Follow RNRMarine™ on Twitter® Logo Image RNR-Marine™ on YouTube® Image See RNR-Marine-Inc.™ on LinkedIn® Image
To find factory OEM & custom fit canvas, tops, covers & carpet, enter:
Manufacturer:
Boat Model
:
RNR-Marine™, Inc. has Factory (OEM) Canvas, Cover and Tops and after-market covers for Chaparral, Formula, Rinker, Larson, Glastron, Crownline, Robalo, Trophy, SeaSwirl, Wellcraft boats and manufactures the T-Topless™ & Montauk-T-Topless™ folding and removable tops for center console boats.
© 2003-2024
 
10/25/24 RnR Marine™ Status:

Covers and Carpet
  New, Factory OEM OVERSTOCK (Save 25-75%): OVERSTOCK for:
    Sea Ray, Whaler, Regal, Malibu, Mastercraft & Cobalt
OVERSTOCK for:
    Chaparral, Rinker, Larson, Formula, Robalo & Trophy

  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Canvas, Curtains, Frames and Covers...

TTopCover™ Under T-Top or Hard-Top Boat Cover Carver® Over T-Top or Hard-Top Boat Cover Under T-Top Mooring/Storage Curtains Over T-Top Mooring/Storage Curtains Carver® Custom-Fit™ Trailerable Boat Covers for 1,800+ boats Carver® Styled-To-Fit™ Trailerable Boat Covers for 15,000+ boats Carver® Center Console Boat Covers LaPortes® Center, Dual Console & Flats Boat Covers Laportes® Custom Trailerable, Center Console (No T-Top) Boat Covers Carver® Under Wakeboard-Tower Boat Covers Carver® Over Wakeboard-Tower Boat Covers Carver® Flats-Boat with Poling-Platform Covers Universal Console Covers, No T-Top Universal Leaning-Post Covers Universal Reversible (Flip-Flop) Seat Covers Snap-In-Carpet™ Mat Set   Motorcycle covers (Winter 2021)
  Snowmobile covers (Winter 2021)
  Golf Cart covers (Winter 2021)
  ATV covers (Winter 2021)
  UTV covers (Winter 2021)
  Sport UTV covers (Winter 2021)
  Snowmobile covers (Winter 2021)
  RV covers (Winter 2021)
  Carver® PWC covers (Winter 2021)
  Kayak covers (Winter 2021)
  Canoe covers (Winter 2021)

  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Bow, Cockpit, Mooring, Top, Seat and Dash Covers...

TRACK your RNR-Marine™ Order
Tops
Measure Center Console Boat for T-Topless™ or Montauk-T-Topless™ T-TOP Stretchy Shade Extension Kits for center console boat's Bow or Aft Cockpit T-Shade™ Rigid Shade Extension Kits for center console boat Cockpit HARD-TOP Shade Extension Kits for Walk-Around, Express or Dual Console boats BIMINI Shade Extension Kits for most Bimini Tops Carver® Aluminum Bimini Top (UnAssembled) Carver® Stainless Bimini Top (UnAssembled) Carver® Stainless Sunbrella® Bimini Top (Assembled) Carver® Pontoon Bimini Top Carver® Under Wake Tower Top NEW! Fishini™ Bimini-Top Replacement 3 Round Bow Carver® Bimini-Top Canvas & Boots Replacement 4 Round Bow Carver® Bimini-Top Canvas & Boots Carver® Replacement Pontoon Top Canvas & Boots (with Light Cutouts) Carver® Zippered Sunbrella® Bimini Boot Cover
  Please SEARCH by boat Model at the top of the page for  
      factory Original Equipment Manufacturer (OEM)
      Tops, Frames, Canvas and Covers...

T-Tops Comparison Compare to the Competition
T-Topless™ folding T-Top photos & images Montauk-T-Topless™ folding T-Top photos & images Shadow™ folding T-Top kit photos & images Montauk-Shadow™ folding T-Top kit photos & images TTopCovers™ T-Top boat cover photos Videos TRACK your RNR-Marine™ Order
Customer Service
Moomba®
RNR-Marine^&trade^; Sunbrella^®^;, Weblon^®^;, Stamoid^®^;, Phifertex^®^; ^&^; Strataglass^®^;

Boat Canvas Identification
Factory OEM
Boat Canvas Identification


Carver Custom-Fit Boat Covers for Moomba boats
Carver® Custom-Fit™ Boat Covers



Carver Styled-To-Fit Boat Covers for Moomba boats
Carver® Styled-To-Fit-Fit™ Boat Covers


RNR-Marine™ utilizes Sunbrella® fabric on Moomba boats' OEM canvas
Offered in Sunbrella® fabric


Moomba, Outback V, 2007, Cockpit Cover, Bow Cover, stbd front
Moomba™ Factory Original-Equipment-Manufacturer (OEM) Canvas: Moomba, Outback V, 2007, Cockpit Cover, Bow Cover, stbd front shown here.

Boat Shade Kit
($524.00 , SALE PRICE: $487.32 (End of Summer Sale) to $684.00 , SALE PRICE: $636.12 (End of Summer Sale)) for cockpit or bow of any Moomba® boat

Moomba® Boats
Factory Original (OEM) Canvas & Covers, Bimini-Tops and Boat or PWC Covers

Canvas, Covers and Tops are all custom made-to-order and typically ship in 2-11 weeks
(check your cart for actual lead time).


Select your boat from the list below (scroll bar is on the far right) or click for details about Moomba® canvas and covers:
  1. Moomba® Outback (2001 - 2002): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  2. Moomba® Outback (2003 - 2007): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  3. Moomba® Outback (2008 - 2013): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  4. Moomba® Kamberra (2001 - 2003): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  5. Moomba® Kamberra Walkabout (2001 - 2003): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  6. Moomba® Mobius (2001 - 2002): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  7. Moomba® Mobius (2004): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  8. Moomba® Mobius LS (2006 - 2008): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  9. Moomba® Mobius LS (2009 - 2010): Bimini-Top/Boot, Shade Kit
  10. Moomba® Mobius LSV (2006 - 2007): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  11. Moomba® Mobius LSV (2008 - 2015): Bimini-Top/Boot, Shade Kit
  12. Moomba® Mobius V (2001 - 2003): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  13. Moomba® Mobius XLV (2005 - 2006): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  14. Moomba® Mobius XLV (2008): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Bimini-Top/Boot, Shade Kit
  15. Moomba® Outback LS (2001 - 2010): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  16. Moomba® Outback LSV (2001 - 2015): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  17. Moomba® Outback V (2005 - 2015): Factory Original Equipment Mfr. (OEM) Canvas & Covers, Shade Kit
  18. Moomba® Mojo 2.5, with OZ Tower and Swim Platform (2012 - 2014): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  19. Moomba® Boomerang, No Tower, No Swim Platform (1993 - 2001): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  20. Moomba® Boomerang, without Swim Platform, No Tower (1997 - 2001): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  21. Moomba® Craz, with A3 Tower and Swim Platform (2017 - 2020): Custom Fit™ Boat Cover, Bimini-Top/Boot
  22. Moomba® Craz, with Aviator (tm) Tower and Swim Platform (2016): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  23. Moomba® Gravity XLV, without Swim Platform, No Tower (2006): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  24. Moomba® Helix, with Aviator Tower and Swim Platform and Swim Platform (2017 - 2018): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  25. Moomba® Kamberra Walkabout, without Swim Platform, No Tower (2001 - 2002): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  26. Moomba® Kamberra, without Swim Platform, No Tower (2001 - 2002): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  27. Moomba® Kanga, No Tower, No Swim Platform (1997 - 2001): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  28. Moomba® Kanga, without Swim Platform, No Tower (1997 - 2001): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  29. Moomba® Kanga, with Swim Platform, No Tower (1997 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  30. Moomba® Mobius LSV, with Factory 2-Leg per Side Rad-A-Cage (tm) Tower, NO Swim Platform (2009 - 2011): Custom Fit™ Boat Cover, Bimini-Top/Boot
  31. Moomba® Mobius LSV, with Factory 3-Leg per Side Tower, with Swim Platform (2002 - 2005): Custom Fit™ Boat Cover, Bimini-Top/Boot
  32. Moomba® Mobius LSV, without Swim Platform, No Tower (2002 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  33. Moomba® Mobius LSV, without Swim Platform, No Tower (2006): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  34. Moomba® Mobius LSV, with OZ Tower and Swim Platform (2012 - 2015): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  35. Moomba® Mobius LSV, with Swim Platform, No Tower (2002 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  36. Moomba® Mobius LSV, with Swim Platform, No Tower (2006 - 2009): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  37. Moomba® Mobius LSV, with V-2 Tower and Swim Platform and Swim Platform (2011 - 2012): Custom Fit™ Boat Cover, Bimini-Top/Boot
  38. Moomba® Mobius LSV, with V-2 Tower, without Swim Platform (2011 - 2012): Custom Fit™ Boat Cover, Bimini-Top/Boot
  39. Moomba® Mobius LS, with Factory 3-Leg per Side Tower, with Swim Platform (2002 - 2005): Custom Fit™ Boat Cover, Bimini-Top/Boot
  40. Moomba® Mobius LS, without Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  41. Moomba® Mobius LS, without Swim Platform, No Tower (2006): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  42. Moomba® Mobius LS, with Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  43. Moomba® Mobius LS, with Swim Platform, No Tower (2006 - 2009): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  44. Moomba® Mobius, No Tower, with Swim Platform (1999): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  45. Moomba® Mobius, with Factory Rad-A-Cage Tower Upright, with Swim Platform (1999): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  46. Moomba® Mobius, without Swim Platform, No Tower (2000 - 2003): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  47. Moomba® Mobius, with Swim Platform, No Tower (1999): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  48. Moomba® Mobius, with Swim Platform, No Tower (2000 - 2003): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  49. Moomba® Mobius XLV, with Factory Wakeboard Tower and Extended Swim Platform (2008 - 2011): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  50. Moomba® Mobius XLV, with Factory Wakeboard Tower, No Swim Platform (2008 - 2011): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  51. Moomba® Mobius XLV, without Swim Platform, No Tower (2004 - 2006): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  52. Moomba® Mojo, with A3 Tower and Swim Platform (2017 - 2020): Custom Fit™ Boat Cover, Bimini-Top/Boot
  53. Moomba® Mojo, with Aviator (tm) or S-Bend Tower and Swim Platform (2016 - 2017): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  54. Moomba® Mondo, with OZ HD Tower and Swim Platform (2014 - 2015): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  55. Moomba® Mondo, with OZ HD Tower and Swim Platform (2014 - 2015): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  56. Moomba® Outback-LS, No Tower, No Swim Platform (1997 - 2001): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  57. Moomba® Outback LSV, without Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  58. Moomba® Outback LSV, without Swim Platform, No Tower (2006 - 2007): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  59. Moomba® Outback LSV, without Tower, with Swim Platform (2002 - 2003): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  60. Moomba® Outback LSV, with Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  61. Moomba® Outback LSV, with Swim Platform, No Tower (2006 - 2007): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  62. Moomba® Outback LS, with Factory Tower, with Swim Platform (2002 - 2003): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  63. Moomba® Outback LS, without Swim Platform, No Tower (1997 - 2001): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  64. Moomba® Outback LS, without Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  65. Moomba® Outback LS, without Swim Platform, No Tower (2006 - 2007): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  66. Moomba® Outback LS, without Tower, with Swim Platform (2002 - 2003): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  67. Moomba® Outback LS, with Swim Platform, No Tower (2004 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  68. Moomba® Outback LS, with Swim Platform, No Tower (2006 - 2007): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  69. Moomba® Outback, No Tower, No Swim Platform (1997 - 2001): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  70. Moomba® Outback V, without Swim Platform, No Tower (2006 - 2008): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  71. Moomba® Outback V, with Swim Platform, No Tower (2006 - 2008): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  72. Moomba® Outback, with Factory 2-Leg per Side Tower Upright, with Swim Platform (1998 - 2002): Custom Fit™ Boat Cover, Bimini-Top/Boot
  73. Moomba® Outback, with Factory Rad-A-Cage (tm) Tower and Swim Platform (2009 - 2012): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  74. Moomba® Outback, with Factory Rad-A-Cage (tm) Tower, without Swim Platform (2009 - 2012): Custom Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  75. Moomba® Outback, without Swim Platform, No Tower (1997 - 2001): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  76. Moomba® Outback, without Swim Platform, No Tower (2006): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit
  77. Moomba® Outback, with Swim Platform, No Tower (1997 - 2005): Styled To Fit™ Boat Cover, Bimini-Top/Boot, Shade Kit

Moomba®: Momba® is a manufacturer of high end ski and wake boats.

Factory Original-Equipment-Manufacturer (OEM) Canvas for Moomba® boats: RNR-Marine™ is a leading dealer for who patterned and manufactured Factory Original-Equipment-Manufacturer (OEM) canvas for Moomba® 20-22 Mobius, Outback and Kamberra boats from 2001 to current.

We produce new canvas (diagram explaining what each piece of canvas is called) in the Black, Cadet Grey and Linen Sunbrella fabric colors originally offered by Moomba®, or any color you like. Note: Zippers on OEM Moomba® canvas are size #8 (6 teeth/inch). Moomba® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Moomba® boats over 2 years old. Moomba® OEM canvas part number scheme: Great Lakes® tags p/n [yySCmmm mm tar-xxxxx-fcc] where [yy] is the year, [SC] is Skiers Choice® [mmm mm] is the model ([20 OB ] for example), [t] is the type of windshield (S=Std or W=optional stainless), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Moomba® Hull Identification Number (HIN) = MBFsssssmbyy , where [yy] = model-year. Specifications, care and cleaning of Sunbrella , and other canvas materials are detailed below. In some cases (if the boat mfgr is out of business for example) you can upgrade the windows to Strataglass coated clear vinyl (approx. 50-60 percent more cost), however the standard Eisenglass (clear vinyl) will last for many years with proper care, cleaning and storage. We utilize our library of 1,000's of patterns to produce new, "made-to-order" Factory Original canvas for your Moomba® boat. This is the same canvas originally offered from the Moomba® Factory and sold by your local Moomba® dealer (local dealers may only go back 5 years or so however, and charge local sales tax, which we do not charge except in SC and FL). No other canvas manufacturer has these patterns or the ability to produce the exact factory Original Equipment Manufacturer (OEM) replacement canvas and covers that were offered from the Moomba® Factory when your boat was new.

Please be sure that you have the Factory Moomba® frame or matching canvas.
Zipper Sizes #8 and #10
Size #10 (5 teeth/inch) and #8 (6 teeth/inch) zipper comparison and measurement
There are no cancellations, refunds or returns on Factory OEM canvas, since it is all "made-to-order" for you. Some owners (and even dealers, when new) installed their own "after-market" Bimini Tops, T-Tops, Hard-Tops and Canvas, so please:

  1. Compare your canvas or frame to the Moomba® factory OEM photos shown here,
  2. Check for tags with Moomba® OEM part numbers on existing canvas,
  3. Verify that your existing canvas has # 8 gauge zippers (factory original-equipment Moomba® OEM zipper size):
    • #8 gauge zippers have 6 teeth per inch and will NOT zip to #10 zippers,
    • #10 gauge zippers have 5 teeth per inch and will NOT zip to #8 zippers,
    • See zipper size comparison photo at right,
    • Please note that after-market canvas makers often use the large #10 gauge zippers.
    • The zipper gauge size is actually the height of the teeth, 8mm or 10mm tall for example. (#8 has 8mm tall teeth and #10 is 10mm tall for example). Since it is very difficult to measure the zipper tooth height, the easiest way to measure zipper size is to count the number of teeth over 2 inches: a #8 zipper has 12 teeth over 2 inches and a #10 zipper has 10 teeth over 2 inches.

Additional Shade for Moomba® boats : When its hot you can never have enough shade. Our Boat Shade Kits (starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale)) extend shade over the cockpit or bow (can even be used like a Spray-Dodger) and can be put up or taken down in minutes.

Factory Original-Equipment (OEM) Covers for Moomba® boats : We offer Factory OEM Bow and Cockpit Covers (typically in durable Sunbrella®) to fit your Moomba® boat perfectly.

Custom After-Market Covers for Moomba® boats : We also offer after-market Carver® Custom-Fit™ Boat Covers (from $239), Styled-To-Fit™Boat Covers (from $229) and in Sunbrella® marine fabric (the best quality, breathable fabric for covers) as well as some excellent high-quality, but less expensive materials, that are designed as an "Exact Fit" using measurements taken from your particular model of outboard motor.

Moomba® Boat Resources:

Factory OEM and After-Market Canvas

    >
  • Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas that has been sitting on the shelf for years.

  • We make Brand New Canvas Made TO ORDER using the original factory OEM patterns and the following material choices:

  • Marine Canvas choices (dependent on fabric offered by original boat manufacturer):

    • Sunbrella® 9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric Sunbrella® Color Swatches is a tough, water repellent (Fluorocarbon coated), UV resistant, color-fast (the acrylic fiber is dyed before the fabric is woven), breathable (will help keep things dry) woven fabric, manufactured by Glen Raven Mills in Anderson, SC, USA. Sunbrella® is available in a wide variety of colors. The name Sunbrella® is synonymous with the finest outdoor fabric in the world. Sunbrella® withstands sun, wind, and rain while remaining beautiful for years and is backed by a 10-year Limited Fabric Warranty. The water repellency of Sunbrella® can be improved by cleaning and applying "303 High Tech Fabric Guard" periodically. Sunbrella® was offered from the Factory for the OEM Canvas we make for most boat manufacturers, including: Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®, Rinker®, Larson®, Grady White®, Regal® and many more. RNR-Marine™ offers all "Sunbrella® Marine Top Fabric" colors (boat dealers may only have black), including popular Black, Captain Navy, Marine Blue, Mediterranean Blue Tweed, Pacific Blue, Forest Green, Logo Red, Jockey Red, Dubonnet Tweed, Linen, Linen Tweed, Toast Tweed, Silver, Beige and many more. To insure consistencey and avoid mis-matches, the factory original colors may only be offered for many boat manufcaturers. Colors will appear differently on your monitor than the actual fabric application.

    • SeaMark® SeaMark® colors SeaMark® Layers waterproof Sunbrella®, developed by Haartz® engineers who have expertly waterproofed Sunbrella®, the premier woven acrylic fabric, by undercoating the Sunbrella® fabric with a textured marine grade vinyl. SeaMark® offers the best of both worlds - a beautiful, colorfast fabric with the added durability of vinyl. This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength, backed by a 5-year manufacturer's warranty, and is available in many Sunbrella® solid and tweed colors. SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas on many Sea Ray®, Boston Whaler®, Formula®, Chaparral®, Rinker® and Regal® convertible, bimini, sunshade and camper tops for example. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.

    • Ferrari® Stamoid®® waterproof PVC coated, polyester reinforced vinyl "Top" fabric is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric, backed by a 5-year Limited Fabric Warranty. Although Stamoid® is made in a variety of colors, we typically offer only white (Ivory for Grady White®), as used on many yachts.

    • Recacril® Some of our Factory OEM canvas was offered in Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric manufactured by Recasens® USA. as selected by the boat manufacturer. Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric for marine and outdoor use. It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance and is woven in over 50 solid colors and over 80 stripes, although only a limited selection of solid colors are offered for our marine canvas. In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers, and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.

    • Weblon® (Herculite®) Regatta® vinyl-laminated polyester yacht fabric is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric, backed by a 5-year Limited Fabric Warranty. We offer Weblon® in ANY "Weblon® Yacht Fabric" color: White, Ivory, Black, White-top/Mist-Blue-bottom, White-top/Driftwood(gray)-bottom, White-top/Foam-Green-bottom, Ivory-top/Sand-bottom & Burgundy-top/White-bottom. Not all colors may be available for every canvas product. Colors will appear differently on your monitor than the actual fabric application.

    • ClimaShield® Plus ClimaShield-Plus® colors Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are individually dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • Aqualon® Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric that was offered by the boat manufacturer. Aqualon® is a pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • MarChem CFI® Top Gun® acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier) is made by MarChem® CFI in New Haven, MO, USA using a proprietary process to coat both the top and bottom, thus allowing the fabric to be completely reversible. Water repellect Top Gun™ fabric is characterized by excellent strength, durability, tear and abrasion resistance, dimensional stability, UV and mildew resistance, and is backed by a 5-year Limited Fabric Warranty. We offer Top Gun™ in very few applications.

    • Vinyl ... Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

    • RNR-Marine™ recommends cleaning your canvas or cover to maintain its original beauty and increase longevity.

  • Covers are made of a fabric with a weave that can "breathe" to prevent mold and mildew. Vinyl or vinyl coated fabric, such as Weblon®, Stamoid®, Top Gun® or SeaMark® are not recommended for covers, since the material does not breathe to ventilate the covered space. We offer covers (depending on boat manufacturer) in one or more of the following fabrics:

    • Sunbrella® Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric is used for Console-Covers, OEM Seat-Covers, OEM Leaning-Post-Covers, Bow Covers, Cockpit Covers and Mooring Covers. This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant, and is backed by the Sunbrella® 10-year Limited Fabric Warranty. Sunbrella® is the premium cover fabric in our opinion, since it is tough, breathes and the fabric is woven with solution dyed acrylic fibers, which last longer than polyester and retain colors extremely well. Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®, and is offered for all of our Factory OEM canvas and covers, as well as our Carver® after-market Custom-Fit™, Styled-To-Fit™ Boat Covers and Bimini Tops.

    •  Top-Notch-Elite® 100% Solution Dyed 9 oz./sq.yd. Polyester fabric (in Grey, Tan, Navy Blue or Black) is used for TTopCovers® T-Top/Hard-Top Boat Covers and T-Top Center Console Storage Curtains. Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant, dimensionally stable (won't sag or stretch) and mildew resistant. Because the yarn is solution dyed, color fastness is very good. Top-Notch Elite® is backed by a 5-year Limited Fabric Warranty.

    •  WeatherMax® 100% Solution Dyed 8 oz./sq.yd. Polyester fabric (in Navy Blue or Black) is used for T-Top Boat Covers and T-Top Center Console Storage Curtains. Weathermax-80® is 100% solution dyed polyester incorporating UV resistant characteristics for long-term color and strength retention along with excellent breathablity and abrasion resistance. The HydroMAX® finish raises the bar of hydrostatic performance and delivers unsurpassed water repellency, mildew and oil resistance without relying on environmentally unfriendly coating compounds. WeatherMAX® has anti-microbial properties and a minimum UV resistance of 1000 hours but only weighs 8.0 oz. per square yard due to the use of a filament rather than a spun yarn like acrylic fabrics. Excellent for anything from horse blankets to tough outerwear to marine grade tarps. WeatherMAX® is backed by a 5-year Limited Fabric Warranty.

    • Sun-DURA® heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric with a 100% polyurethane finish coating with a is used for Carver® Custom-Fit™, Styled-To-Fit™ Trailerable and Over-Top Boat Covers, Universal Seat-Covers and Universal Leaning-Post Covers. 100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries. Carver® Sun-DURA® is backed by a 7 Year Limited Warranty.

    • Black Resilience is a proprietary tough, black or white stretchy fabric (like Spandex) with a quadruple coating on the outside to reflect the sun to keep things cool beneath. We use Resilience™ on our T-Top-Storage-Bonnet (1-Year Limited Warranty) and T-Top-Dry-Stack-Covers (3-Year Limited Warranty). This is the same fabric made for the US Government to cover fuel storage tanks in the desert to keep them cool. The Limited Warrnty on these products includes free repair for any damage caused by poor workmanship (excludes abuse).

    • ClimaShield® Plus Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric as offered by the boat manufacturer. ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn (solution dyed so the fibers that make the threads are indvidualy dyed) to provide superior fade resistance, product longevity and durability. Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew. pigmented vinyl coated (always white vinyl on the inside), 9oz./sq.yd. 2-ply polyester fabric with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.

    • Poly/Cotton Duck ... 50/50 polyester/cotton "Duck" fabric (from Dutch "doek") is a heavy, plain woven blended fabric offering the advantages of both cotton and polyester fibers blended in one fabric. Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat. However, as the thickness increases, the breathability decreases. 100% cotton tends to rip and wear out easily, depending on the weave. Cotton canvas is a very durable and abrasion-resistant fabric, but it can be very thick and heavy. Polyester does not breathe, but it is very elastic and therefore tends to be very tear resistant. However, it is not as abrasion-resistant as cotton canvas. Poly/Cotton blend fabrics combine the strengths of the two fibers. Poly/cotton fabric is breathable, tear-resistant, and can be fashioned into abrasion-resistant fabrics, like canvas. We make many older Factory OEM Mooring Covers (to order) in Grey #6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.

    • Vinyl ... Some of our Factory OEM covers are available in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

  • Phiferext® open weave vinyl covered polyester "Standard Mesh Solids" fabric (very breathable) is used on Gear-Nets and Mesh Windshield-Covers. Although there are a wide variety of Phifertex® colors, most Gear-Nets and Windshield-Covers are Black, Grey or White.

  • Visors, Connectors, Spray-Shields, Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings are typically made with a combination of canvas (above) and either:

    • Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl (often called "Eisenglass" or "Isinglass") as specified by the boat manufacturer. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.

      or

    • Strataglass® premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost) engineered to be ultra clear and resistant to the damaging effects from the sun's rays, environmental fallout and scratching from handling. It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC). Read more about Strataglass® advantages. Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick), 40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness. The 40-mil is available in a clear, light smoke or dark smoke tint, which is a special order (adds another 10% to the cost and 2 more weeks). We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore. Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled. Strataglass® claims a 5 year life expectancy (care & exposure dependent), but notes that many yacht owners see 10 or more years of use with proper care.

    • RNR-Marine™ recommends cleaning and removing all clear-vinyl prior to trailering, to avoid the harmful efects of rocks, bugs and oils on the vinyl!


All Products are Made in the USA
RNR-Marine, Inc. is Verified by PayPal's Verification Seal Image
Sponsor, TheHullTruth.com
Sponsor

Some photos show optional items mounted on standard products. Descriptive, typographical or photographical errors are subject to correction. Valid HTML 4.01 Transitional Valid CSS! 18.117.70.64 ,