|
© 2003-2024 |
22 Bluewater (1998) _Sea-Pro-180cc_In-Water_Port-Rear.jpg "T-Topless-2™ Folding Stainless Steel T-Top in Sunbrella^®^;")
T-Topless-2™ Folding Stainless Steel T-Top in Sunbrella® Marine Fabric 
TTopCover™ Under T-Top Boat-Cover covers entire boat and motor under T-Top 
Carver® T-Top/Hard-Top Boat-Cover goes over entire Top, Console, Seats, Boat and Motor 
T-Top Mooring Cover cover Center Console, Electronics, Instruments, Helm Seat or Leaning Post and Front Seat... great for storage or in-water use 
Carver® Center Console, NO Bow Rails, Single Engine Boat Cover covers Center Console Boat with Single Engine and NO/Low Bow Rails (No T-Top) 
Carver® Center Console, HIGH Bow Rails, Single Engine Boat Cover covers Center Console Boat with Single Engine and High Bow Rails (No T-Top) 
Carver® Center Console, HIGH Bow Rails, Twin Engine Boat Cover covers Center Console Boat with Twin Engines and High Bow Rails (No T-Top) 
Sunbrella® Center Console Cover (univesal) protects Center Console, Electronics and Instruments 
Leaning-Post Cover (universal) 
Reversible (Flip-Flop or Pilot) Seat Cover (universal) 
Shade-Extension Kit attaches to your existing top to provide more shade for your family 
Pro Sports® Factory Original-Equipment Sunbrella® Marine Canvas 
|
Home ▶ Pro Sports ▶ Pro Sports 22 ▶ 1998 Pro Sports 22 Bluewater
Pro Sports® 22 Bluewater (1998) center console boat:
- .
- Zippers on OEM ProSports® canvas are size #8 (6 teeth/inch).
- ProSports® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps).
- ProSports® OEM canvas part number scheme: GLBT® tags p/n [yyPSmmm mm par-xxxxx-fcc], where [yy] is the year, [NS] is ProSports, [mmm mm] is the model, [p] is the power (I=Inboard, O=Outboard), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (u=Outdura®, A=Sunbrella® acrylic) and [cc] is the color code.
- ProSports® HIN = WJIsssssmbyy , where [yy] = model year.
- All OEM canvas and covers listed below are made using the original, digitized patterns approved by Pro Sports®.
- Choose ANY available color (from our list) , see our Sunbrella® Color Swatch Chart to select your color.
- Factory OEM Canvas, Covers and Tops
are sold through American Boat Canvas™, Inc. and American Boat Gear™, Inc. DBA American Boat Canvas™, Inc.
is rated 5.0 / 5.0
based on 3
American Boat Canvas™ customer reviews on Facebook®
★★★★★
- Boat Covers, Carpet, TTopCovers™, T-Topless™, etc. are sold by RNR-Marine™, Inc. and 
RNR-Marine™ is rated 4.53 / 5.0
based on 149
RNR-Marine™ Customer reviews
and 24
Better Business Bureau® reviews
★★★★✬
- T-Topless™ - Our newly redesigned (and lower cost) T-Topless-2™ (TT2™) patent-pending, stainless steel, folding T-Top for 15-22' center console boats (plus optional Spray-Shield and Gear-Loft) (Sunbrella 9.25oz./sq.yd. acrylic fabric) custom made for the 1998 Pro Sports® 22 Bluewater , $1,443.00 , SALE PRICE: $1,298.70 (Fall Sale) " Lead time est: 4-8 biz days (November 2024 for Montauk-T-Topless) after order finalization as of 10/21/24. "
- TTopCover™ T-Top Boat Cover-Sunbrella - Custom fit TTopCover™ (Sunbrella® 9.25oz./sq.yd. solution dyed acrylic fabric), which attaches beneath the factory installed T-Top or Hard-Top to cover the entire boat and motor(s) custom made for the 1998 Pro Sports® 22 Bluewater , varies $1,001 to $2,951 (Email for price) " Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24. "
- TTopCover™ T-Top Boat Cover-Elite - Custom fit TTopCover™ (Elite® Top Notch™ 9oz./sq.yd. fabric) which attaches beneath the factory installed T-Top or Hard-Top to cover the entire boat and motor(s) custom made for the 1998 Pro Sports® 22 Bluewater , varies $909 to $5,574 (Email for price) " Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24. "
- Bimini-Top Canvas (OEM) - Factory Bimini Replacement CANVAS (NO frame) with Zippers for OEM front Visor and Curtains (Not included), OEM (Original Equipment Manufacturer) (Sunbrella fabric) custom made for the 1998 Pro Sports® 22 Bluewater , varies $569 to $2,462 (Email for price) " We no longer sell this product online. Please Email... "
- Bimini-Top Frame (OEM) - Factory Bimini FRAME (No Canvas), OEM (Original Equipment Manufacturer) (Aluminum or Stainless Steel (see model notes) fabric) custom made for the 1998 Pro Sports® 22 Bluewater , varies $416 to $2,765 (Email for price) " We no longer sell this product online. Please Email... "
- Bimini-Boot (OEM) - Factory Zippered Bimini BOOT COVER, OEM (Original Equipment Manufacturer) (Sunbrella fabric) custom made for the 1998 Pro Sports® 22 Bluewater , varies $148 to $486 " We no longer sell this product online. Please Email... "
- T-Top Mooring Cover - Great for In-Water, Lift, Dry-Stack, Float-Dock or Trailer storage. Easy to install: attaches to T-Top to completely cover the entire Center Console, Helm Seats (or Leaning-Post) and the Cooler or Seat in front of the Console on the Pro Sports® 22 Bluewater , (click link to pick size) Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24.
- Carver® Over T-Top Boat Cover - Carver® Over T-Top cover (SunDura® 7oz./sq.yd. fabric) goes over the Pro Sports® 22 Bluewater's T-Top (or Hard-Top) to cover and protect the entire top, console, seats, boat and motor , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Carver® NO/Low Bow Rail, Single Engine Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, Center Console Boat (and Motor) with NO/Low Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Carver® HIGH Bow Rail, Single Engine, V-Bow Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, V-Bow Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Carver® HIGH Bow Rail, Single Engine, Round Bow Boat Cover, Sunbrella® - Trailerable boat cover for Single Engine, Rounded Bow (Whaler Style) Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Carver® HIGH Bow Rail, Twin Engine Boat Cover, Sunbrella® - Trailerable boat cover for Twin Engine Center Console Boat (and Motor) with HIGH Bow Rails, without T-Top (Sunbrella® 9.25 oz./sq.yd. fabric) , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Leaning-Post Cover (universal) - Universal (non-OEM) Cover for many Leaning-Posts , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Center-Console Cover (universal) - Sunbrella® Console Covers (non-OEM) in 3 sizes , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Reversible Seat Cover (universal) - Universal (non-OEM) Reversible-Seat Cover for most Flip-Flop and Reversible Pilot Seats , (click link to pick size) Lead time est: 1.5-2.5 weeks (Covers, Tops), 4-5 biz days for poles and straps after order finalization as of 10/21/24.
- Black or White Bimini or T-Top Extension Kit - Our unique Shade Extension kit attaches to the back of the Bimini or T-Top on the 22 Bluewater to extend shade over the cockpit (or bow) area with telescoping aluminum Support Poles , Black: $760.00 , SALE PRICE: $714.40 (Fall Sale) or White: $779.00 , SALE PRICE: $732.26 (Fall Sale) Lead time est. 2-4 weeks (TTopCovers, Curtains), 1-2 weeks (Shade Kits) after order finalization as of 10/21/24.
Canvas, Covers and Tops are all custom made-to-order and typically ship in 2-11 weeks
(check your cart for actual lead time).
(check your cart for actual lead time).
Pro Sports®:
Started in Tennessee in 1980, Pro Sports® moved to Alabama before closing in 2008. Pro Sports® motto was always "... Come Ride With Us" and offered a lifetime hull warranty against rot, as well as a 10-year limited hull construction warranty.
In 2006: Pro Sports® Boats has made a significant transition in our business plan for 2006. We are now offering our boats under two separate brand names: ProKat® for the power catamarans and SeaQuest® for the monohulls.
Factory Original-Equipment-Manufacturer (OEM) Canvas for Pro Sports® boats: RNR-Marine™ is a leading dealer for who patterned and manufactured Factory Original-Equipment-Manufacturer (OEM) canvas for Pro Sports® 17-30' CC, DC, WA, Deck, SeaQuest, Bluewater, Kat and ProKat boats from 1996 to current.
We produce new canvas (diagram explaining what each piece of canvas is called) in the Black, Captain Navy and Cadet Grey Outdura(r) and some Sunbrella fabric colors originally offered by Pro Sports®, or any color you like. Note: Zippers on OEM ProSports® canvas are size #8 (6 teeth/inch). ProSports® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). ProSports® OEM canvas part number scheme: Great Lakes® tags p/n [yyPSmmm mm par-xxxxx-fcc], where [yy] is the year, [NS] is ProSports, [mmm mm] is the model, [p] is the power (I=Inboard, O=Outboard), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (u=Outdura®, A=Sunbrella® acrylic) and [cc] is the color code. ProSports® HIN = WJIsssssmbyy , where [yy] = model year. Windows are made with 30ga Eisenglass flat (not rolled) clear vinyl window material. Specifications, care and cleaning of Outdura(r) and some Sunbrella , 30ga Eisenglass flat (not rolled) clear vinyl and other canvas materials are detailed below. In some cases (if the boat mfgr is out of business for example) you can upgrade the windows to Strataglass coated clear vinyl (approx. 50-60 percent more cost), however the standard Eisenglass (clear vinyl) will last for many years with proper care, cleaning and storage. We utilize our library of 1,000's of patterns to produce new, "made-to-order" Factory Original canvas for your Pro Sports® boat. This is the same canvas originally offered from the Pro Sports® Factory and sold by your local Pro Sports® dealer (local dealers may only go back 5 years or so however, and charge local sales tax, which we do not charge except in SC and FL). No other canvas manufacturer has these patterns or the ability to produce the exact factory Original Equipment Manufacturer (OEM) replacement canvas and covers that were offered from the Pro Sports® Factory when your boat was new.
Please be sure that you have the Factory Pro Sports® frame or matching canvas.
Size #10 (5 teeth/inch) and #8 (6 teeth/inch) zipper comparison and measurement |
- Compare your canvas or frame to the Pro Sports® factory OEM photos shown here,
- Check for tags with Pro Sports® OEM part numbers on existing canvas,
- Verify that your existing canvas has # 8 gauge zippers
(factory original-equipment Pro Sports® OEM zipper size):
- #8 gauge zippers have 6 teeth per inch and will NOT zip to #10 zippers,
- #10 gauge zippers have 5 teeth per inch and will NOT zip to #8 zippers,
- See zipper size comparison photo at right,
- Please note that after-market canvas makers often use the large #10 gauge zippers.
- The zipper gauge size is actually the height of the teeth, 8mm or 10mm tall for example. (#8 has 8mm tall teeth and #10 is 10mm tall for example). Since it is very difficult to measure the zipper tooth height, the easiest way to measure zipper size is to count the number of teeth over 2 inches: a #8 zipper has 12 teeth over 2 inches and a #10 zipper has 10 teeth over 2 inches.
Since Pro Sports® is no longer in business and there are no longer any Pro Sports® dealers, RNR-Marine™ may be your only source for new (not new-old-stock) Factory Original-Equipment-Manufacturer (OEM) canvas and covers.
Additional Shade for Pro Sports® boats : When its hot you can never have enough shade. Our Boat Shade Kits (starting at $524.00 , SALE PRICE: $487.32 (End of Summer Sale)) extend shade over the cockpit or bow (can even be used like a Spray-Dodger) and can be put up or taken down in minutes.
Folding T-Tops to fit Pro Sports® boats: Our T-Topless™ folding T-Top` fits most Pro Sports® all center console boats. This top lowers (or removes) in less than 15 minutes to store your boat in your own garage or storage building/shed, potentially saving $1,000's per year in storage costs (or let you pass under a low bridge). The T-Topless™ folding T-Top is made of solid, yet lightweight, 1-inch diameter welded 316 Stainless Steel tubing with Sunbrella® canvas and install in an hour on the Stainless Steel windshield grab rails of Pro Sports® center console boats.
Factory Original-Equipment (OEM) Covers for Pro Sports® boats : We offer Factory OEM some Covers (typically in durable Sunbrella®) to fit your Pro Sports® boat perfectly.
Custom After-Market Covers for Pro Sports® boats : We also offer after-market Carver® Custom-Fit™ Boat Covers (from $239), Styled-To-Fit™Boat Covers (from $229) and in Sunbrella® marine fabric (the best quality, breathable fabric for covers) as well as some excellent high-quality, but less expensive materials, that are designed as an "Exact Fit" using measurements taken from your particular model of outboard motor.
For Center Console boats, we also offer Universal (Not OEM) Center Console (No T-Top) Covers, Leaning Post Seat Covers and Reversible (Flip-Flop) Seat Covers.
A popular solution for boats with T-Tops are our T-Top Console-Storage-Curtains, which completely cover the front cooler seat, entire console and helm seats or leaning post (starting at $484.00 , SALE PRICE: $454.96 (Winter Sale)). This is a nice alternative to the factory OEM console-cover and OEM leaning-post or OEM pedestal-seat-cover, typically costing less than the OEM console-cover alone.
Since Pro Sports® did not offer a factory mooring cover for boats with a T-Top, we offer custom-fit, durable TTopCover® Under T-Top Boat-Covers and Carver® Over T-Top Boat-Covers for Pro Sports® center console or walk-around cuddy boats with the Factory OEM T-Top or Hard-Top. We have patterned hundreds of boats and T-Tops, so search for your boat or email to see if we have patterned your boat
Pro Sports® Boat Resources:
- Even though Pro Sports® is no longer in business, online archives of many instances of the Pro Sports® web-site going back several years can still be found at http://web.archive.org/web/20050302013844/http://www.prosportsboats.com/
- Links to FREE Outboard Motor Manuals and Owners Guides can be found at RNR-Marine.com/Boat-Motor-Transmission-Manuals.shtml
Factory OEM and After-Market Canvas
-
>
- Our Factory OEM (Original Equipment Manufacturer) replacement canvas IS NOT "New Old Stock" (NOS) Canvas
that has been sitting on the shelf for years.
- We make Brand New Canvas Made TO ORDER using
the original factory OEM patterns
and the following material choices:
- Marine Canvas choices
(dependent on fabric offered by original boat manufacturer):
-
9.25 ounce (per square yard) 100% Solution Dyed Acrylic marine top fabric
is a tough, water repellent (Fluorocarbon coated), UV resistant,
color-fast (the acrylic fiber is dyed before the fabric is woven),
breathable (will help keep things dry) woven fabric,
manufactured by Glen Raven Mills in Anderson, SC, USA.
Sunbrella® is available in a
wide variety of colors.
The name Sunbrella® is synonymous with the finest outdoor fabric in the world.
Sunbrella® withstands sun, wind, and rain while remaining beautiful for years
and is backed by a
10-year Limited Fabric Warranty.
The water repellency of Sunbrella® can be improved by
cleaning and applying
"303 High Tech Fabric Guard" periodically.
Sunbrella® was offered from the Factory for the OEM Canvas
we make for most boat manufacturers, including:
Sea Ray®, Boston Whaler®, Chaparral®, Sea-Pro®,
Rinker®, Larson®, Grady White®, Regal® and many more.
RNR-Marine™ offers all
"Sunbrella® Marine Top Fabric" colors
(boat dealers may only have black), including popular
Black,
Captain Navy,
Marine Blue,
Mediterranean Blue Tweed,
Pacific Blue,
Forest Green,
Logo Red,
Jockey Red,
Dubonnet Tweed,
Linen,
Linen Tweed,
Toast Tweed,
Silver,
Beige and many more.
To insure consistencey and avoid mis-matches, the factory original colors
may only be offered for many boat manufcaturers.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof Sunbrella®,
developed by
Haartz® engineers who have expertly waterproofed Sunbrella®,
the premier woven acrylic fabric, by
undercoating the Sunbrella® fabric with a textured marine grade vinyl.
SeaMark® offers the best of both worlds -
a beautiful, colorfast fabric with the added durability of vinyl.
This "acrylic vinyl" 16 oz./sq.yd. fabric has superior seam and tensile strength,
backed by a 5-year manufacturer's warranty, and is available in
many Sunbrella® solid and tweed colors.
SeaMark® was offered exclusively or as a factory upgrade option for OEM Top Canvas
on many
Sea Ray®,
Boston Whaler®,
Formula®, Chaparral®, Rinker® and Regal®
convertible, bimini, sunshade and camper tops
for example.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
waterproof PVC coated, polyester reinforced vinyl "Top" fabric
is a slick, semi-shiny, durable, non-breathable, 60% higher cost fabric,
backed by a
5-year Limited Fabric Warranty.
Although Stamoid® is made in a
variety of colors, we typically offer only white (Ivory for Grady White®),
as used on many yachts.
-
Some of our Factory OEM canvas was offered in
Recacril® 9 oz./sq.yd. Solution Dyed Acrylic marine fabric
manufactured by Recasens® USA.
as selected by the boat manufacturer.
Recacril® is a 100% solution dyed, 9 ounce (per square yard) acrylic fabric
for marine and outdoor use.
It has a Flurocarbon/Resin coating to repel water and offer excellent UV resistance
and is woven in
over 50 solid colors
and over 80 stripes,
although only a limited selection of solid colors are offered for our marine canvas.
In some cases, Recacril® is no longer offered for factory OEM replacement canvas, curtains or covers,
and a similar (not exact shade in some cases) color Sunbrella® fabric is used as a replacement.
-
(Herculite®)
Regatta® vinyl-laminated polyester yacht fabric
is slick, semi-shiny, durable, non-breathable, waterproof canvas (~7.5oz per Sq Yd) fabric,
backed by a
5-year Limited Fabric Warranty.
We offer Weblon® in
ANY "Weblon® Yacht Fabric" color:
White,
Ivory,
Black,
White-top/Mist-Blue-bottom,
White-top/Driftwood(gray)-bottom,
White-top/Foam-Green-bottom,
Ivory-top/Sand-bottom &
Burgundy-top/White-bottom.
Not all colors may be available for every canvas product.
Colors will appear differently on your monitor than the actual fabric application.
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are individually dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anti-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Some of our Factory OEM canvas is available only in the original, white Aqualon® fabric
that was offered by the boat manufacturer.
Aqualon® is a pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
acrylic-coated 100% woven polyester 11.5 ounces (per square yard) fabric (600 denier)
is made by MarChem® CFI in New Haven, MO, USA
using a proprietary process
to coat both the top and bottom,
thus allowing the fabric to be completely reversible.
Water repellect Top Gun™ fabric is characterized by
excellent strength, durability,
tear and abrasion resistance,
dimensional stability, UV and mildew resistance,
and is backed by a
5-year Limited Fabric Warranty.
We offer Top Gun™ in very few applications.
-
Vinyl ...
Some of our aftermarket Tops and Factory OEM canvas are offered in marine grade Vinyl fabric.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
- RNR-Marine™ recommends cleaning your canvas or cover to maintain its original beauty and increase longevity.
-
- Covers
are made of a fabric with a weave that can "breathe"
to prevent mold and mildew.
Vinyl or vinyl coated fabric, such as
Weblon®, Stamoid®, Top Gun® or SeaMark® are not
recommended for covers, since the material does not breathe to ventilate the covered space.
We offer covers (depending on boat manufacturer) in one or more of the following fabrics:
-
Solution Dyed 100% Acrylic 9.5 oz./sq.yd. marine fabric
is used for
Console-Covers,
OEM Seat-Covers,
OEM Leaning-Post-Covers,
Bow Covers,
Cockpit Covers and
Mooring Covers.
This durable, 9.5 ounce per square yard fabric is colorfast and mildew resistant,
and is backed by the
Sunbrella® 10-year Limited Fabric Warranty.
Sunbrella® is the premium cover fabric in our opinion, since it is tough,
breathes and the fabric is woven with solution dyed acrylic fibers,
which last longer than polyester and retain colors extremely well.
Sunbrella® is made in the US (Anderson, SC) by Glenn Raven Mills®,
and is offered for all of our Factory OEM canvas and covers,
as well as our Carver® after-market
Custom-Fit™, Styled-To-Fit™
Boat Covers and Bimini Tops.
-
100% Solution Dyed 9 oz./sq.yd. Polyester fabric
(in Grey, Tan, Navy Blue or Black)
is used for
TTopCovers® T-Top/Hard-Top Boat Covers and
T-Top Center Console Storage Curtains.
Top-Notch® Elite® is breathable, reversible, water repellent, UV resistant,
dimensionally stable (won't sag or stretch) and mildew resistant.
Because the yarn is solution dyed, color fastness is very good.
Top-Notch Elite® is backed by a
5-year Limited Fabric Warranty.
-
100% Solution Dyed 8 oz./sq.yd. Polyester fabric
(in Navy Blue or
Black)
is used for
T-Top Boat Covers and
T-Top Center Console Storage Curtains.
Weathermax-80® is 100% solution dyed polyester
incorporating UV resistant characteristics for long-term color and strength retention
along with excellent breathablity and abrasion resistance.
The HydroMAX® finish raises the bar of hydrostatic performance and
delivers unsurpassed water repellency, mildew and oil resistance
without relying on environmentally unfriendly coating compounds.
WeatherMAX® has
anti-microbial properties
and a minimum UV resistance of 1000 hours
but only weighs 8.0 oz. per square yard
due to the use of a filament rather than a spun yarn like acrylic fabrics.
Excellent for anything from horse blankets to tough outerwear to marine grade tarps.
WeatherMAX® is backed by a
5-year Limited Fabric Warranty.
-
heavy duty, 600-denier, 7.6oz./sq.yd. solution dyed, marine grade polyester fabric
with a 100% polyurethane finish coating with a
is used for
Carver®
Custom-Fit™, Styled-To-Fit™ Trailerable and
Over-Top Boat Covers,
Universal Seat-Covers and
Universal Leaning-Post Covers.
100% Solution Dyed polyester means Sun-DURA® colors are part of the polyester fiber itself,
rather than the dye adhering only to the surface of the fibers.
7.6 ounce per square yard marine grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear.
Carver®'s own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat.
Made in USA by Glen Raven Mills® (North Carolina manufacturer of Sunbrella®) for Carver® Industries.
Carver® Sun-DURA® is backed by a
7 Year Limited Warranty.
-
Black Resilience™
is a proprietary tough, black or white stretchy fabric (like Spandex)
with a quadruple coating on the outside to reflect the sun to
keep things cool beneath.
We use Resilience™ on our
T-Top-Storage-Bonnet (1-Year Limited Warranty) and
T-Top-Dry-Stack-Covers (3-Year Limited Warranty).
This is the same fabric made for the US Government to cover fuel storage tanks
in the desert to keep them cool.
The Limited Warrnty on these products includes free repair for any damage
caused by poor workmanship (excludes abuse).
-
Some of our Factory OEM canvas is offered in ClimaShield® Plus fabric
as offered by the boat manufacturer.
ClimaShield® Plus is woven with Dowco®'s Color-Lok® polyester yarn
(solution dyed so the fibers that make the threads are indvidualy dyed)
to provide superior fade resistance, product longevity and durability.
Inclusion of water-resistant anit-microbial coatings make this fabric resistant to the growth of mildew.
pigmented vinyl coated (always white vinyl on the inside),
9oz./sq.yd. 2-ply polyester fabric
with a 5 year manufacturer's limited warranty, commercially offered in a variety of colors.
-
Poly/Cotton Duck ...
50/50 polyester/cotton "Duck" fabric
(from Dutch "doek")
is a heavy, plain woven blended fabric
offering the advantages of both cotton and polyester fibers blended in one fabric.
Cotton is a fully breathable fabric, which helps prevent mold and mildew in your boat.
However, as the thickness increases, the breathability decreases.
100% cotton tends to rip and wear out easily, depending on the weave.
Cotton canvas is a very durable and abrasion-resistant fabric,
but it can be very thick and heavy.
Polyester does not breathe, but it is very elastic and
therefore tends to be very tear resistant.
However, it is not as abrasion-resistant as cotton canvas.
Poly/Cotton blend fabrics combine the strengths of the two fibers.
Poly/cotton fabric is breathable, tear-resistant,
and can be fashioned into abrasion-resistant fabrics, like canvas.
We make many older Factory OEM Mooring Covers
(to order) in
Grey
#6 weight (13oz per 36"x22" piece) 50/50 Poly/Cotton Duck fabric.
- Vinyl ... Some of our Factory OEM covers are available in marine grade Vinyl fabric. Proposition 65 is a California law intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful. The law requires that businesses notify Californians prior to sale if a product contains certain chemicals. The law also requires that the manufacturer label the product with a warning. Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating). Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact. While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
-
-
open weave vinyl covered polyester "Standard Mesh Solids" fabric
(very breathable) is used on
Gear-Nets and Mesh Windshield-Covers.
Although there are a
wide variety of Phifertex® colors,
most Gear-Nets and Windshield-Covers are Black, Grey or White.
-
Visors, Connectors, Spray-Shields,
Enclosures, Side-Curtains, Aft-Curtains and Gull-Wings
are typically made with a combination of canvas (above) and either:
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl
(often called "Eisenglass" or "Isinglass")
as specified by the boat manufacturer.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
or
-
premium, flexible Urethane-coated poly-vinyl-chloride (PVC) sheet "glass" (60% higher cost)
engineered to be ultra clear and resistant to the damaging effects from the sun's rays,
environmental fallout and scratching from handling.
It also blocks out the UltraViolet (UV) spectrum of light (90% UVA, 99% UVB, 99% UVC).
Read more about
Strataglass® advantages.
Strataglass® is available in 20-mil (0.020"), 30-mil (aka 30ga = 0.030" thick),
40-mil (0.040") or 60-mil (0.060" = ~1/16") thickness.
The 40-mil is available in a clear, light smoke or dark smoke tint,
which is a special order (adds another 10% to the cost and 2 more weeks).
We recommend 30-mil for fishing boats, since the thicker vinyl is hard to roll up offshore.
Yachts may use 40-mil or 60-mil (even more costly) when the vinyl is seldom (if ever) rolled.
Strataglass® claims a
5 year life expectancy (care & exposure dependent),
but notes that many yacht owners see 10 or more years of use with proper care.
- RNR-Marine™ recommends cleaning and removing all clear-vinyl prior to trailering, to avoid the harmful efects of rocks, bugs and oils on the vinyl!
- Flat, extruded 30-mil (0.030" thick, often called "30ga" or "30 gauge") clear, marine grade vinyl
(often called "Eisenglass" or "Isinglass")
as specified by the boat manufacturer.
Proposition 65 is a California law
intended to protect consumers in the state of California from exposure to certain chemicals that may be harmful.
The law requires that businesses notify Californians prior to sale if a product contains certain chemicals.
The law also requires that the manufacturer label the product with a warning.
Vinyl often contains the chemical Diisononyl Phthalate (DINP) which is on the list of chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
DINP belongs to a family of chemicals commonly added to plastics to make them flexible (products such as garden hoses, athletic shoes, automobile and marine seating).
Exposure occurs through ingestion, inhalation and, to a lesser extent, dermal contact.
While such products are perfectly safe to use in their intended manner, the law still requires that we warn Californians of the presence of the chemical.
is a tough, water repellent (Fluorocarbon coated), UV resistant,
color-fast (the acrylic fiber is dyed before the fabric is woven),
breathable (will help keep things dry) woven fabric,
manufactured by Glen Raven Mills in Anderson, SC, USA.
Sunbrella® is available in a
Sponsor |
Some photos show optional items mounted on standard products.
Descriptive, typographical or photographical errors are subject to correction.
18.219.159.197 ,
|
