 year life expectancy (care & exposure dependent),
but notes that many yacht owners see 10 or more years of use with proper care.
- RNR-Marine™ recommends cleaning and removing all clear-vinyl prior to trailering, to avoid the harmful efects of rocks, bugs and oils on the vinyl!
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl
(often called "Eisenglass" or "Isinglass")
as specified by the boat manufacturer.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
is a tough, water repellent (Fluorocarbon coated), UV resistant,
color-fast (the acrylic fiber is dyed before the fabric is woven),
breathable (will help keep things dry) woven fabric,
manufactured by Glen Raven Mills in Anderson, SC, USA.
Sunbrella® is available in a
Sponsor |
Some photos show optional items mounted on standard products.
Descriptive, typographical or photographical errors are subject to correction.
3.22.70.169 ,
|
