1970-2021 Mariah® Davanti 241 Factory Original (OEM) Canvas & Covers, Bimini-Tops and Boat or PWC Covers

Mariah®: We regret to inform you that, as of Fall 2013, we no longer carry (and there is no longer ANY source) for Factory Original-Equipment canvas for Mariah® boats. We do offer many Custom-Fit boat covers for many Mariah® models.. The popular Mariah® boat line was manufactured from 1990-2012. Our team patterned and manufactured all of the Factory Original-Equipment (OE) canvas and covers for Sea Fox®, Inc. (2002-2012) when they bought Mariah® boat manufacturing in 2002. We have all of the original OEM canvas patterns for all 'Sea-Fox® era' (2002-2012) factory canvas (even those pieces not listed).

2001 and older Mariahs: We do not have the older 1990-2001 (pre Sea-Fox) patterns (yet), however ... we made the Factory OEM canvas for Sea Fox® after they bought Mariah® (2002+), not the "original" (2001 and older) Mariah® boats (that canvas was patterned and made by another, unknown manufacturer). Sea Fox® renamed all of the Mariah® boat models in 2002, and we patterned all new canvas for them in 2002. Few changes were made in 2002-2003 from the 1999-2001 hulls and windshield, so the canvas from the comparable 2002 model boat may ft your 1999-2001 Mariah®. We have several customers who have had success doing this. Please check below (photos, etc.) to see what your boat model was renamed to in 2002. A few caveats:

YES (No Longer as of 2014) for 2001 and older Mariahs:
1. You can successfully install a new 2002/2003 bimini or convertible top complete with frame, and add a new spray-shield, side curtains, aft curtains and camper. You will need to verify your boat versus the 2002/2003 model.
2. You can successfully install a new 2002/2003 cockpit or bow cover on a comparable 1999-2001 boat that has no snaps already installed on the fiberglass.
3. We are unable to confirm that the windshields were the exact same from 1999/2000/2001 to 2002, so your old canvas will be need to be verified to our pattern (just send it in - shipping is less than $10) for cockpit covers, bimini-spray-shields and convertible tops. We have successfully used the 2002 SC22 convertible canvas on a 2001 Shabah 222 for example, so many of the windshields are identical.
4. We have Boat Covers for all years of Mariahs: http://RNR-Marine.com/MARIAH.shtml#products
NO for 2001 and older Mariahs:
1. We would not recommend using a newer cockpit or bow cover on a boat that already had a cover, since there is little/no chance that the snaps would be in the same locations (from the prior canvas maker to our 2002 design). We can ship without snaps in the canvas, but there is also the real possibility that our new canvas may not even cover out to where the old snaps are located.
2. You can't mix older (2001-) biminis/frames with our new (2002) spray-shields, side curtains or aft-curtains.

The popular and extermely active Mariah® Owners Club is full of information from Classic and Sea-Fox-era Mariah® owners, including listings of most OEM parts for Mariah® boats.

Factory Original-Equipment-Manufacturer (OEM) Canvas for Mariah® boats: Our team patterned and manufactured the Factory Original-Equipment-Manufacturer (OEM) canvas for Mariah® all Sea Fox mfgd. bow rider, deck and cuddy cabin boats from 2003 to 2012.

We produce new canvas (diagram explaining what each piece of canvas is called) in Black, Captain Navy, Silver or Linen Sunbrella fabric. We often offer ANY color Sunbrella to match your personal taste (these colors may not be available from the dealer). Note: We no longer carry Mariah® OEM canvas as of Fall 2013, so please contact your local Mariah® dealer. Windows are made with 30mil clear vinyl window material. Specifications, care and cleaning of Sunbrella , 30mil clear vinyl and other canvas materials are detailed below. In some cases (if the boat mfgr is out of business for example) you can upgrade the windows to Strataglass coated clear vinyl (approx. 50-60 percent more cost), however the standard Eisenglass (clear vinyl) will last for many years with proper care, cleaning and storage. We utilize our library of 1,000's of patterns to produce new, "made-to-order" Factory Original canvas for your Mariah® boat. This is the same canvas originally offered from the Mariah® Factory and sold by your local Mariah® dealer (local dealers may only go back 5 years or so however, and charge local sales tax, which we do not charge except in SC and FL). No other canvas manufacturer has these patterns or the ability to produce the exact factory Original Equipment Manufacturer (OEM) replacement canvas and covers that were offered from the Mariah® Factory when your boat was new.

Please be sure that you have the Factory Mariah® frame or matching canvas.

Size #10 (5 teeth/inch) and #8 (6 teeth/inch) zipper comparison and measurement
There are no cancellations, refunds or returns on Factory OEM canvas, since it is all "made-to-order" for you. Some owners (and even dealers, when new) installed their own "after-market" Bimini Tops, T-Tops, Hard-Tops and Canvas, so please:

Compare your canvas or frame to the Mariah® factory OEM photos shown here,
Check for "Atlantic Coast" "Atlantic Coast" tags with Mariah® OEM part numbers on existing canvas,
Verify that your existing canvas has # 8 gauge zippers (factory original-equipment Mariah® OEM zipper size):
- #8 gauge zippers have 6 teeth per inch and will NOT zip to #10 zippers,
- #10 gauge zippers have 5 teeth per inch and will NOT zip to #8 zippers,
- See zipper size comparison photo at right,
- Please note that after-market canvas makers often use the large #10 gauge zippers.
- The zipper gauge size is actually the height of the teeth, 8mm or 10mm tall for example. (#8 has 8mm tall teeth and #10 is 10mm tall for example). Since it is very difficult to measure the zipper tooth height, the easiest way to measure zipper size is to count the number of teeth over 2 inches: a #8 zipper has 12 teeth over 2 inches and a #10 zipper has 10 teeth over 2 inches.

Since Mariah® is no longer in business and there are no longer any Mariah® dealers, RNR-Marine™ may be your only source for new (not new-old-stock) Factory Original-Equipment-Manufacturer (OEM) canvas and covers.

Additional Shade for Mariah® boats : When its hot you can never have enough shade. Our Boat Shade Kits (starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale)) extend shade over the cockpit or bow (can even be used like a Spray-Dodger) and can be put up or taken down in minutes.

Factory Original-Equipment (OEM) Covers for Mariah® boats : We offer Factory OEM Cockpit, Bow and Mooring Covers (typically in durable Sunbrella®) to fit your Mariah® boat perfectly.

Custom After-Market Covers for Mariah® boats : We also offer after-market Carver® Custom-Fit™ Boat Covers (from $239), Styled-To-Fit™Boat Covers (from $229) and in Sunbrella® marine fabric (the best quality, breathable fabric for covers) as well as some excellent high-quality, but less expensive materials, that are designed as a precise fit using measurements taken from your particular model of outboard motor.

Mariah® Boat Resources:

Even though Mariah® is no longer in business, online archives of many instances of the Mariah® web-site going back several years can still be found at https://web.archive.org/web/*/http://MariahBoats.com
Owners of Mariah® boats can share information with other owners at MariahOwnersClub.com

Factory OEM and After-Market Canvas

Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas that has been sitting on the shelf for years.
We make Brand New Canvas Made TO ORDER using the original factory OEM patterns and the following material choices:
Marine Canvas choices (dependent on fabric offered by original boat manufacturer):
- 9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric is a tough, water repellent (Fluorocarbon coated), UV resistant, color-fast (the acrylic fiber is dyed before the fabric is woven), breathable (will help keep things dry) woven fabric, manufactured by Glen Raven Mills in Anderson, SC, USA. Sunbrella® is available in a wide variety of colors. The name Sunbrella® is synonymous with the finest outdoor fabric in the world. Sunbrella® withstands sun, wind, and rain while remaining beautiful for years and is backed by a 10-year Limited Fabric Warranty. The water repellency of Sunbrella® can be improved by cleaning and applying "303 High Tech Fabric Guard" periodically. Sunbrella® was offered from the Factory for the OEM Canvas we make for most boat manufacturers, including: Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®, Rinker®, Larson®, Grady White®, Regal® and many more. RNR-Marine™ offers all "Sunbrella® Marine Top Fabric" colors (boat dealers may only have black), including popular Black, Captain Navy, Marine Blue, Mediterranean Blue Tweed, Pacific Blue, Forest Green, Logo Red, Jockey Red, Dubonnet Tweed, Linen, Linen Tweed, Toast Tweed, Silver, Beige and many more. To insure consistencey and avoid mis-matches, the factory original colors may only be offered for many boat manufcaturers. Colors will appear differently on your monitor than the actual fabric application.
- waterproof Sunbrella®, developed by Haartz® engineers who have expertly waterproofed Sunbrella®, the premier woven acrylic fabric, by undercoating the Sunbrella® fabric with a textured marine grade vinyl. SeaMark® offers the best of both worlds - a beautiful, colorfast fabric with the added durability of vinyl. This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength, backed by a 5-year manufacturer's warranty, and is available in many Sunbrella® solid and tweed colors. SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas on many Sea Ray®, Boston Whaler®, Formula®, Chaparral®, Rinker® and Regal® convertible, bimini, sunshade and camper tops for example. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.
- waterproof PVC coated, polyester reinforced vinyl "Top" fabric is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric, backed by a 5-year Limited Fabric Warranty. Although Stamoid® is made in a variety of colors, we typically offer only white (Ivory for Grady White®), as used on many yachts.
- Some of our Factory OEM canvas was offered in Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric manufactured by Recasens® USA. as selected by the boat manufacturer. Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric for marine and outdoor use. It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance and is woven in over 50 solid colors and over 80 stripes, although only a limited selection of solid colors are offered for our marine canvas. In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers, and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.
- (Herculite®) Regatta® vinyl-laminated polyester yacht fabric is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric, backed by a 5-year Limited Fabric Warranty. We offer Weblon® in ANY "Weblon® Yacht Fabric" color: White, Ivory, Black, White-top/Mist-Blue-bottom, White-top/Driftwood(gray)-bottom, White-top/Foam-Green-bottom, Ivory-top/Sand-bottom & Burgundy-top/White-bottom. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.
- Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are individually dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
- Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric that was offered by the boat manufacturer. Aqualon® is a pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
- acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier) is made by MarChem® CFI in New Haven, MO, USA using a proprietary process to coat both the top and bottom, thus allowing the fabric to be completely reversible. Water repellect Top Gun™ fabric is characterized by excellent strength, durability, tear and abrasion resistance, dimensional stability, UV and mildew resistance, and is backed by a 5-year Limited Fabric Warranty. We offer Top Gun™ in very few applications.
- Vinyl ... Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
- RNR-Marine™ recommends cleaning your canvas or cover to maintain its original beauty and increase longevity.
Covers are made of a fabric with a weave that can "breathe" to prevent mold and mildew. Vinyl or vinyl coated fabric, such as Weblon®, Stamoid®, Top Gun® or SeaMark® are not recommended for covers, since the material does not breathe to ventilate the covered space. We offer covers (depending on boat manufacturer) in one or more of the following fabrics:
- Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric is used for Console-Covers, OEM Seat-Covers, OEM Leaning-Post-Covers, Bow Covers, Cockpit Covers and Mooring Covers. This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant, and is backed by the Sunbrella® 10-year Limited Fabric Warranty. Sunbrella® is the premium cover fabric in our opinion, since it is tough, breathes and the fabric is woven with solution dyed acrylic fibers, which last longer than polyester and retain colors extremely well. Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®, and is offered for all of our Factory OEM canvas and covers, as well as our Carver® after-market Custom-Fit™, Styled-To-Fit™ Boat Covers and Bimini Tops.
- 100% Solution Dyed 9 oz./sq.yd. Polyester fabric (in Grey, Tan, Navy Blue or Black) is used for TTopCovers® T-Top/Hard-Top Boat Covers and T-Top Center Console Storage Curtains. Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant, dimensionally stable (won't sag or stretch) and mildew resistant. Because the yarn is solution dyed, color fastness is very good. Top-Notch Elite® is backed by a 5-year Limited Fabric Warranty.
- 100% Solution Dyed 8 oz./sq.yd. Polyester fabric (in Navy Blue or Black) is used for T-Top Boat Covers and T-Top Center Console Storage Curtains. Weathermax-80® is 100% solution dyed polyester incorporating UV resistant characteristics for long-term color and strength retention along with excellent breathablity and abrasion resistance. The HydroMAX® finish raises the bar of hydrostatic performance and delivers unsurpassed water repellency, mildew and oil resistance without relying on environmentally unfriendly coating compounds. WeatherMAX® has anti-microbial properties and a minimum UV resistance of 1000 hours but only weighs 8.0 oz. per square yard due to the use of a filament rather than a spun yarn like acrylic fabrics. Excellent for anything from horse blankets to tough outerwear to marine grade tarps. WeatherMAX® is backed by a 5-year Limited Fabric Warranty.
- heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric with a 100% polyurethane finish coating with a is used for Carver® Custom-Fit™, Styled-To-Fit™ Trailerable and Over-Top Boat Covers, Universal Seat-Covers and Universal Leaning-Post Covers. 100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries. Carver® Sun-DURA® is backed by a 7 Year Limited Warranty.
- Black Resilience™ is a proprietary tough, black or white stretchy fabric (like Spandex) with a quadruple coating on the outside to reflect the sun to keep things cool beneath. We use Resilience™ on our T-Top-Storage-Bonnet (1-Year Limited Warranty) and T-Top-Dry-Stack-Covers (3-Year Limited Warranty). This is the same fabric made for the US Government to cover fuel storage tanks in the desert to keep them cool. The Limited Warrnty on these products includes free repair for any damage caused by poor workmanship (excludes abuse).
- Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are indvidualy dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
- Poly/Cotton Duck ... 50/50 polyester/cotton "Duck" fabric (from Dutch "doek") is a heavy, plain woven blended fabric offering the advantages of both cotton and polyester fibers blended in one fabric. Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat. However, as the thickness increases, the breathability decreases. 100% cotton tends to rip and wear out easily, depending on the weave. Cotton canvas is a very durable and abrasion-resistant fabric, but it can be very thick and heavy. Polyester does not breathe, but it is very elastic and therefore tends to be very tear resistant. However, it is not as abrasion-resistant as cotton canvas. Poly/Cotton blend fabrics combine the strengths of the two fibers. Poly/cotton fabric is breathable, tear-resistant, and can be fashioned into abrasion-resistant fabrics, like canvas. We make many older Factory OEM Mooring Covers (to order) in Grey #6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.
- Vinyl ... Some of our Factory OEM covers are available in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
open weave vinyl covered polyester "Standard Mesh Solids" fabric (very breathable) is used on Gear-Nets and Mesh Windshield-Covers. Although there are a wide variety of Phifertex® colors, most Gear-Nets and Windshield-Covers are Black, Grey or White.
Visors, Connectors, Spray-Shields, Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings are typically made with a combination of canvas (above) and either:
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl (often called "Eisenglass" or "Isinglass") as specified by the boat manufacturer. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
  
  or
- premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost) engineered to be ultra clear and resistant to the damaging effects from the sun's rays, environmental fallout and scratching from handling. It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC). Read more about Strataglass® advantages. Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick), 40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness. The 40-mil is available in a clear, light smoke or dark smoke tint, which is a special order (adds another 10% to the cost and 2 more weeks). We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore. Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled. Strataglass® claims a 5 year life expectancy (care & exposure dependent), but notes that many yacht owners see 10 or more years of use with proper care.
- RNR-Marine™ recommends cleaning and removing all clear-vinyl prior to trailering, to avoid the harmful efects of rocks, bugs and oils on the vinyl!